With the rapid development of the communication industry in the fifth generation and the advance towards the intelligent society of the sixth generation wireless networks, traditional methods are unable to meet the ever‐growing demands for higher data rates and improved quality of service. Deep learning (DL) has achieved unprecedented success in various fields such as computer vision, large language model processing, and speech recognition due to its powerful representation capabilities and computational convenience. It has also made significant progress in the communication field in meeting stringent demands and overcoming deficiencies in existing technologies. The main purpose of this article is to uncover the latest advancements in the field of DL‐based algorithm methods in the physical layer of wireless communication, introduce their potential applications in the next generation of communication mechanisms, and finally summarize the open research questions.

This article is to uncover the latest advancements in the field of deep learning‐based algorithm methods in the physical layer of wireless communication. It introduces their potential applications in the next generation of communication mechanisms, and summarizes the open research questions.image

Internet of Things (IoT) based healthcare applications are time‐sensitive and any delay can cause alarming situations, including death of patients. The Earliest Deadline First (EDF) scheduling scheme has been proposed for use in IoT‐based healthcare applications. However, the EDF scheme performs poorly under overloaded conditions due to giving highest priority to packets that are close to missing their deadlines. Some studies have proposed the use of Priority EDF to overcome the challenges of EDF; however, Priority EDF still favours higher priority queues which increases the waiting times of lower priority queues. In order to overcome the limitation of EDF and its variants, this paper proposes a system model for a prioritized scheduling (PS) scheme. The PS scheme is an improvement of the Earliest Deadline First (EDF) scheme and its variants for IoT‐based healthcare applications. The PS scheme uses a heterogeneous multi‐server priority queuing system to provide service differentiation by prioritizing short packets over large packets and delay sensitive packets are serviced before delay tolerant packets. Numerical results demonstrate that the PS scheme minimizes the mean slowdown for both delay sensitive short and large packets at low and high load values. Additionally, the PS scheme performs better than the EDF and Priority EDF schemes in terms of reducing mean slowdown of packets and the PS scheme performs better than the EDF in terms of throughput for all packet sizes at both low and high load values. The performance improvement in terms of throughput is more pronounced at high load values. This addresses the challenge of the EDF scheme which performs poorly under overloaded conditions and the challenge of the Priority EDF scheme which favours higher priority queues at the expense of low priority queues.

While EDF scheduling scheme performs poorly under overloaded conditions for highly‐sensitive critical healthcare systems, priority EDF also favors higher priority queues which increases the waiting times of lower priority queues. Thus, study formulates a system model of a prioritized scheduling (PS) scheme that provides service differentiation in terms of delay sensitivity and packets sizes. The numerical results obtained show that PS scheme generally reduces the mean slow down for both delay sensitive short and large packets at high and low load values.image

This paper studies the problem of spatially correlated channel estimation for reconfigurable intelligent surface (RIS)‐assisted multiple‐input multiple‐output (MIMO) systems with arbitrarily correlated Gaussian perturbation. In particular, composite RIS channel estimation is first explored based on minimum mean square error (MMSE) method, and optimal training sequence design of pilots with MSE minimization. Applying the Kronecker‐structured model, correlated composite RIS‐related channels and correlated Gaussian perturbation are then characterized. The optimal training sequence structure and spatial training power allocation conditions are derived, and the choice of the optimal training sequence length is also analyzed. Finally, numerical results are provided to assess the performance of the proposed estimate method under different training sequence structures, the optimal length of the training sequence, and information statistics. Extensive numerical results show that the proposed estimate method has supreme performance compared to state of‐the‐art baseline methods (e.g. maximum likelihood and two‐sided linear channel estimation methods).

In this paper we examine the downlink channel estimation in a narrow‐band RIS‐ assisted MIMO communication system that is composed of one base station (BS) with M antennas, one RIS with N reflective elements or unit cells, and one user equipment (UE) with K antennas, as illustrated in Figure 1.image

This paper presents a multi‐input deep learning‐based joint pilot decontamination and symbol detection (SD) technique for 5G massive multiple‐input multiple‐output (MAMIMO) systems. It consists of a fully convolutional neural network (FCNN) that finds the 5G channel coefficients using pre‐known sounding reference signals (SRSs) under pilot contamination and a symbol detector derived from projected gradient descent iterations. The study considers pilot contamination caused by inter‐cell interferences between SRSs during channel estimation (CE). The proposed scheme accepts entire 5G orthogonal frequency modulated (OFDM) data and least square estimates and produces the transmitted OFDM signal. Simulation experiments demonstrated that the proposed technique has better CE and SD performance with reduced trainable parameters. Moreover, it is faster due to the lowest elapsed time during end‐to‐end OFDM symbol detection. This paper proposes a joint pilot decontamination and signal detection for 5G MAMIMO systems. It achieves better detection performance with the lowest number of trainable parameters and memory requirements. It is applicable in 5G OFDM symbol detection and channel estimation under pilot contamination.

This paper proposes a joint pilot decontamination and signal detection for 5G MAMIMO systems. It achieves better detection performance with the lowest number of trainable parameters and memory requirements. It is applicable in 5G OFDM symbol detection and channel estimation under pilot contamination.image

Orthogonal frequency division multiplexing (OFDM) technology has been increasingly applied to power line carrier communication (PLC). Discrete Fourier Transformation (DFT)‐based channel estimation algorithm is suitable for OFDM‐based PLC due to its low complexity. In view of the problem that the traditional DFT channel estimation does not consider the influence of noise inside cyclic prefix (CP), an improved DFT channel estimation based on signal‐to‐noise ratio (SNR) estimation is proposed. First, least‐square (LS) algorithm is performed and the frequency domain channel estimation is converted to the time domain through inverse DFT, and the average SNR of the system is estimated according to the pilot sequence. Second, the substitute SNR for each sample point inside CP is defined and used to filter impulse noise inside CP. Third, the average SNR is converted into the threshold of the useful signal energy inside CP, and the widespread background noise inside CP is filtered. The simulation results show that the proposed algorithm can obtain more accurate channel estimation than other DFT channel estimation algorithms because it can effectively filter out noise inside CP. In addition, compared with other similar algorithms, the proposed algorithm dose not result in a significant increase in complexity.

Discrete Fourier Transformation (DFT)‐based channel estimation algorithm is suitable for orthogonal frequency division multiplexing (OFDM)‐based power line carrier communication (PLC) system due to its low complexity. In view of the problem that the traditional DFT channel estimation algorithm does not consider the influence of noise inside cyclic prefix (CP), an improved DFT channel estimation algorithm based on signal‐to‐noise ratio (SNR) estimation is proposed.image