http://iet.metastore.ingenta.com
1887

access icon openaccess Research on transient insulation numerical analysis method of circuit breaker in GIS under lightning impulse voltage

Loading full text...

Full text loading...

/deliver/fulltext/joe/2019/16/JOE.2018.8699.html;jsessionid=4nv2v4hhe8648.x-iet-live-01?itemId=%2fcontent%2fjournals%2f10.1049%2fjoe.2018.8699&mimeType=html&fmt=ahah

References

    1. 1)
      • 1. Jiahong, C., Chun, Z., Shanqiang, G., et al: ‘Present status and development trend of lightning detection and protection technology of power grid in China’, High Volt. Eng., 2016, 42, (11), pp. 33613375.
    2. 2)
      • 2. Shijun, X., Rong, Z., Jianming, L., et al: ‘Simulation on the characteristics and its influence factors of lightning intruding wave in substation’, High Volt. Eng., 2016, 42, (5), pp. 15561564.
    3. 3)
      • 3. Aiqing, M., Xiu, Y., Xinmiao, L., et al: ‘3D electric field calculation and its inverse problem analysis of disk-type insulator in GIS’, High Volt. Eng., 2010, 36, (5), pp. 12171221.
    4. 4)
      • 4. Yunxue, Z., Yu, L., Rongtao, H.: ‘Optimization of insulation structure of 550 kV GIS terminal shield’, Electr. Switchgear, 2016, 54, (5), pp. 4041.
    5. 5)
      • 5. Xiaodan, L., Shuiqing, L., Linchuan, F., et al: ‘Research on the model simplification based on the three-phase GIS electric field analysis’, J. Electr. Eng., 2015, 10, (11), pp. 5862.
    6. 6)
      • 6. Zhang, S., Zhang, X., Wang, H., et al: ‘Forward solver in magnetoacoustic tomography with magnetic induction by generalized finite-element method’, IEEE Trans. Magn., 2016, 52, (3), pp. 14.
    7. 7)
      • 7. Habib, M.A, Khan, M.A.G., Hossain, M.K, et al: ‘Investigation of electric field intensity and degree of uniformity between electrodes under high voltage by charge simulation method’, 17th IEEE Int. Conf. on Computer and Information Technology (ICCIT), Dhaka, Bangladesh, 2014.
    8. 8)
      • 8. Wedaa, H., Abdel-Salam, M., Ahmed, A., et al: ‘Two-dimensional modelling of dielectric barrier discharges using charge simulation technique-theory against experiment’, IET Sci. Meas. Technol., 2014, 8, (5), pp. 285293.
    9. 9)
      • 9. Shams, S., Yazdi, A.G., Movahhedi, M.: ‘Unconditionally stable divergence-free vector-based meshless method for transient electromagnetic analysis’, IEEE Trans. Microw. Theory Tech., 2017, 65, (6), pp. 19291938.
    10. 10)
      • 10. Wang, Q., Shi, Y., Li, M., et al: ‘Analysis of transient electromagnetic scattering using UV method enhanced time-domain integral equations with Laguerre polynomials’, Microw. Opt. Technol. Lett., 2015, 53, (1), pp. 158163.
    11. 11)
      • 11. Li, B., Guo, F., Wang, J., et al: ‘Electromagnetic transient analysis of the saturated iron-core superconductor fault current limiter’, IEEE Trans. Appl. Supercond., 2015, 25, (3), pp. 15.
    12. 12)
      • 12. Barmuta, P, Gibiino, G.P., Ferranti, F, et al: ‘Nonlinear behavioural models of HEMTs using response surface methodology’. Int. Conf. on Numerical Electromagnetic Modeling and Optimization for Rf, Microwave, and Terahertz Applications, Pavia, Italy, 2014.
    13. 13)
      • 13. Saha, S., Chi, G.D., Cho, Y.H.: ‘Optimal rotor shape design of LSPM with efficiency and power factor improvement using response surface methodology’, IEEE Trans. Magn., 2015, 51, (11), pp. 14.
    14. 14)
      • 14. Hongjun, H., Baolin, H., Shengyong, J., et al: ‘Optimization of electro-fenton in the advanced treatment of coal chemical industry wastewater by response surface methodology’, J. Harbin Inst. Technol., 2015, 47, (6), pp. 4549.
    15. 15)
      • 15. Xin, W., Jun, L., Longfei, X., et al: ‘Research on small-radius tube bending process using response surface methodology and finite element analysis’, Ship Eng., 2015, 37, (6), pp. 7579.
    16. 16)
      • 16. Yanjie, Z., Junfei, T., Feilong, D., et al: ‘Optimization design of centrifugal fan inlet collector by response surface methodology’, J. Xi'an Jiaotong Univ., 2015, 49, (11), pp. 4954.
    17. 17)
      • 17. Zheng, L., Lu, Z., Qunjing, W., et al: ‘Optimal design of structure parameters of three-dof deflection type PM motor based on response surface methodology’, Trans. China Electrotech. Soc., 2015, 30, (13), pp. 134142.
    18. 18)
      • 18. Weijiang, C., Hengxin, H., Junjia, H., et al: ‘On the 3-dimentional leader progression model for the lightning shielding failure performance estimation of overhead transmission lines’, Proc. CSEE, 2014, 34, (36), pp. 66016612.
    19. 19)
      • 19. Yunpeng, L., Lei, Z., Jianghai, G., et al: ‘Influence of sand particle size effect on corona discharge characteristics of bundle conductors’, High Volt. Eng., 2015, 41, (9), pp. 30483053.
    20. 20)
      • 20. Shaalan, E.M., Ghania, S.M., Ward, S.A: ‘Analysis of electric field inside HV substations using charge simulation method in three dimensional’. Electrical Insulation and Dielectric Phenomena (CEIDP), West Lafayette, USA, 2010, pp. 15.
    21. 21)
      • 21. Lai, F., Wang, Y., Lu, Y., et al: ‘Improving the accuracy of the charge simulation method for numerical conformal mapping’, Math. Probl. Eng., 2017, 2017, (4), pp. 19.
    22. 22)
      • 22. Wang, D, Lu, T, Li, Q, et al: ‘3-D electric field computation with charge simulation method around buildings near HV transmission lines’. Electromagnetic Field Computation, IEEE, Miami, USA, 2017, pp. 11.
    23. 23)
      • 23. Tamashiro, M.A., Guimaraes, G.C., Rodrigues, A.R., et al: ‘Comparative study of TACS/DBM and MODELS of ATPEMTP applied to power systems computer simulation’, IEEE Latin Am. Trans., 2016, 14, (2), pp. 704712.
    24. 24)
      • 24. Hong, T., Ning, W., Tianxiang, C., et al: ‘Simulation research on improvement of lightning shielding level of long spans of EHV overhead lines by installing surge arresters’, High Volt. Eng., 2015, 41, (1), pp. 6368.
http://iet.metastore.ingenta.com/content/journals/10.1049/joe.2018.8699
Loading

Related content

content/journals/10.1049/joe.2018.8699
pub_keyword,iet_inspecKeyword,pub_concept
6
6
Loading
This is a required field
Please enter a valid email address