This is an open access article published by the IET under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0/)
In this study, the influence of ultrasonic nanocrystalline surface modification (UNSM) technique on the cavitation fatigue properties of AlBC3 alloy was investigated. The fatigue properties of the untreated and treated specimens were assessed using an ultrasonic fatigue testing (UFT) machine. The treated specimens exhibited longer fatigue life in comparison with those of the untreated specimens, which may attributed to the plastically deformed layer at the top surface of the treated specimen. Also, a fracture analysis was studied using a scanning electron microscopy (SEM) to shed light on the fracture behavior of the specimens.
References
-
-
1)
-
4. Arifvianto, B., Mahardika, M.: ‘Effects of surface mechanical attrition treatment (SMAT) on a rough surface of AISI316L stainless steel’, Appl. Surf. Sci., 2012, 258, pp. 4538–4543 (doi: 10.1016/j.apsusc.2012.01.021).
-
2)
-
9. Sun, H., Shi, Y.: ‘An investigation on Hall-Petch relationship in electrodepisted nanocrystalline Cu-Ni-P alloys’, J. Mater. Sci. Technol., 2009, 25, (3), pp. 347–350.
-
3)
-
3. Bandstra, J.P., Koss, D.A.: ‘Modeling the ductile fracture process of void coalescence by void-sheet formation’, Mater. Sci. Eng. A., 2001, 319, pp. 490–500 (doi: 10.1016/S0921-5093(00)02007-4).
-
4)
-
1. Breslin, J.P., Andersen, P.: ‘Hydrodynamics of ship propellers’ (Cambridge University Press, 1994).
-
5)
-
2. Molland, A.F.: ‘The marytime engineering reference book’ (Elsevier, 1994).
-
6)
-
7)
-
8. Amanov, A., Pyun, Y.S, Sasaki, S.: ‘Effect of ultrasonic nanocrystalline surface modification (UNSM) technique on the tribological behavior of sintered Cu-based alloy’, Tribol. Int., 2014, 72, pp. 187–197 (doi: 10.1016/j.triboint.2013.12.003).
-
8)
-
7. Callister, W.D., Rethwisch, D.G.: ‘Materials science and engineering: an introduction’ (Wisley Press, 2014, 9th edn.).
-
9)
-
5. Amanov, A., Cho, I.S., Pyoun, Y.S., Lee, C.S., Park, I.G.: ‘Micro-dimpled surface by ultrasonic nanocrystal surface modification and its tribological effects’, Wear, 2012, 286–287, pp. 136–144 (doi: 10.1016/j.wear.2011.06.001).
http://iet.metastore.ingenta.com/content/journals/10.1049/joe.2015.0069
Related content
content/journals/10.1049/joe.2015.0069
pub_keyword,iet_inspecKeyword,pub_concept
6
6