Tool failure is one of the main causes of failure in CNC machine tool machining. The real-time online monitoring technology of CNC machine tool is studied, which is helpful to improve the efficiency of failure-free operation of CNC machine tool and reduce the probability of scrap and equipment failure due to tool failure. Here, the correlation between inverter input current and tool wear condition was studied first, based on which a new method about how to calculate line current on inverter input side was defined, according to definition of current virtual value. Then, a real-time monitoring system for online tool wear is designed and developed. The experimental results show that the system can reflect the tool wear condition and remind to change tool timely.

References

1. 1)
  - 3. Hung, C. W., Lu, M. C.: ‘Model development for tool wear effect on AE signal generation in micromilling’, Int. J. Adv. Manuf. Technol., 2013, 66, (9), pp. 1845–1858.
2. 2)
  - 6. Heinemann, R., Hinduja, S.: ‘A new strategy for tool condition monitoring of small diameter twist drills in deep-hole drilling’, Cond. Monit. Int. J. Mach. Tools Manuf., 2011, 52, (1), pp. 69–76.
3. 3)
  - 8. Alexandre, F.A., Lopes, W.N., Dotto, F.R.L., et al: ‘Tool condition monitoring of aluminum oxide grinding wheel using AE and fuzzy model’, Int. J. Adv. Manuf. Technol., 2018, 96, (1–4), pp. 67–79.
4. 4)
  - 11. Liu, F., Liang, L., Guang-Hua, X.U., et al: ‘Monitoring and diagnosis of machine tool drive system based on motor current signal’, Mod. Mach. Tool Autom. Manuf. Tech., 2011, 5, (5), pp. 64–67.
5. 5)
  - 1. Teti, R., Jemielniak, K., O'Donnell, G., et al: ‘Advanced monitoring of machining operations’, CIRP Annals – Manuf. Technol., 2010, 59, (2), pp. 717–739.
6. 6)
  - 2. Feng, R.H.: ‘Research on tool-wear state monitoring based on digital image’ (Zhejiang Sci-Tech University, Hangzhou, China, 2013), pp. 30–50.
7. 7)
  - 9. Zhou, Y., Sun, N., Yugang, L. I., et al: ‘NC machine tool spindle condition monitoring system based on motor current’, Manuf. Technol. Mach. Tool, 2011, 3, (3), pp. 71–73.
8. 8)
  - 4. Zhu, K., Vogel-Heuser, B.: ‘Sparse representation and its applications in micromilling condition monitoring: noise separation and tool condition monitoring’, Int. J. Adv. Manuf. Technol., 2014, 70, (1–4), pp. 185–199.
9. 9)
  - 5. Roth, J. T., Djurdjanovic, D., Yang, X., et al: ‘Quality and inspection of machining operations: tool condition monitoring’, J. Manuf. Sci. Eng., 2010, 132, (4), pp. 575–590.
10. 10)
  - 10. Luo, Z., Wanqiang, L.U.: ‘Study on failure of tool monitoring based on current signal and vibration signal’, Mach. Tool Hydraul., 2015, 43, (15), pp. 139–141.
11. 11)
  - 12. Summerfield, M., Bai, J.P.: ‘Advanced Qt programming: creating great software with C + + and Qt 4’ (Publishing House of Electronics Industry, Beijing, China, 2011).
12. 12)
  - 7. Sohyung, C., Sultan, B., Shihab, A.: ‘Design of multisensor fusion -based tool condition monitoring system in end milling’, Int. J. Adv. Manuf. Technol., 2009, 46, (5), pp. 681–694.

Design of tool-state monitoring system based on current method

References

Related content