© The Institution of Engineering and Technology
Carbon nanofibres (CNFs) and carbon spheres (CSs) are successfully synthesised using coal particles (<44 micron) in solid phase. Coal and ferrocene as catalyst were fed to the reactor in the solid form. The reaction is carried out in a tubular reactor. The as-synthesised samples have been characterised through Raman spectroscopy, X-ray diffraction, scanning and transmission electron microscopy. The results show CNFs formed in 25–40 nm and mono dispersed CSs in 200–300 nm are amorphous. A feasible mechanism of CNFs and CSs formation from coal described here with the help of coal structure.
References
-
-
1)
-
66. Chen, L., Bia, J., Wang, Ch., et al: ‘One-step solid-state thermolysis of a metal-organic framework: a simple and facile route to large-scale of multi-walled carbon nanotubes’, Chem. Commun., 2008, .
-
2)
-
30. IoanIonescu, M., Zhang, Y., Li, R., et al: ‘Nitrogen-doping effects on the growth, structure and electrical performance of carbon nanotubes obtained by spray pyrolysis method’, Appl. Surf. Sci., 2012, 258, pp. 4563–4568 (doi: 10.1016/j.apsusc.2012.01.028).
-
3)
-
39. Toni, F., Xing, H., Walter, J., et al: ‘Production of well dispersible single walled carbon nanotubes via a ‘floating catalyst’-method’, Chem. Eng. Sci., 2015, 38, pp. 385–395 (doi: 10.1016/j.ces.2015.08.002).
-
4)
-
44. Liu, X., Yang, Y., Ji, W., et al: ‘Controllable growth of nanostructured carbon from coal tar pitch by chemical vapor deposition’, Mater. Chem. Phys., 2007, 104, pp. 320–326 (doi: 10.1016/j.matchemphys.2007.03.020).
-
5)
-
5. Lopata, K., Thorpe, R., Pistinner, Sh., et al: ‘Graphene nanomeshes: onset of conduction band gaps’, Chem. Phys. Lett., 2010, 498, pp. 334–337 (doi: 10.1016/j.cplett.2010.08.086).
-
6)
-
46. Sen, R., Govindaraj, A., Rao, C.N.R.: ‘Carbon nanotubes by the metallocene route’, Chem. Phys. Lett., 1997, 267, pp. 276–280 (doi: 10.1016/S0009-2614(97)00080-8).
-
7)
-
35. Ren, F., Kanaan, S.A., Majewska, M.M., et al: ‘Increase in the yield (and selective synthesis of large-diameter) of single-walled carbon nanotubes through water-assisted ethanol pyrolysis’, J. Catal., 2014, 309, pp. 419–427 (doi: 10.1016/j.jcat.2013.10.007).
-
8)
-
55. Zhu, J., Ji, J., Kwong, F.L., et al: ‘Synthesis of multiwalled carbon nanotubes from bamboo charcoal and the roles of minerals on their growth’, Biomass Bioenergy, 2012, 36, pp. 12–19 (doi: 10.1016/j.biombioe.2011.08.023).
-
9)
-
29. Pinault, M., Mayne-L_Hermite, M., Reynaud, C., et al: ‘Growth of multiwalled carbon nanotubes during the initial stages of aerosol-assisted CCVD’, Carbon, 2005, 43, pp. 2968–2976 (doi: 10.1016/j.carbon.2005.06.011).
-
10)
-
13. Lee, T.Y., Han, J.H., Choi, S.H., et al: ‘Comparison of source gases and catalyst metals for growth of carbon nanotube’, Surf. Coat. Technol., 2003, 169, pp. 348–352 (doi: 10.1016/S0257-8972(03)00108-7).
-
11)
-
16. Lee, Ch.J., Park, J., Yu, J.A.: ‘Catalyst effect on carbon nanotubes synthesized by thermal chemical vapor deposition’, Chem. Phys. Lett., 2002, 360, pp. 250–255 (doi: 10.1016/S0009-2614(02)00831-X).
-
12)
-
42. Zhao, T., Ji, X., Liu, H., et al: ‘Growth of well-aligned carbon nanotubes with different shapes’, Appl. Surf. Sci., 2015, 357, part B, pp. 2136–2140 (doi: 10.1016/j.apsusc.2015.09.197).
-
13)
-
50. Qiu, J., An, Y., Zhao, Z., et al: ‘Catalytic synthesis of single-walled carbon nanotubes from coal gas by chemical vapor deposition method’, Fuel Process. Technol., 2003, 85, pp. 913–920 (doi: 10.1016/j.fuproc.2003.11.033).
-
14)
-
49. Bottes, G.: ‘Pretreatment method for the synthesis of carbon nanotubes and carbon nanostructures from coal and carbon chars’, 2010, .
-
15)
-
64. Zhou, Y., Xiao, N., Qiu, J., et al: ‘Preparation of carbon microfibers from coal liquefaction residue’, Fuel, 2008, 87, pp. 3474–3476 (doi: 10.1016/j.fuel.2008.05.017).
-
16)
-
37. Su, L.F., Wang, J.N., Yu, F., et al: ‘Continuous production of single-wall carbon nanotubes by spray pyrolysis of alcohol with dissolved ferrocene’, Chem. Phys. Lett., 2006, 420, pp. 421–425 (doi: 10.1016/j.cplett.2005.12.046).
-
17)
-
51. Qiu, J., Li, Q., Wang, Zh., et al: ‘CVD synthesis of coal-gas-derived carbon nanotubes and nanocapsules containing magnetic iron carbide and oxide’, Carbon, 2006, 44, pp. 2565–2568 (doi: 10.1016/j.carbon.2006.05.030).
-
18)
-
43. Sankararamakrishnan, N., Chauhan, D., Dwivedi, J.: ‘Synthesis of functionalized carbon nanotubes by floating catalytic chemical vapor deposition method and their sorption behavior toward arsenic’, Chem. Eng. J., 2016, 284, pp. 599–608 (doi: 10.1016/j.cej.2015.08.145).
-
19)
-
36. Khorrami, S.A., Lotfi, R.: ‘Influence of carrier gas flow rate on carbon nanotubes growth by TCVD with Cu catalyst’, J. Saudi Chem. Soc., 2013, .
-
20)
-
32. Ionescu, M.I., Zhang, Y., Li, R., et al: ‘Hydrogen-free spray pyrolysis chemical vapor deposition method for the carbon nanotube growth: parametric studies’, Appl. Surf. Sci., 2001, 257, pp. 6843–6849 (doi: 10.1016/j.apsusc.2011.03.011).
-
21)
-
27. Hsu, C.M., Lin, C.H., Lai, H.J., et al: ‘Root growth of multi-wall carbon nanotubes by MPCVD’, Thin Solid Films, 2005, 471, pp. 140–144 (doi: 10.1016/j.tsf.2004.05.004).
-
22)
-
26. Lin, C.C., Lo, P.Y., Lin, C.H., et al: ‘Structure and property features of the catalyst-assisted carbon nanostructures on Si wafer by catalyst ion implantation and ECR-CVD’, Diam. Relat. Mater., 2004, 14, pp. 778–783 (doi: 10.1016/j.diamond.2004.12.031).
-
23)
-
1. Wang, H., Zhi, L., Liu, K., et al: ‘Thin-sheet carbon nanomesh with an excellent electrocapacitive performance’, Adv. Funct. Mater., 2015, 25, pp. 5406–5414 (doi: 10.1002/adfm.201570226).
-
24)
-
58. Shaikjee, A., Coville, N.J.: ‘The role of the hydrocarbon source on the growth of carbon materials’, Carbon, 2012, 50, pp. 3376–3398 (doi: 10.1016/j.carbon.2012.03.024).
-
25)
-
54. Paul, S., Samdarshi, S.K.: ‘A green precursor for carbon nanotube syntheses’, New Carbon Mater., 2011, 26, pp. 2–6 (doi: 10.1016/S1872-5805(11)60068-1).
-
26)
-
60. Moothi, K., Iyuke, S.E., Meyyappan, M., et al: ‘Coal as a carbon source for carbon nanotube synthesis’, Carbon, 2012, 50, pp. 2679–2690 (doi: 10.1016/j.carbon.2012.02.048).
-
27)
-
69. Gornostayev, S.S., Harkki, J.J., Kerkkonen, O., et al: ‘Carbon spheres in metallurgical coke’, Carbon, 2010, 48, pp. 4197–4214 (doi: 10.1016/j.carbon.2010.07.002).
-
28)
-
62. Qiu, J., Li, Y., Wanga, Y., et al: ‘A novel form of carbon micro-balls from coal’, Carbon, 2003, 41, pp. 767–772 (doi: 10.1016/S0008-6223(02)00392-5).
-
29)
-
7. Pradhan, D., Sharon, M.: ‘Carbon nanotubes, nanofilaments and nanobeads by thermal chemical vapor deposition process’, Mater. Sci. Eng., 2002, B96, pp. 24–28 (doi: 10.1016/S0921-5107(02)00309-4).
-
30)
-
70. Das, T., Saikia, B.K., Baruah, B.P.: ‘Formation of carbon nano-balls and carbon nano-tubes from northeast Indian Tertiary coal: value added products from low grade coal’, Gondwana Res., 2015, 31, pp. 295–304 (doi: 10.1016/j.gr.2015.01.012).
-
31)
-
2. Ning, G., Fan, Zh., Wang, G., et al: ‘Gram-scale synthesis of nanomesh graphene with high surface area and its application in super capacitor electrodes’, Chem. Commun., 2011, 47, pp. 5976–5978 (doi: 10.1039/c1cc11159k).
-
32)
-
18. Emmenegger, C., Bonard, J.M., Mauron, P., et al: ‘Synthesis of carbon nanotubes over Fe catalyst on aluminium and suggested growth mechanisms’, Carbon, 2003, 41, pp. 539–547 (doi: 10.1016/S0008-6223(02)00362-7).
-
33)
-
38. Zhu, J., Jia, J., Kwong, F.l., et al: ‘Synthesis of bamboo-like carbon nanotubes on a copper foil by catalytic chemical vapor deposition from ethanol’, Carbon, 2012, 50, pp. 2504–2512 (doi: 10.1016/j.carbon.2012.01.073).
-
34)
-
52. Xu, X., Huang, Sh.: ‘Carbon dioxide as a carbon source for synthesis of carbon nanotubes by chemical vapor deposition’, Mater. Lett., 2007, 61, pp. 4235–4237 (doi: 10.1016/j.matlet.2007.01.059).
-
35)
-
17. Wright, A.C., Xiong, Y., Maung, N., et al: ‘The influence of the substrate on the growth of carbon nanotubes from nickel clusters – an investigation using STM, FE-SEM, TEM and Raman spectroscopy’, Mater. Sci. Eng. C, 2003, 23, pp. 279–283 (doi: 10.1016/S0928-4931(02)00254-0).
-
36)
-
67. Irfan, M.F., Ashri, W.M., Daud, W.: ‘A study of the charring of Datong coal under nitrogen and carbon dioxide atmospheres with particular reference to nano- particle formation’, .
-
37)
-
68. Xiao, N., Zhou, Y., Qiu, J., et al: ‘Preparation of carbon nanofibers/carbon foam monolithic composite from coal liquefaction residue’, Fuel, 2010, 89, pp. 1169–1171 (doi: 10.1016/j.fuel.2009.10.023).
-
38)
-
53. Moisala, A., Nasibulin, A.G., Brown, D.P., et al: ‘Single-walled carbon nanotube synthesis using ferrocene and iron pentacarbonyl in a laminar flow reactor’, Chem. Eng. Sci., 2006, 61, pp. 4393–4402 (doi: 10.1016/j.ces.2006.02.020).
-
39)
-
14. Cho, W., Schulz, M., Shanov, V.: ‘Growth and characterization of vertically aligned centimeter long CNT arrays’, Carbon, 2014, 72, pp. 264–273 (doi: 10.1016/j.carbon.2014.01.074).
-
40)
-
9. Dai, G.-P., Deng, Sh.: ‘Carbon nanocrosses: synthesis, characterization and growth mechanism of a novel carbon nano-structure’, Chem. Phys. Lett., 2012, 536, pp. 113–117 (doi: 10.1016/j.cplett.2012.03.105).
-
41)
-
23. Su, M., Zheng, B., Liu, J.: ‘Scalable CVD method for the synthesis of single-walled carbon nanotubes with high catalyst productivity’, Chem. Phys. Lett., 2000, 322, pp. 321–326 (doi: 10.1016/S0009-2614(00)00422-X).
-
42)
-
33. Ghosh, P., Soga, T., Ghosh, K., et al: ‘Vertically aligned N-doped carbon nanotubes by spray pyrolysis of turpentine oil and pyridine derivative with dissolved ferrocene’, J. Non-Cryst. Solids, 2008, 354, pp. 4101–4106 (doi: 10.1016/j.jnoncrysol.2008.05.053).
-
43)
-
19. Taniguchi, M., Nagao, H., Hiramatsu, M., et al: ‘Preparation of dense carbon nanotube film using microwave plasma-enhanced chemical vapor deposition’, Diam. Relat. Mater., 2004, 14, pp. 855–858 (doi: 10.1016/j.diamond.2004.10.002).
-
44)
-
4. Jiang, L., Sheng, L., Long, C., et al: ‘Densely packed graphene nanomesh–carbon nano tube hybrid film for ultra-high volumetric performance super capacitors’, Nano Energy, 2015, 11, pp. 471–480 (doi: 10.1016/j.nanoen.2014.11.007).
-
45)
-
21. Jang, M., Eun, K.Y., Baik, Y.J., et al: ‘Effect of NH3 environmental gas on the growth of aligned carbon nanotube in catalystically pyrolizing C2H2’, Thin Solid Films, 2001, 398–399, pp. 150–155 (doi: 10.1016/S0040-6090(01)01442-0).
-
46)
-
57. Yang, Y., Liu, X., Xu, B., et al: ‘Preparation of vapor-grown carbon fibers from deoiled asphalt’, Carbon, 2006, 44, pp. 1661–1664 (doi: 10.1016/j.carbon.2006.01.030).
-
47)
-
10. Mubarak, N.M., Abdullah, E.C., Jayakumar, N.S., et al: ‘An overview on methods for the production of carbon nanotubes’, J. Ind. Eng. Chem., 2013, 20, pp. 1186–1197 (doi: 10.1016/j.jiec.2013.09.001).
-
48)
-
22. Song, I.K., Cho, Y.S., Choi, G.S., et al: ‘The growth mode change in carbon nanotube synthesis in plasma enhanced chemical vapor deposition’, Diam. Relat. Mater., 2004, 13, pp. 1210–1213 (doi: 10.1016/j.diamond.2004.01.006).
-
49)
-
9. Manikandan, D., Mangalaraja, R.V., Avila, R.E., et al: ‘Montmorillonite-carbon nanotube nanofillers by acetylene decomposition using catalytic CVD’, Appl. Clay Sci., 2013, 71, pp. 37–41 (doi: 10.1016/j.clay.2012.10.001).
-
50)
-
25. Lin, C.H., Lee, S.H., Hsu, C.M., et al: ‘Comparisons on properties and growth mechanisms of carbon nanotubes fabricated by high-pressure and low-pressure plasma-enhanced chemical vapor deposition’, Diam. Relat. Mater., 2004, 13, pp. 2147–2151 (doi: 10.1016/j.diamond.2004.06.033).
-
51)
-
48. Joseph Berkmans, A., Jagannatham, M., Priyank, S., et al: ‘Synthesis of branched, nano channeled, ultrafine and nano carbon tubes from PET wastes using the arc discharge method’, Waste Manage., 2014, 34, pp. 2139–2145 (doi: 10.1016/j.wasman.2014.07.004).
-
52)
-
41. Meysami, S.Sh., Koo, A.A., Dillon, F., et al: ‘Aerosol-assisted chemical vapour deposition synthesis of multi-wall carbon nanotubes: II. An analytical study’, Carbon, 2013, 58, pp. 159–169 (doi: 10.1016/j.carbon.2013.02.041).
-
53)
-
47. Bazargan, A., McKay, G.: ‘Synthesis of carbon nanotubes from plastic waste’, Chem. Eng. J., 2012, 195, pp. 377–391 (doi: 10.1016/j.cej.2012.03.077).
-
54)
-
31. Afre, R.A., Soga, T., Jimbo, T., et al: ‘Carbon nanotubes by spray pyrolysis of turpentine oil at different temperatures and their studies’, Microporous Mesoporous Mater., 2006, 96, pp. 184–190 (doi: 10.1016/j.micromeso.2006.06.036).
-
55)
-
56. Huanga, Zh.H., Zhangb, F., Wanga, M.X., et al: ‘Growth of carbon nanotubes on low-cost bamboo charcoal for Pb(II) removal from aqueous solution’, Chem. Eng. J., 2012, 184, pp. 193–197 (doi: 10.1016/j.cej.2012.01.029).
-
56)
-
45. Xiao, N., Zhou, Y., Ling, Zh., et al: ‘Synthesis of a carbon nanofiber/carbon foam composite from coal liquefaction residue for the separation of oil and water’, Carbon, 2013, 59, pp. 530–536 (doi: 10.1016/j.carbon.2013.03.051).
-
57)
-
12. Hoecker, Ch., Smail, F., Bajada, M., et al: ‘Catalyst nanoparticle growth dynamics and their influence on product morphology in a CVD process for continuous carbon nanotube synthesis’, Carbon, 2016, 96, pp. 116–124 (doi: 10.1016/j.carbon.2015.09.050).
-
58)
-
65. Chen, X.W., Timpe, O., Hmid, Sh.B.A., et al: ‘Direct synthesis of carbon nanofibers on modified biomass-derived activated carbon’, Carbon, 2008, 47, pp. 313–347.
-
59)
-
8. Pena, A., Puerta, J., Guerrero, A., et al: ‘Catalytic chemical vapor deposition synthesis of carbon aerogels of high- surface area and porosity’, J. Nanotechnol., 2012, 1, pp. 5–10.
-
60)
-
20. Lee, Ch.J., Park, J., Huh, Y., et al: ‘Temprature effect on the growth of CNT using TCVD’, Chem. Phys. Lett., 2001, 343, pp. 33–38 (doi: 10.1016/S0009-2614(01)00680-7).
-
61)
-
59. Yu, J., Lucas, J., Strezov, V., et al: ‘Coal and carbon nanotube production’, Fuel, 2003, 82, pp. 2025–2032 (doi: 10.1016/S0016-2361(03)00189-3).
-
62)
-
40. Castro, C., Pinault, M., Coste-Leconte, S., et al: ‘Dynamics of catalyst particle formation and multi-walled carbon nanotube growth in aerosol-assisted catalytic chemical vapor deposition’, Carbon, 2010, 48, pp. 3807–3816 (doi: 10.1016/j.carbon.2010.06.045).
-
63)
-
11. Ying, L.S., Salleh, M.A.b.M., Yusoff, H.b.M., et al: ‘Continuous production of carbon nanotubes – a review’, J. Ind. Eng. Chem., 2011, 17, pp. 367–376 (doi: 10.1016/j.jiec.2011.05.007).
-
64)
-
63. Qiu, J., Li, Y., Wang, Y.: ‘Novel fluffy carbon balls obtained from coal which consist of short curly carbon fibres’, Carbon, 2004, 42, pp. 2329–2366 (doi: 10.1016/j.carbon.2004.05.008).
-
65)
-
34. Elguezabal, A.A., Antunez, W., Alonso, G., et al: ‘Study of carbon nanotubes synthesis by spray pyrolysis and model of growth’, Diam. Relat. Mater., 2006, 15, pp. 1329–1335 (doi: 10.1016/j.diamond.2005.10.011).
-
66)
-
28. Wang, W.H., Chao, K.M., Kuo, C.T.: ‘Process and characteristics of the large area well-aligned CNTs with open ends by electron cyclotron resonance chemical vapor deposition’, Diam. Relat. Mater., 2005, 14, pp. 753–757 (doi: 10.1016/j.diamond.2005.01.010).
-
67)
-
3. Akhavana, O., Ghaderic, E., Shirazian, S.A.: ‘Near infrared laser stimulation of human neural stem cells into neurons on graphene nanomesh semiconductors’, Colloids Surf. B, Biointerfaces, 2015, 126, pp. 313–32 (doi: 10.1016/j.colsurfb.2014.12.027).
-
68)
-
24. Liu, G.Y., Zhong, D.Y., Xia, S.H., et al: ‘CNTs grown on the surface of various materials by large volume MP-CVD for VME applications’, Appl. Surf. Sci., 2003, 215, pp. 209–213 (doi: 10.1016/S0169-4332(03)00284-8).
-
69)
-
6. Dhand, V., Prasad, J.S., Rao, M.V., et al: ‘Flame synthesis of carbon nano onions using liquefied petroleum gas without catalyst’, Mater. Sci. Eng. C, 2013, 33, pp. 758–762 (doi: 10.1016/j.msec.2012.10.029).
-
70)
-
61. Greenwood, P.F., Strachan, M.G., El-Nakat, H.J., et al: ‘Laser ablation Fourier transform mass spectrometric investigation of coals and model materials’, Fuel, 1990, 69, pp. 69–75 (doi: 10.1016/0016-2361(90)90185-S).
http://iet.metastore.ingenta.com/content/journals/10.1049/mnl.2016.0089
Related content
content/journals/10.1049/mnl.2016.0089
pub_keyword,iet_inspecKeyword,pub_concept
6
6