http://iet.metastore.ingenta.com
1887

access icon openaccess Workspace analysis for a five degrees of freedom hybrid engraving plotter

  • XML
    121.5087890625Kb
  • PDF
    2.957033157348633MB
  • HTML
    171.17578125Kb
Loading full text...

Full text loading...

/deliver/fulltext/10.1049/joe.2018.8949/JOE.2018.8949.html;jsessionid=ab989tlh21dok.x-iet-live-01?itemId=%2fcontent%2fjournals%2f10.1049%2fjoe.2018.8949&mimeType=html&fmt=ahah

References

    1. 1)
      • 1. Kumar, V.: ‘Characterization of workspaces of parallel manipulators’, ASME J. Mech, Des., 1992, 114, pp. 368375.
    2. 2)
      • 2. Kumar, V.: ‘Instantaneous kinematics of parallel chain robotic mechanisms’, J. Mech. Des., 1992, 114, pp. 349358.
    3. 3)
      • 3. Liu, X.D., Huang, T.: ‘Workspace analysis and synthesis of 3-TPT parallel manipulator’, China Mech. Eng., 2001, 12, pp. 151153.
    4. 4)
      • 4. Tsai, L.W.: ‘Kinematics of A three-DOF platform with three extensible limbs’. 5th Int. Symp. on Recent Advances in Robot Kinematics, Bernardin Portoroz, Slovenia, 1996, pp. 401410.
    5. 5)
      • 5. Tsai, L.W.: ‘The enumeration of a class of three DOF parallel manipulators’. Tenth World Congress on the Theory of Machine and Mechanisms, Oulu, Finland, 1999, pp. 11211126.
    6. 6)
      • 6. Clavel, : ‘Delta, a fast robot with parallel geometry’. Proc. 18th Int. Symp. on Industrial Robot's, Robots, New York, 1988, pp. 91100..
    7. 7)
      • 7. Nakazawa, M., Isobe, O.: ‘Braking force distribution control for improve vehicle dynamics and brake performance’, Veh. Syst. Dyn., 1995, 24, pp. 413426.
    8. 8)
      • 8. Hu, X.Y.: ‘Research on the simulation of the EBD control system based on the ABS’ (China Agricultural University, Beijing, 2006).
    9. 9)
      • 9. Gao, Y.F., Lu, M.R., Zhou, L.: ‘Analysis of kinematics of a five-axis hybrid manipulator’, J Harbin Inst. Technol., 2014, 46, (7), pp. 17.
    10. 10)
      • 10. Wang, S.S., Mei, Y., Li, R.Q.: ‘Inverse position solution and workspace analysis of a novel 3T2R redundantly actuated hybrid mechanism’, Mech. Drive, 2016, 40, (3), pp. 2328.
    11. 11)
      • 11. Guo, W.J., Li, R.F.: ‘Innovative closed-form solution and workspace analysis for a 5-DOF manipulator’, J. Huazhong Univ. Sci. Technolog. Med. Sci., 2015, 43, pp. 1418.
    12. 12)
      • 12. Liu, Z.Z., Liu, H.Y.: ‘Improvement on monte carlo method for robot workspace determination’, J. Agric. Mach., 2013, 44, (1), pp. 230235.
    13. 13)
      • 13. Xu, Y.H., Liu, D.Z., Fei, R.Y.: ‘Study of the workspace of a 3-PTT parallel micromanipulator’, Mech. Sci. Technol., 2003, 22, (1), pp. 102104. (in Chinese).
    14. 14)
      • 14. Stamper, R.E., Tsai, L.W., Walsh, G.C.: ‘Optimization of a three DOF translational platform for well-conditioned workspace’. Proc. 1997 IEEE Int. Conf. on Robotics and Automation, Albuquerque, New Mexico, April, 1997, pp. 32503255.
    15. 15)
      • 15. Han, X.G.: ‘Study on the theory and the design method of PKMs’ (Beijing Aerospace University, Beijing, 2002).
http://iet.metastore.ingenta.com/content/journals/10.1049/joe.2018.8949
Loading

Related content

content/journals/10.1049/joe.2018.8949
pub_keyword,iet_inspecKeyword,pub_concept
6
6
Loading
This is a required field
Please enter a valid email address