Your browser does not support JavaScript!
http://iet.metastore.ingenta.com
1887

access icon openaccess Research on overvoltage and fault of a UHV AC/DC hybrid system

This is an open access article published by the IET under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0/)
Received 29/08/2018, Accepted 17/10/2018, Revised 15/10/2018, Published 26/10/2018

In view of the overvoltage problem of an ultra-high-voltage DC (UHVDC) AC/DC hybrid system, this study analyses the overvoltage condition under various fault types and gives the identification criterion of the overvoltage form. Firstly, the model of the  ± 800 kV UHVDC and 1000 kV UHV AC hybrid system was established in Simulink. The relevant parameters of current and voltage in the hybrid system were simulated and analysed to verify the accuracy and effectiveness of the model. Secondly, the fault simulation of the two system models of AC and DC, respectively, is carried out, and the theoretical analysis of the internal overvoltage caused by the fault is made. Finally, the simulation of the overvoltage condition of the hybrid system under two conditions is carried out, and the waveforms of the important parameters of the AC system and the DC system are obtained. The waveform of each parameter is analysed and the conclusion is obtained. The type of the overvoltage fault of the UHV AC/DC hybrid system is analysed, which provides the basis for fault type judgement.

Inspec keywords: hybrid power systems; overvoltage protection; HVDC power transmission; overvoltage; power transmission faults; DC-AC power convertors; AC-DC power convertors

Other keywords: fault type judgement; overvoltage condition; overvoltage form identification criterion; UHVDC hybrid system; DC system; UHV AC hybrid system; fault simulation; ultra-high-voltage DC-AC-DC hybrid system; internal overvoltage; AC system; fault types; system models; voltage 1000.0 kV; overvoltage problem; overvoltage fault

Subjects: Power system protection; AC-DC power convertors (rectifiers); DC-AC power convertors (invertors); d.c. transmission

References

    1. 1)
      • 2. Ji, R., Zhou, H., Yi, Q., et al: ‘Research on the characteristics of over-voltage during the closing of UHVAC system’, Electr. Power Syst. Prot. Control, 2011, 39, (14), pp. 86–93.
    2. 2)
      • 7. Lin, L., Zhang, Y., Zhong, Q., et al: ‘Research on commutation failure in multi-infeed HVDC system’, Power Syst. Technol., 2006, 30, (17), pp. 40–46.
    3. 3)
      • 15. Li, X.: ‘High voltage DC transmission system’ (Science Press, Beijing, 2010), pp. 122–124.
    4. 4)
      • 8. Liu, J., Li, X., Wu, C., et al: ‘HVDC system commutation failure of the critical indicators’, Power Syst. Technol., 2009, 33, (8), pp. 8–12.
    5. 5)
      • 16. Ma, Q.: ‘Research on electromagnetic transient process caused by switching operation of UHV series compensation devices’ (North China Electric Power University, Beijing, 2013).
    6. 6)
      • 4. Wang, C., Liu, B.: ‘Multi-regional DC commutation failure on the sending end of the system’, Netw. Technol., 2013, 37, (4), pp. 1052–1057.
    7. 7)
      • 9. He, C., Li, X., Jin, X., et al: ‘HVDC transmission system commutation failure criterion to determine the standard’, Power Grid Technol., 2007, 31, (1), pp. 20–24.
    8. 8)
      • 11. Huang, J., Zhao, C., Sun, Y.: ‘Influence of overvoltage on the transmission capacity of two different HVDC transmission systems’, East China Electr. Power, 2012, 40, (10), pp. 1767–1771.
    9. 9)
      • 14. Wang, D., Deng, X., Zhou, H., et al: ‘ ± 800 kV Xiluodu - DC transient overvoltage in converter station of west zhejiang DC transmission project’, China South. Power Grid Technol., 2012, 6, (2), pp. 6–13.
    10. 10)
      • 10. Ren, K., Li, X., Jin, X., et al: ‘Simulation of commutation failure caused by filter switching in inverter station in multi-infeed HVDC transmission system’, Power Syst. Technol., 2008, 32, (12), pp. 17–22.
    11. 11)
      • 12. Fu, Y., Shen, Y., Ding, J., et al: ‘Overvoltage mechanism and simulation of ± 800 kV UHV DC converter station in chongqing’, Electr. Power Constr., 2013, 34, pp. 48–54.
    12. 12)
      • 6. Wang, X., Yang, Z., Guo, M., et al: ‘Study on the influence of UHVDC access on the stability of east China exchange system’, East China Electr. Power, 2009, 37, (1), pp. 86–90.
    13. 13)
      • 1. Ye, B., Yin, Y., Chen, S.: ‘Ultra-high voltage GIS system no-load long-line closing transient ultra-fast transient voltage’, Kunming Univ. Sci. Technol., 2013, 38, (1), pp. 59–64.
    14. 14)
      • 13. Xiong, H., Li, M.: ‘ ± 800 kV UHV DC transmission system over-voltage analysis’, Yunnan Electr. Power Technol., 2011, 39, (4), pp. 36–39.
    15. 15)
      • 5. Shao, Y., Tang, Y., Guo, X., et al: ‘Flux failure analysis of multi-infeed HVDC system in north China and east China in 2015 UHV planning grid’, Power Syst. Technol., 2011, 35, (10), pp. 9–15.
    16. 16)
      • 3. Sun, Z., Liang, X., Sun, Y.: ‘Simulation of multi-infeed HVDC transmission system based on EMTDC’, Power Syst. Technol., 2006, 30, (S1), pp. 295–298.
http://iet.metastore.ingenta.com/content/journals/10.1049/joe.2018.8792
Loading

Related content

content/journals/10.1049/joe.2018.8792
pub_keyword,iet_inspecKeyword,pub_concept
6
6
Loading
Print this page
This is a required field
Please enter a valid email address