http://iet.metastore.ingenta.com
1887

access icon openaccess Development and application of lightning flashover limited equipment for 220 kV AC transmission line

  • XML
    36.95703125Kb
  • HTML
    35.8408203125Kb
  • PDF
    1.5155448913574219MB
Loading full text...

Full text loading...

/deliver/fulltext/10.1049/joe.2018.8357/JOE.2018.8357.html;jsessionid=2nci401qq8ggl.x-iet-live-01?itemId=%2fcontent%2fjournals%2f10.1049%2fjoe.2018.8357&mimeType=html&fmt=ahah

References

    1. 1)
      • 1. Shigemitsu, O., Toshihiro, T., Jun, T.: ‘Analysis of aspects of lightning strokes to large-sized transmission lines’, IEEE Trans. Dielectr. Electr. Insul., 2011, 18, (1), pp. 182191.
    2. 2)
      • 2. Wang, S., Chen, S., Deng, X., et al: ‘Statistical investigation of influence of surge arresters on lightning surge level in 220 V AC power systems’. Asia-Pacific Int. Symp. Electromagnetic Compatibility, Beijing, 2010, pp. 12551258.
    3. 3)
      • 3. Zheng, Z., Yang, Q., Yang, L., et al: ‘Lightning back-flash performance of 220 kV AC quadruple-circuit transmission lines on the same tower’. Asia-Pacific Int. Symp. Electromagnetic Compatibility, Beijing, 2010, pp. 15701573.
    4. 4)
      • 4. Jun, L.I., Zhang, W., Liu, Y.G., et al: ‘Influence factors of lightning performance of back flashover of 220 kV transmission lines with quadruple-circuit on single tower’, Electr. Power Constr., 2010, 31, (9), pp. 5559.
    5. 5)
      • 5. Podporkin, G.V., Pilshikov, V.E., Kalakutsky, E.S., et al: ‘Overhead lines lightning protection by multi-chamber arresters and insulator-arresters’, IEEE Trans. Power Deliv., 2011, 26, (1), pp. 214221.
    6. 6)
      • 6. He, J., Lin, J., Liu, W., et al: ‘Structure-dominated failure of surge arresters by successive impulses’, IEEE Trans. Power Deliv., 2016, 32, (4), pp. 19071914.
    7. 7)
      • 7. IEC 60099-4: ‘Metal-oxide surge arresters without gaps for a.c. Systems’. 2006, https://webstore.iec.ch/publication/735.
    8. 8)
      • 8. IEC 60099-8: ‘Surge arresters –part 8: metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. Systems above 1 kV’. 2011, https://webstore.iec.ch/publication/59532.
    9. 9)
      • 9. IEC 60071-1: ‘Insulation co-ordination-part 1: definitions, principles, and rules’. 2006, https://webstore.iec.ch/publication/578.
    10. 10)
      • 10. IEC 60071-2: ‘Insulation co-ordination-part 2: application guide’. 1996, https://webstore.iec.ch/publication/27072.
    11. 11)
      • 11. IEC 61952: ‘Insulators for overhead lines composite line post insulators for alternative current with a nominal voltage>1000 V’. 2002, https://webstore.iec.ch/publication/6157.
    12. 12)
      • 12. Araujo, M.A.D, Flauzino, R.A., Moro, V.D.C., et al: ‘Modeling and simulation of surge arresters for lightning protection of distribution systems’, IEEE Latin Am. Trans., 2015, 13, (7), pp. 22252231.
    13. 13)
      • 13. He, J., Hu, J., Chen, Y., et al: ‘Minimum distance of lightning protection between insulator string and line surge arrester in parallel’, IEEE Trans. Power Deliv., 2009, 24, (2), pp. 656663.
    14. 14)
      • 14. Zhao, C., Chen, J., Gu, S., et al: ‘Research on differentiated lightning protection comprehensive management for the 500-kV power network in the area near the three gorges project’, IEEE Trans. Power Deliv., 2011, 27, (1), pp. 337352.
    15. 15)
      • 15. Munukutla, K., Vittal, V., Heydt, G.T., et al: ‘A practical evaluation of surge arrester placement for transmission line lightning protection’, IEEE Trans. Power Deliv., 2010, 25, (3), pp. 17421748.
http://iet.metastore.ingenta.com/content/journals/10.1049/joe.2018.8357
Loading

Related content

content/journals/10.1049/joe.2018.8357
pub_keyword,iet_inspecKeyword,pub_concept
6
6
Loading
This is a required field
Please enter a valid email address