© The Institution of Engineering and Technology
This Letter presents the design and implementation of a highly symmetric microelectromechanical system sandwich accelerometer using a double-device-layer silicon-on-insulator (D-SOI) wafer. The proof mass of though-wafer-thickness is suspended by eight L-shaped beams mirror-symmetrically. The suspension system provides flexible mechanical suspension without large chip area consumption. Therefore the accelerometer is immune from trade-off between sensing capacitance and structure flexibility. The sensing mode (first vibration mode) of the accelerometer is successfully decoupled from other variation modes that followed. Thereby, the accelerometer is insensitive to the lateral acceleration and the rotation disturbance. The symmetric beam-mass structure is fabricated from both sides of the D-SOI wafer symmetrically using a combination of anisotropic wet etching and dry etching process. The accelerometer has high opened-loop capacitance sensitivity of 55 pF/±1 g. The closed-loop sensitivity is 1.096 v/g and the cross-axis sensitivity is 0.356%. The resolution of the accelerometer is 4.167 µg/√Hz (0–200 Hz at 1 atm).
References
-
-
1)
-
F. Amini
.
Micro-gravity capacitive silicon-on-insulator accelerometers.
J. Micromech. Microeng.
,
1 ,
2113 -
2120
-
2)
-
E. Peeters ,
S. Vergote ,
B. Puers
.
A highly symmetrical capacitive micro-accelerometer with single degree-of-freedom response.
J. Micromech. Microeng.
,
3
-
3)
-
G. Li ,
Z.H. Li ,
C.S. Wang
.
Design and fabrication of a highly symmetrical capacitive triaxial accelerometer.
J. Micromech. Microeng.
,
1 ,
48 -
54
-
4)
-
Walmsley, R.G., Kiyama, L.K., Milligan, D.M.: `Micro-g silicon accelerometer using surface electrodes', Proc. Int. Conf. on IEEE Sensors, October 2009, Christchurch, New Zealand, p. 925–928.
-
5)
-
X.F. Zhou ,
L.F. Che ,
B. Xiong
.
Single wafer fabrication of a symmetric double-sided beam-mass structure using DRIE and wet etching by a novel vertical sidewall protection technique.
J. Micromech. Microeng.
,
2 ,
109 -
116
-
6)
-
C.H. Liu ,
T.W. Kenny
.
A high-precision, wide-bandwidth micromachined tunneling accelerometer.
J. Microelectromech. Syst.
,
2 ,
425 -
433
-
7)
-
J. Bernstein ,
R. Miller ,
W. Kelley ,
P. Ward
.
Low-noise MEMS vibration sensor for geophysical applications.
J. Microelectromech. Syst.
,
1 ,
433 -
438
-
8)
-
L.M. Roylance ,
J.B. Angell
.
A batch fabricated silicon accelerometer.
IEEE Trans. Electron Devices
,
1911 -
1917
-
9)
-
H. Seidel ,
H. Riedel ,
R. Kolbeck
.
Capacitive silicon accelerometer with highly symmetrical design.
Sens. Actuators A, Phys.
,
1 ,
312 -
315
-
10)
-
Amini, B.V., Abdolvand, R., Ayazi, F.: `Sub-micro-gravity capacitive SOI microaccelerometers', Proc. Int. Conf. on Transducers '05, August 2005, Seoul, Korea, p. 515–518.
-
11)
-
N. Yazdi ,
K. Najafi
.
An all-silicon single-wafer micro-g accelerometer with a combined surface and bulk micromachining process.
J. Microelectromech. Syst.
,
1 ,
544 -
550
-
12)
-
R. Abdolvand ,
B.V. Amini ,
F. Ayazi
.
Sub-micro-gravity in-plane accelerometers with reduced capacitive gaps and extra seismic mass.
J. Microelectromech. Syst.
,
2 ,
1036 -
1043
-
13)
-
R. Puers ,
S. Reyntjens
.
The characterization of a miniature silicon micromachined capacitive accelerometer.
J. Micromech. Microeng.
,
1 ,
127 -
133
-
14)
-
F. Xiao ,
L.F. Che ,
B. Xiong
.
A novel capacitive accelerometer with an eight-beam-mass structure by self-stop anisotropic etching of (100) silicon.
J. Micromech. Microeng.
,
1 ,
1 -
7
http://iet.metastore.ingenta.com/content/journals/10.1049/mnl.2011.0137
Related content
content/journals/10.1049/mnl.2011.0137
pub_keyword,iet_inspecKeyword,pub_concept
6
6