References

• 1. 1)
     • 14. Bestion, D., Gaviglio, J., Bonnet, J.P.: ‘Comparison between constant current and constant temperature hot wire anemometers in high speed flows’, Rev. Sci. Instrum., 1983, 54, (11), pp. 1513–1524 (doi: 10.1063/1.1137279).
  2. 2)
     • 3. Bao, X., Badescu, M., Bar-Cohen, Y., et al: ‘Sensor for direct measurement of the boundary shear stress in fluid flow’. SPIE Smart Structures and Materials Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics, 2011, pp. 79814G–79814G-8.
  3. 3)
     • 2. Goyne, C.P., Stalker, R.J., Paull, A.: ‘Transducer for direct measurement of skin friction in hypervelocity impulse facilities’, AIAA J., 2002, 40, (1), pp. 42–49 (doi: 10.2514/2.1639).
  4. 4)
     • 17. Senzhi, S.: ‘Fluid measurement technology’ (Beijing University, 1987).
  5. 5)
     • 12. Goldstein, R.J.: ‘Fluid mechanics measurements’ (Taylor & Francis, 1996).
  6. 6)
     • 13. Adamec, R.J., Thiel, D.V., Tanner, P.: ‘Practical hot-wire anemometer excitation modes’, Microelectron. MEMS, and Nanotechnol. Int. Soc. Opt. Photonics, 2004, pp. 239–247.
  7. 7)
     • 9. Xu, Y., Lin, Q., Lin, G., et al: ‘Micromachined thermal shear-stress sensor for underwater applications’, J. Microelectromechan. Syst., 2005, 14, (5), pp. 1023–1030.
  8. 8)
     • 6. Lin, Q., Jiang, F., Wang, X.Q., et al: ‘MEMS thermal shear-stress sensors: experiments, theory and modeling’. Technical Digest of 2000 Solid-State Sensor and Actuator Workshop (Hilton Head 2000), 2000, pp. 304–307.
  9. 9)
     • 5. Tan, Z., Shikida, M., Hirota, M., et al: ‘Experimental and theoretical study of an on-wall in-tube flexible thermal sensor’, J. Micromech. Microeng., 2007, 17, (4), p. 679 (doi: 10.1088/0960-1317/17/4/002).
  10. 10)
      • 10. Liu, C., Huang, J.B., Zhu, Z., et al: ‘A micromachined flow shear-stress sensor based on thermal transfer principles’, J. Microelectromechan. Syst., 1999, 8, (1), pp. 90–99.
  11. 11)
      • 11. Senzhi, S., Yueting, X., Huijing, Y.: ‘Hot Wire/Hot Film Anemometer’, 2003.
  12. 12)
      • 1. Schetz, J.A.: ‘Direct measurement of skin friction in complex flows using movable wall elements’. 24th Aerodynamic Measurement Technology and Ground Testing Conf., Portland, OR, AIAA Paper. 2004, 2112.
  13. 13)
      • 15. Schetz, J.A., Fuhs, A.E., Telionis, D.P.: ‘Handbook of fluid dynamics and fluid machinery’, J. Fluids Eng., 1996, 118, p. 218 (doi: 10.1115/1.2817366).
  14. 14)
      • 4. Lv, H., Jiang, C., Xiang, Z., et al: ‘Design of a micro floating element shear stress sensor’, Flow Meas. Instrum., 2013, 30, pp. 66–74 (doi: 10.1016/j.flowmeasinst.2012.11.004).
  15. 15)
      • 8. Sheplak, M., Chandrasekaran, V., Cain, A.: ‘Characterization of a silicon-micromachined thermal shear-stress sensor’, AIAA J., 2002, 40, (6), pp. 1099–1104 (doi: 10.2514/2.1758).
  16. 16)
      • 7. Sarma, G.R., Moes, T.R.: ‘Demonstration of skin friction measurements featuring in situ estimation of conduction loss using constant voltage anemometers and surface hot-films’, Rev. Sci. Instrum., 2005, 76, (5), pp. 055102 (doi: 10.1063/1.1896621).
  17. 17)
      • 16. Ligeza, P.: ‘A four-point constant-current/temperature controlled circuit for anemometric applications’, Rev. Sci. Instrum., 2000, 71, (1), pp. 109–112 (doi: 10.1063/1.1150170).