Self-peeling-off in the drying of particulate films mixed with cellulose nanofibres

Yuto Ooi; Itsuo Hanasaki; Daiki Mizumura; Yu Matsuda

Self-peeling-off in the drying of particulate films mixed with cellulose nanofibres

View Fulltext

Author(s): Yuto Ooi¹ ; Itsuo Hanasaki¹ ; Daiki Mizumura¹ ; Yu Matsuda²
- Affiliations: 1: Institute of Engineering , Tokyo University of Agriculture and Technology , Naka-cho 2-24-16, Koganei, Tokyo 184-8588 , Japan ;
  2: Institute of Materials and Systems for Sustainability , Nagoya University , Furo-cho, Chikusa, Nagoya, Aichi 464-8603 , Japan
Source: Volume 12, Issue 8, August 2017, p. 511 – 515
DOI: 10.1049/mnl.2017.0100 , Online ISSN 1750-0443

This is an open access article published by the IET under the Creative Commons Attribution-NonCommercial-NoDerivs License (http://creativecommons.org/licenses/by-nc-nd/3.0/)

Received 20/02/2017, Accepted 03/04/2017, Revised 27/03/2017, Published 01/08/2017

Industrial applications of cellulose nanofibres (CNFs) include the additive to a wide range of materials from display and cosmetic to pigment inks. Many of these expected applications are based on the mixture of colloidal particles and CNFs in aqueous dispersion. In particular, the mixed dispersion is typically processed in such a way that the droplet or shallow wide volume of dispersion is dried on the substrate or container. In this work, the basic physical properties that these diverse kinds of potential applications share in common are focused on. The colloidal films were fabricated consisting of polystyrene particles and CNFs under the condition of various concentration combinations through the drying of aqueous dispersion in polystyrene well plates. It has been found that the films fabricated from higher concentrations of CNF tend to peel-off spontaneously in the drying process. The basic mechanism of phenomenon is attributed to the contraction of CNFs during the drying by hydrogen bonding between the filaments.

References

1. 1)
  - 20. Uetani, K., Yano, H.: ‘Semiquantitative structural analysis of highly anisotropic cellulose nanocolloids’, ACS Macro Lett., 2012, 1, pp. 651–655 (doi: 10.1021/mz300109v).
2. 2)
  - 1. Nechyporchuk, O., Belgacem, M.N., Bras, J.: ‘Production of cellulose nanofibers: a review of recent advances’, Ind. Crop. Prod., 2016, 93, pp. 2–25 (doi: 10.1016/j.indcrop.2016.02.016).
3. 3)
  - 10. Sowade, E., Blaudeck, T., Baumann, R.R.: ‘Inkjet printing of colloidal nanospheres: engineering the evaporation-driven self-assembly process to form defined layer morphologies’, Nanoscale Res. Lett., 2015, 10, p. 362 (doi: 10.1186/s11671-015-1065-2).
4. 4)
  - 13. Weon, B.M., Je, J.H.: ‘Fingering inside the coffee ring’, Phys. Rev. E, 2013, 87, p. 013003 (doi: 10.1103/PhysRevE.87.013003).
5. 5)
  - 7. Matsuda, Y., Shibayama, S., Uete, K., et al: ‘Electric conductive pattern element fabricated using commercial inkjet printer for paper-based analytical devices’, Anal. Chem., 2015, 87, pp. 5762–5765 (doi: 10.1021/acs.analchem.5b01568).
6. 6)
  - 5. Jonoobi, M., Harun, J., Mathew, A.P., et al: ‘Mechanical properties of cellulose nanofiber (CNF) reinforced polylactic acid (PLA) prepared by twin screw extrusion’, Compos. Sci. Technol., 2010, 70, pp. 1742–1747 (doi: 10.1016/j.compscitech.2010.07.005).
7. 7)
  - 15. Yunker, P.J., Still, T., Lohr, M.A., et al: ‘Suppression of the coffee-ring effect by shape-dependent capillary interactions’, Nature, 2011, 476, pp. 308–311 (doi: 10.1038/nature10344).
8. 8)
  - 9. Park, J., Moon, J.: ‘Control of colloidal particle deposit patterns within picoliter droplets ejected by ink-jet printing’, Langmuir, 2006, 22, pp. 3506–3513 (doi: 10.1021/la053450j).
9. 9)
  - 4. Jonoobi, M., Mathew, A.P., Oksman, K.: ‘Producing low-cost cellulose nanofiber from sludge as new source of raw materials’, Ind. Crop. Prod., 2012, 40, pp. 232–238 (doi: 10.1016/j.indcrop.2012.03.018).
10. 10)
  - 4. Hoeng, F., Denneulin, A., Bras, J.: ‘Use of nanocellulose in printed electronics: a review’, Nanoscale, 2016, 8, pp. 13131–13154 (doi: 10.1039/C6NR03054H).
11. 11)
  - 5. Peng, Y., Gardner, D.J., Han, Y.: ‘Drying cellulose nanofibrils: in search of a suitable method’, Cellulose, 2012, 19, pp. 91–102 (doi: 10.1007/s10570-011-9630-z).
12. 12)
  - 6. Buchtova, N., Budtova, T.: ‘Cellulose aero-, cryo- and xerogels: towards understanding of morphology control’, Cellulose, 2016, 23, pp. 2585–2595 (doi: 10.1007/s10570-016-0960-8).
13. 13)
  - 5. Marín, Á.G., Gelderblom, H., Lohse, D., et al: ‘Order-to-disorder transition in ring-shaped colloidal stains’, Phys. Rev. Lett., 2011, 107, p. 085502 (doi: 10.1103/PhysRevLett.107.085502).
14. 14)
  - 8. Russo, A., Ahn, B.Y., Adams, J.J., et al: ‘Pen-on-paper flexible electronics’, Adv. Mater., 2011, 23, pp. 3426–3430 (doi: 10.1002/adma.201101328).
15. 15)
  - 17. Hanasaki, I., Shintaku, H., Matsunami, S., et al: ‘Structural and tensile properties of self-assembled DNA network on mica surface’, Comput. Model. Eng. Sci., 2009, 46, pp. 191–207.
16. 16)
  - 3. Koga, H., Nogi, M., Komoda, N., et al: ‘Uniformly connected conductive networks on cellulose nanofiber paper for transparent paper electronics’, NPG Asia Mater., 2014, 6, p. e93 (doi: 10.1038/am.2014.9).
17. 17)
  - 12. Routh, A.F.: ‘Drying of thin colloidal films’, Rep. Prog. Phys., 2013, 76, 046603 (30pp) (doi: 10.1088/0034-4885/76/4/046603).
18. 18)
  - 15. Zhang, L., Nguyen, Y., Chen, W.: ‘‘Coffee ring’ formation dynamics on molecularly smooth substrates with varying receding contact angles’, Coll. Surf. A, 2014, 449, pp. 42–50 (doi: 10.1016/j.colsurfa.2014.02.043).
19. 19)
  - 21. Uetani, K., Yano, H.: ‘Self-organizing capacity of nanocelluloses via droplet evaporation’, Soft Mat., 2013, 9, pp. 3396–3401 (doi: 10.1039/c3sm27822k).
20. 20)
  - 22. Hanasaki, I., Isono, Y., Zheng, B., et al: ‘Adsorption density control of ferritin molecules by multistep alternate coating’, Jpn. J. Appl. Phys., 2011, 50, pp. (065201-1)–(065201-6) (doi: 10.7567/JJAP.50.075102).
21. 21)
  - 3. Nogi, M., Iwamoto, S., Nakagaito, A.N., et al: ‘Optically transparent nanofiber paper’, Adv. Mater., 2009, 21, pp. 1595–1598 (doi: 10.1002/adma.200803174).

Login

Not registered yet?

Share

Tools

Login to add to favourites

Key

Self-peeling-off in the drying of particulate films mixed with cellulose nanofibres

References

Related content