© The Institution of Engineering and Technology
A series of conjugated donor–acceptor (D–A) block copolymers (BCPs) were synthesised using a one-pot Stille coupling polycondensation reaction. This involved reaction between a series of mono-bromo-functionalised Poly3-hexylthiophene (P3HT) polymers (P3HT-Br, Mn : 17, 21 and 43 kg/mol) and [N, N′-bis(2-decyl-tetradecyl)-1,7-dibromo-3,4,9,10-perylene diimide (PBI) and [2,5-bis(trimethylstannyl)-thiophene] (T) monomers. Purification using preparative gel permeation chromatography (GPC) removed any excess P3HT and resulted in BCPs with low polydispersity index values. The P3HT-b-PBIT BCPs were characterised using 1H-NMR and Fourier-transform infrared spectroscopy. When compared to a P3HT/PBIT polymer blend, the D–A BCP films exhibited a remarkably fine structure with a nanoscale morphology. These results indicated that these D–A BCPs have the potential for use as nanostructured active layers in polymer solar cells.
References
-
-
1)
-
18. Yu, G., Gao, J., Hummelen, J.C.: ‘Polymer photovoltaic cells-enhanced efficiencies via a network of internal donor-acceptor heterojunctions’, Science, 1995, 270, pp. 1789–1791 (doi: 10.1126/science.270.5243.1789).
-
2)
-
12. Lee, C., Li, Y., Lee, W., et al: ‘Correlation between phase-separated domain sizes of active layer and photovoltaic performances in all-polymer solar cells’, Macromolecules, 2016, 49, (14), pp. 5051–5058 (doi: 10.1021/acs.macromol.6b01069).
-
3)
-
6. Li, Z., Xu, X., Zhang, W., et al: ‘High performance all-polymer solar cells by synergistic effects of fine-tuned crystallinity and solvent annealing’, J. Am. Chem. Soc., 2016, 138, (34), pp. 10935–10944 (doi: 10.1021/jacs.6b04822).
-
4)
-
10. Huang, Y.-S., Westenhoff, S., Avilov, I., et al: ‘Electronic structures of interfacial states formed at polymeric semiconductor heterojunctions’, Nat. Mater., 2008, 7, p. 483 (doi: 10.1038/nmat2182).
-
5)
-
22. Nakabayashi, K., Mori, H.: ‘All-polymer solar cells based on fully conjugated block copolymers composed of poly(3-hexylthiophene) and poly(naphthalene bisimide) segments’, Macromolecules, 2012, 45, (24), pp. 9618–9625 (doi: 10.1021/ma302170e).
-
6)
-
5. Liu, Y., Zhao, J., Li, Z., et al: ‘Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells’, Nat. Commun., 2014, 5, p. 5293 (doi: 10.1038/ncomms6293).
-
7)
-
9. Zhao, R., Dou, C., Xie, Z., et al: ‘Polymer acceptor based on B←N units with enhanced electron mobility for efficient all-polymer solar cells’, Angew. Chem., Int. Ed., 2016, 55, (17), pp. 5313–5317 (doi: 10.1002/anie.201601305).
-
8)
-
2. Xue, Z., Wang, S., Yang, J., et al: ‘Enhanced power conversion efficiency in iridium complex-based terpolymers for polymer solar cells’, Flexible Electron., 2018, 2, (1), p. 1 (doi: 10.1038/s41528-017-0014-9).
-
9)
-
17. Ku, S.-Y., Brady, M.A., Treat, N.D., et al: ‘A modular strategy for fully conjugated donor–acceptor block copolymers’, J. Am. Chem. Soc., 2012, 134, (38), pp. 16040–16046 (doi: 10.1021/ja307431k).
-
10)
-
1. Meng, L., Zhang, Y., Wan, X., et al: ‘Organic and solution-processed tandem solar cells with 17.3% efficiency’, Science, 2018, 361, (6407), pp. 1094–1098 (doi: 10.1126/science.aat2612).
-
11)
-
11. Mitchell, V.D., Gann, E., Huettner, S., et al: ‘Morphological and device evaluation of an amphiphilic block copolymer for organic photovoltaic applications’, Macromolecules, 2017, 50, (13), pp. 4942–4951 (doi: 10.1021/acs.macromol.7b00377).
-
12)
-
15. Wang, S., Guo, Y., Yang, J., et al: ‘Engineering of energy levels for fully conjugated D-a block copolymers via tuning the ratios of donor P3HT and acceptor PNDIT’, Chin. J. Chem., 2015, 33, (8), pp. 865–872 (doi: 10.1002/cjoc.201500257).
-
13)
-
7. Gao, L., Zhang, Z.G., Xue, L., et al: ‘All-polymer solar cells based on absorption-complementary polymer donor and acceptor with high power conversion efficiency of 8.27%’, Adv. Mater., 2016, 28, (9), pp. 1884–1890 (doi: 10.1002/adma.201504629).
-
14)
-
21. Sommer, M., Komber, H., Huettner, S., et al: ‘Synthesis, purification, and characterization of well-defined all-conjugated diblock copolymers Pf8tbt-B-P3ht’, Macromolecules, 2012, 45, (10), pp. 4142–4151 (doi: 10.1021/ma300533k).
-
15)
-
8. Zhou, E., Cong, J., Wei, Q., et al: ‘All-polymer solar cells from perylene diimide based copolymers: material design and phase separation control’, Angew. Chem., Int. Ed., 2011, 50, (12), pp. 2799–2803 (doi: 10.1002/anie.201005408).
-
16)
-
4. Halls, J.J.M., Walsh, C.A., Greenham, N.C., et al: ‘Efficient photodiodes from interpenetrating polymer networks’, Nature, 1995, 376, (6540), pp. 498–500 (doi: 10.1038/376498a0).
-
17)
-
14. Wang, J., Higashihara, T.: ‘Synthesis of all-conjugated donor–acceptor block copolymers and their application in all-polymer solar cells’, Polym. Chem., 2013, 4, (22), pp. 5518–5526 (doi: 10.1039/c3py00979c).
-
18)
-
13. Wang, S., Yang, J., Zhang, Z., et al: ‘A new V-shaped triphenylamine/diketopyrrolopyrrole containing donor material for small molecule organic solar cells’, RSC Adv., 2015, 5, (83), pp. 68192–68199 (doi: 10.1039/C5RA07383A).
-
19)
-
18. Wang, S., Yang, Q., Tao, Y., et al: ‘Fully conjugated block copolymers for single-component solar cells: synthesis, purification, and characterization’, New J. Chem., 2016, 40, (2), pp. 1825–1833 (doi: 10.1039/C5NJ02636A).
-
20)
-
19. Wang, S., Liu, Y., Yang, J., et al: ‘Orthogonal solubility in fully conjugated donor–acceptor block copolymers: compatibilizers for polymer/fullerene bulk-heterojunction solar cells’, Chin. J. Polym. Sci., 2017, 35, (2), pp. 207–218.S (doi: 10.1007/s10118-017-1889-6).
-
21)
-
16. Slota, J.E., He, X., Huck, W.T.S.: ‘Controlling nanoscale morphology in polymer photovoltaic devices’, Nano Today, 2010, 5, (3), pp. 231–242 (doi: 10.1016/j.nantod.2010.05.004).
-
22)
-
20. Mulherin, R.C., Jung, S., Huettner, S., et al: ‘Ternary photovoltaic blends incorporating an all-conjugated donor–acceptor diblock copolymer’, Nano Lett., 2011, 11, (11), pp. 4846–4851 (doi: 10.1021/nl202691n).
http://iet.metastore.ingenta.com/content/journals/10.1049/mnl.2019.0002
Related content
content/journals/10.1049/mnl.2019.0002
pub_keyword,iet_inspecKeyword,pub_concept
6
6