© The Institution of Engineering and Technology
A micromachined cantilever-based flow sensor is designed based on differential pressure. Numerical analysis and analogue simulation are used to investigate the FSI (fluid–structure interaction) characteristics of the differential pressure flow sensor. The FSI model is created using the hydromechanics and elastic mechanics, and a systematic theory is established to complete the numerical analysis. Then the working mechanism of the flow sensor is analysed depending on the FSI results. The analogue simulation is undertaken by the commercial software FLUENT and ANSYS. The result of the numerical analysis is similar to that of the analogue simulation. Considering the results of the numerical analysis and the analogue simulation, the shape and size of the flow sensor are optimised. Moreover, the optimised flow sensor is fabricated and calibrated. The calibration results show that the cantilever-based differential pressure flow sensor achieves ideal static characteristics and works well in practical applications.
References
-
-
1)
-
4. van Oudheusden, B.W.: ‘Silicon thermal flow sensors’, Sens. Actuators A, 1992, 30, pp. 5–26 (doi: 10.1016/0924-4247(92)80192-6).
-
2)
-
3. Ashauer, M., Glosch, H., Hedrich, F., Hey, N., Sandmaier, H., Lang, W.: ‘Thermal flow sensor for liquids and gases based on combinations of two principles’, Sens. Actuators A, 1999, 73, pp. 7–13 (doi: 10.1016/S0924-4247(98)00248-9).
-
3)
-
1. Nguyen, N.T.: ‘Micromachined flow sensors – a review’, Flow Meas. Instrum., 1997, 8, (1), pp. 7–16 (doi: 10.1016/S0955-5986(97)00019-8).
-
4)
-
7. Lim, J., Yang, Q.P., Jones, B.E., Jackson, P.R.: ‘DP flow sensor using optical fibre Bragg grating’, Sens. Actuators A, 2001, 92, pp. 102–108 (doi: 10.1016/S0924-4247(01)00546-5).
-
5)
-
13. De Hart, J., Peters, G.W.M., Schreurs, P.J.G., Baaijens, F.P.T.: ‘A three-dimensional computational analysis of fluid–structure interaction in the aortic valve’, J. Biomech., 2003, 36, pp. 103–112 (doi: 10.1016/S0021-9290(02)00244-0).
-
6)
-
10. Takahashi, H., Dung, N.M., Matsumoto, K., Shimoyama, I.: ‘Differential pressure sensor using a piezoresistive cantilever’, J. Micromech. Microeng, 2012, 22, (5), pp. 55015–55020 (doi: 10.1088/0960-1317/22/5/055015).
-
7)
-
9. Shoji, S., Esashi, M.: ‘Microflow devices and systems’, J. Micromech. Microeng, 1994, 4, pp. 157–171 (doi: 10.1088/0960-1317/4/4/001).
-
8)
-
12. Le Tallec, P., Mouro, J.: ‘Fluid structure interaction with large structural displacement’, Comput. Methods Appl. Mech. Eng., 2001, 190, pp. 3039–3067 (doi: 10.1016/S0045-7825(00)00381-9).
-
9)
-
5. van Kuijk, J., Lammerink, T.S.J., de Bree, H.E., Elwenspoek, M., Fluitman, J.H.J.: ‘Multi-parameter detection in fluid flows’, Sens. Actuators A, 1995, 46–47, pp. 369–372 (doi: 10.1016/0924-4247(94)00923-6).
-
10)
-
6. Richter, M., Wackerle, M., Woias, P., Hillerich, B.: ‘A novel flow sensor with high time resolution based on differential pressure principle’. 12th IEEE Int. Conf. on Micro Electro Mechanical Systems, Orlando, FL, USA, 1999, pp. 118–123.
-
11)
-
8. Wei, Z., Qin, M., Huang, Q.: ‘Non-thermal micro flowmeters’, Chin. J. Electron Devices, 2006, 29, (4), pp. 1065–1070.
-
12)
-
11. Chen, P., Zhao, Y., Li, Y.: ‘Design, simulation and fabrication of a micromachined cantilever-based flow sensor’. 8th IEEE Int. Conf. on Nano/Micro Engineered and Molecular Systems (NEMS), Suzhou, China, 2013, pp. 681–684.
-
13)
-
2. Peng, J., Zhou, Z., Ye, X.: ‘Progresses on micromachined flow sensors based on MEMS technologies’, Adv. Mech., 2005, 35, (3), pp. 361–376.
http://iet.metastore.ingenta.com/content/journals/10.1049/mnl.2014.0245
Related content
content/journals/10.1049/mnl.2014.0245
pub_keyword,iet_inspecKeyword,pub_concept
6
6