Performance improvement of organic solar cells with the introduction of branched zinc oxide nanorods

Fanan Wei; Minlin Jiang; Lei Zhou; Zaili Dong

Performance improvement of organic solar cells with the introduction of branched zinc oxide nanorods

View Fulltext

Author(s): Fanan Wei ^{1, 2} ; Minlin Jiang ³ ; Lei Zhou ^{1, 2} ; Zaili Dong ^{1, 2}
- Affiliations: 1: State Key Laboratory of Robotics, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, People's Republic of China;
  2: University of Chinese Academy of Sciences, Beijing 100049, People's Republic of China;
  3: Department of Electrical and Computer Engineering, University of Pittsburgh, Pittsburgh 15261, USA
Source: Volume 10, Issue 6, June 2015, p. 292 – 295
DOI: 10.1049/mnl.2015.0052 , Online ISSN 1750-0443

Received 08/02/2015, Accepted 01/04/2015, Revised 29/03/2015, Published 23/04/2015

Zinc oxide (ZnO) nanorods with branches are synthesised through facile hydrothermal approach at relatively low temperature. With the prepared ZnO nanostructures as the hole-blocking layer, organic solar cells based on poly(3-hexylthiophene): 1-(3-methoxycarbonyl)propyl-1-phenyl[6,6]C61 are fabricated. For comparison, devices with planar ZnO thin film and bare ZnO nanorods are manufactured as well. J–V curves show that the best device performance is achieved by the branched nanorod-based solar cell. Owing to the decreased charge carrier travelling length, the nanorod-based device shows higher short circuit current (J _sc) than that of the device with planar ZnO layer. Moreover, the solar cell with branched nanorods shows larger open-circuit voltage (V _oc) than that with bare nanorods. Therefore, the performance of organic photovoltaic is enhanced with the introduction of branched ZnO nanorods. Finally, the mechanism of device performance improvement upon the introduction of branched nanorods is discussed.

References

1. 1)
  - 7. Baxter, J.B., Aydil, E.S.: ‘Nanowire-based dye-sensitized solar cells’, Appl. Phys. Lett., 2005, 86, (5), pp. 053114-1–053114-3 (doi: 10.1063/1.1861510).
2. 2)
  - 11. Law, M., Greene, L.E., Johnson, J.C., Saykally, R., Yang, P.: ‘Nanowire dye-sensitized solar cells’, Nature Mater., 2005, 4, pp. 455–459 (doi: 10.1038/nmat1387).
3. 3)
  - 16. Sievers, D.W., Shrotriya, V., Yang, Y.: ‘Modeling optical effects and thickness dependent current in polymer bulk-heterojunction solar cells’, J. Appl. Phys., 2006, 100, (11) p. 114509 (doi: 10.1063/1.2388854).
4. 4)
  - 6. Desai, U.V., Xu, C.K., Wu, J.M., Gao, D.: ‘Solid-state dye-sensitized solar cells based on ordered ZnO nanowire arrays’, Nanotechnology, 2012, 23, (20) p. 205401 (doi: 10.1088/0957-4484/23/20/205401).
5. 5)
  - 4. Wang, J.C., Weng, W.T., Tsai, M.Y., et al: ‘Highly efficient flexible inverted organic solar cells using atomic layer deposited ZnO as electron selective layer’, J. Mater. Chem., 2010, 20, (5), pp. 862–866 (doi: 10.1039/B921396A).
6. 6)
  - 19. Shen, H.H., Bienstman, P., Maes, B.: ‘Plasmonic absorption enhancement in organic solar cells with thin active layers’, J. Appl. Phys., 2009, 106, (7), (doi: 10.1063/1.3243163).
7. 7)
  - 15. Wang, J., Pan, S.L., Chen, M.Y., Dixon, D.A.: ‘Gold nanorod-enhanced light absorption and photoelectrochemical performance of alpha-Fe2O3 thin-film electrode for solar water splitting’, J. Phys. Chem. C, 2013, 117, (42), pp. 22060–22068 (doi: 10.1021/jp406733k).
8. 8)
  - 17. Kumar, P., Kumar, H., Jain, S.C., Venkatesu, P., Chand, S., Kumar, V.: ‘Effect of active layer thickness on open circuit voltage in organic photovoltaic devices’, Jpn. J. Appl. Phys., 2009, 48, (12), (doi: 10.1143/JJAP.48.121501).
9. 9)
  - 12. Huang, J.S., Chou, C.Y., Liu, M.Y., Tsai, K.H., Lin, W.H., Lin, C.F.: ‘Solution-processed vanadium oxide as an anode interlayer for inverted polymer solar cells hybridized with ZnO nanorods’, Org. Electron., 2009, 10, (6), pp. 1060–1065 (doi: 10.1016/j.orgel.2009.05.017).
10. 10)
  - 20. He, Z.C., Zhong, C.M., Su, S.J., Xu, M., Wu, H.B., Cao, Y.: ‘Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure’, Nat. Photonics., 2012, 6, (9), pp. 591–595 (doi: 10.1038/nphoton.2012.190).
11. 11)
  - 11. Ko, S.H., Lee, D., Kang, H.W., et al: ‘Nanoforest of hydrothermally grown hierarchical ZnO nanowires for a high efficiency dye-sensitized solar cell’, Nano. Lett., 2011, 11, (2), pp. 666–671 (doi: 10.1021/nl1037962).
12. 12)
  - 14. Wu, C.T., Liao, W.P., Wu, J.J.: ‘Three-dimensional ZnO nanodendrite/nanoparticle composite solar cells’, J. Mater. Chem., 2011, 21, (9), pp. 2871–2876 (doi: 10.1039/c0jm03481a).
13. 13)
  - 10. Xi, Y., Wu, W.Z., Fang, H., Hu, C.G.: ‘Integrated ZnO nanotube arrays as efficient dye-sensitized solar cells’, J. Alloy Compd., 2012, 529, pp. 163–168 (doi: 10.1016/j.jallcom.2012.02.183).
14. 14)
  - 3. http://www.nrel.gov/, accessed date 2014.
15. 15)
  - 18. Wei, F.N., Liu, L.M., Liu, L.Q., Li, G.Y.: ‘Multiscale modeling and simulation for optimizing polymer bulk heterojunction solar cells’, IEEE J. Photovolt., 2013, 3, (1), pp. 300–309 (doi: 10.1109/JPHOTOV.2012.2216507).
16. 16)
  - L.E. Greene , B.D. Yuhas , M. Law , P. Yang . Solution-grown zinc oxide nanowires. Inorg. Chem. , 7535 - 7543
17. 17)
  - 1. Kaneko, H., Ochiai, Y., Shimizu, K., Hosokawa, Y., Gokon, N., Tamaura, Y.: ‘Thermodynamic study based on the phase diagram of the Na2O-MnO-Fe2O3 system for H-2 production in three-step water splitting with Na2Co3/MnFe2O4/Fe2O3’, Sol. Energy, 2002, 72, (4), pp. 377–383 (doi: 10.1016/S0038-092X(02)00012-9).
18. 18)
  - 5. Xu, C.K., Shin, P., Cao, L.L., Gao, D.: ‘Preferential growth of long ZnO nanowire array and its application in dye-sensitized solar cells’, J. Phys. Chem. C, 2010, 114, (1), pp. 125–129 (doi: 10.1021/jp9085415).
19. 19)
  - 2. You, J.B., Dou, L.T., Yoshimura, K., et al: ‘A polymer tandem solar cell with 10.6% power conversion efficiency’, Nat. Commun., 2013, 4, (doi: 10.1038/ncomms2411).
20. 20)
  - 9. Chen, L.L., Li, X.D., Qu, L.L., et al: ‘Facile and fast one-pot synthesis of ultra-long porous ZnO nanowire arrays for efficient dye-sensitized solar cells’, J. Alloy Compd., 2014, 586, pp. 766–772 (doi: 10.1016/j.jallcom.2013.10.118).

Login

Not registered yet?

Share

Tools

Login to add to favourites

Key

Performance improvement of organic solar cells with the introduction of branched zinc oxide nanorods

References

Related content