© The Institution of Engineering and Technology
Tuneful behaviours of nano sized materials have been considered as challenge among researchers to explore the possibility of engaging in diverse applications. In particular, the zinc oxide (ZnO) nanostructured materials offer effective metallic behaviours to enhance the applications in the fuel oxidation, pigments, nonlinear optics and solar energy conversion. In the presented research, ZnO nanoparticles are successfully synthesised by (sol–gel and sol–gel and precipitation) techniques, respectively. The physicochemical behaviours of ZnO nanocrystals were inspected by x-ray diffraction, Fourier transform infrared, field-emission scanning electron microscopy, thermo-gravimetric analysis, N2 physisorption and NH3 temperature-programmed desorption techniques. The results revealed that Sol–gel method at lower pH produced smaller particle sizes with larger surface area and well-established morphology in shorter time at lower temperature conditions, in comparison to precipitation method with higher pH, time and temperature conditions, showed bigger particles with smaller surface area, respectively.
References
-
-
1)
-
7. Ludi, B., Niederberger, M.: ‘Zinc oxide nanoparticles: chemical mechanisms and classical and non-classical crystallization’, Dalton Trans., 2013, 42, (35), pp. 12554–12568 (doi: 10.1039/c3dt50610j).
-
2)
-
20. Hu, C., Mi, J., Shang, S., et al: ‘The study of thermal decomposition kinetics of zinc oxide formation from zinc oxalate dihydrate’, J. Therm. Anal. Calorim., 2014, 115, (2), pp. 1119–1125 (doi: 10.1007/s10973-013-3438-z).
-
3)
-
23. Zhang, Q., Chou, T.P., Russo, B., et al: ‘Cao G. Aggregation of ZnO nano crystallites for high conversion efficiency in dye-sensitized solar cells’, Angew Chem Int Ed Engl., 2008, 47, (13), pp. 2402–2406. (doi: 10.1002/anie.200704919).
-
4)
-
9. Hasany, S.F., Abdurahman, N.H., Sunarti, A.R., et al: ‘Magnetic iron oxide nanoparticles: chemical synthesis and applications review’, Curr. Nanosci., 2013, 9, pp. 561–575 (doi: 10.2174/15734137113099990085).
-
5)
-
10. Ghorbani, H.R., Mehr, F.P., Pazoki, H., et al: ‘Synthesis of ZnO nanoparticles by precipitation method’, Orient. J. Chem., 2015, 31, (2), pp. 1219–1221 (doi: 10.13005/ojc/310281).
-
6)
-
24. Lee, S.D., Nam, S.-H., Kim, M.-H., et al: ‘Synthesis and photocatalytic property of ZnO nanoparticles prepared by spray-pyrolysis method’, Phys. Proc., 2012, 32, pp. 320–326 (doi: 10.1016/j.phpro.2012.03.563).
-
7)
-
14. Kim, K.H., Utashiro, K., Abe, Y., et al: ‘Growth of zinc oxide nanorods using various seed layer annealing temperatures and substrate materials’, Int. J. ELectrocem. Sci., 2014, 9, pp. 2080–2089.
-
8)
-
17. Lv, Y., Lin, J., Peng, S., et al: ‘Effective ways to enhance the photocatalytic activity of ZnO nanopowders: high crystalline degree, more oxygen vacancies, and preferential growth’, New J. Chem., 2019, 43, p. 19223 (doi: 10.1039/C9NJ04767K).
-
9)
-
8. Jurablu, S., Farahmandjou, M., Firoozabadi, T.: ‘Sol-gel synthesis of zinc oxide (ZnO) nanoparticles: study of structural and optical properties’, J. Sci. Islamic Republic of Iran., 2015, 26, (3), pp. 281–285.
-
10)
-
22. Jadhav, N.A., Singh, P.K., Rhee, H.W., et al: ‘Effect of variation of average pore size and specific surface area of zno electrode (we) on efficiency of dye-sensitized solar cells’, Nanoscale Res. Lett., 2014, 9, (1), p. 575 (doi: 10.1186/1556-276X-9-575).
-
11)
-
21. Parvin, T., Keerthiraj, N., Ibrahim, A.I., et al: ‘Photocatalytic degradation of municipal wastewater and brilliant blue dye using hydrothermally synthesized surface-modified silver-doped ZnO designer particles’, Int. J. Photoenergy, 2012, 2012, p. 670610 (doi: 10.1155/2012/670610).
-
12)
-
15. Zhang, Y.L., Yang, Y., Zhao, J.H., et al: ‘Preparation of zno nanoparticles by a surfactant-assisted complex sol–gel method using zinc nitrate’, J. Sol-Gel Sci. Technol., 2009, 51, (2), pp. 198–203 (doi: 10.1007/s10971-009-1959-5).
-
13)
-
12. Chen, D., Jiao, X., Cheng, G.: ‘Hydrothermal synthesis of zinc oxide powders with different morphologies’, Solid State Commun., 1999, 113, (6), pp. 363–366 (doi: 10.1016/S0038-1098(99)00472-X).
-
14)
-
18. Qu, Q., Yan, C., Wan, Y., et al: ‘Effects of NaCl and SO2 on the initial atmospheric corrosion of zinc’, Corros. Sci., 2002, 44, (12), pp. 2789–2803 (doi: 10.1016/S0010-938X(02)00076-8).
-
15)
-
13. Wu, L., Wu, Y.: ‘Synthesis and optical characteristic of zno nanorod’, J. Mater. Sci., 2007, 42, (1), pp. 406–408 (doi: 10.1007/s10853-006-0727-y).
-
16)
-
1. Bacaksiz, E., Parlak, M., Tomakin, M., et al: ‘The effects of zinc nitrate, zinc acetate and zinc chloride precursors on investigation of structural and optical properties of zno thin films’, J. Alloys Compd., 2008, 466, (1), pp. 447–450 (doi: 10.1016/j.jallcom.2007.11.061).
-
17)
-
16. Gusatti, M., Rosário, J.A., Barroso, G.S., et al: ‘Synthesis of zno nanostructures in low reaction temperature’, Chem. Eng. Trans., 2009, 17, pp. 1017–1022.
-
18)
-
6. Lu, C.-H., Yeh, C.-H.: ‘Influence of hydrothermal conditions on the morphology and particle size of zinc oxide powder’, Ceramics Int., 2000, 26, (4), pp. 351–357 (doi: 10.1016/S0272-8842(99)00063-2).
-
19)
-
25. Mekki-Berrada, A., Grondin, D., Bennici, S., et al: ‘Design of amphoteric mixed oxides of zinc and group 3 elements (Al, Ga, In): migration effects on basic features’, Phys. Chem. Chem. Phys., 2012, 14, pp. 4155–4161. .
-
20)
-
4. Usman Ali, S.M., Ibupoto, Z.H., Kashif, M., et al: ‘A potentiometric indirect uric acid sensor based on ZnO nanoflakes and immobilized uricase’, Sensors, 2012, 12, pp. 2787–2797. (doi: 10.3390/s120302787).
-
21)
-
11. Kołodziejczak-Radzimska, A., Jesionowski, T.: ‘Zinc oxide – from synthesis to application: A review’, Materials, 2014, 7, (4), p. 2833 (doi: 10.3390/ma7042833).
-
22)
-
3. Usman Ali, S.M., Aijazi, T., Axelsson, K., et al: ‘Wireless remote monitoring of glucose using a functionalized ZnO nanowire arrays based sensor’, Sensors, 2011, 11, pp. 8485–8496. (doi: 10.3390/s110908485).
-
23)
-
2. Segets, D., Gradl, J., Taylor, R.K., et al: ‘Analysis of optical absorbance spectra for the determination of zno nanoparticle size distribution, solubility, and surface energy’, ACS Nano, 2009, 3, (7), pp. 1703–1710 (doi: 10.1021/nn900223b).
-
24)
-
5. Leofanti, G., Padovan, M., Tozzola, G., et al: ‘Surface area and pore texture of catalysts’, Catalysis Today., 1998, 41, (1–3), pp. 207–219 (doi: 10.1016/S0920-5861(98)00050-9).
-
25)
-
19. Nie, Y., Dong, Y., Bai, L., et al: ‘Fast oxidative desulfurization of fuel oil using dialkylpyridinium tetrachloroferrates ionic liquids’, Fuel, 2013, 103, (1), pp. 997–1002 (doi: 10.1016/j.fuel.2012.07.071).
http://iet.metastore.ingenta.com/content/journals/10.1049/mnl.2019.0795
Related content
content/journals/10.1049/mnl.2019.0795
pub_keyword,iet_inspecKeyword,pub_concept
6
6