This is an open access article published by the IET under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0/)
Full text loading...
/deliver/fulltext/oap-cired/2017/1/OAP-CIRED.2017.0621.html;jsessionid=vlxha82pw7b1.x-iet-live-01?itemId=%2fcontent%2fjournals%2f10.1049%2foap-cired.2017.0621&mimeType=html&fmt=ahah
References
-
-
1)
-
8. Uddin, S., Shareef, H., Mohamed, A., et al: ‘Harmonics and thermal characteristics of low wattage LED lamps’, Prz. Elektrotech., 2012, 88, pp. 266–271.
-
2)
-
14. INMETRO Instituto Nacional de Metrologia, Qualidade e Tecnologia: , 2015.
-
3)
-
11. INMETRO Avaliação da Conformidade: Instituto Nacional de Metrologia e Qualidade: .
-
4)
-
6. ABILUX – Associação Brasileira da Industria de Iluminacao: . 2016, .
-
5)
-
10. Illuminating Engineering Society of North America: ‘The IESNA lighting handbook reference & application’. , 2000, pp. 20–25.
-
6)
-
12. INMETRO Instituto Nacional de Metrologia, Qualidade e Tecnologia: , 2010.
-
7)
-
2. Pereira, A.M.E., Teixeira, V.A., Fortes, M.Z., et al: ‘Some considerations about LED technology in public lighting’. Proc. of Chilecon 2015, 2015, .
-
8)
-
13. INMETRO Instituto Nacional de Metrologia, Qualidade e Tecnologia: , 2014.
-
9)
-
7. Principi, P., Fioretti, R.: ‘A comparative life cycle assessment of luminaires for general lighting for the office – compact fluorescent (CFL) vs light emitting diode (LED) – a case study’, J. Clean Prod., 2014, 83, pp. 96–107 (doi: 10.1016/j.jclepro.2014.07.031).
-
10)
-
15. Mansoor, A., Grady, W.M., Chowdhury, A.H., et al: ‘An investigation of harmonics attenuation and diversity among distributed single-phase power electronic loads’, IEEE Trans. Power Deliv., 1995, 10, pp. 467–473, (doi: 10.1109/61.368365).
-
11)
-
9. Pourarab, M.H., Nakhodchi, N., Monfared, M.: ‘Harmonic analysis of LED street lighting according to IEC61000-3-2; a case study’. Proc. CIRED Conf. 2015, 2015.
-
12)
-
5. Huang, B.J., Hsu, P.C., Wu, M.S., et al: ‘Study of system dynamics model and control of a high-power LED lighting luminaire’, Energy, 2006, 32, pp. 2187–2198, (doi: 10.1016/j.energy.2007.05.011).
-
13)
-
4. Tsao, J.Y.: ‘Solid-state lighting: lamps, chips, and materials for tomorrow’, IEEE Circuits Devices Mag., 2004, 20, pp. 28–37, (doi: 10.1109/MCD.2004.1304539).
-
14)
-
3. Lefevre, N., de T'Serclaes, P., Waid, P.: ‘Barriers to technology diffusion: the case of compact fluorescent lamps’. OECD, 2006, .
-
15)
-
11. Uddin, S., Shareef, H., Mohamed, A.: ‘Power quality performance of energy-efficient low-wattage LED lamps’, Measurement, 2013, 46, (10), pp. 3783–3795 (doi: 10.1016/j.measurement.2013.07.022).
http://iet.metastore.ingenta.com/content/journals/10.1049/oap-cired.2017.0621
Related content
content/journals/10.1049/oap-cired.2017.0621
pub_keyword,iet_inspecKeyword,pub_concept
6
6