Your browser does not support JavaScript!
http://iet.metastore.ingenta.com
1887

access icon openaccess Towards good practice guidelines for the contour method of residual stress measurement

Loading full text...

Full text loading...

/deliver/fulltext/joe/2014/8/JOE.2014.0134.html;jsessionid=sp3cd17eoxv7.x-iet-live-01?itemId=%2fcontent%2fjournals%2f10.1049%2fjoe.2014.0134&mimeType=html&fmt=ahah

References

    1. 1)
    2. 2)
      • 49. Boujelbene, M., Bayraktar, E., Tebni, W., Salem, S.B.: ‘Influence of machining parameters on the surface integrity in electrical discharge machining’, Arch. Mater. Sci. Eng., 2009, 37, (2), pp. 110116.
    3. 3)
      • 59. Micro-Epsilon, optoNCDT Laser Triangulation Sensors Catalogue, Retrieved in 2010. Available at http://www.micro-epsilon.co.uk/download/products/cat--optoNCDT--en-us.pdf.
    4. 4)
      • 42. Prime, M.B., Sebring, R.J., Edwards, J.M., Baumann, J.A., Lederich, R.J.: ‘Contour method determination of parent part residual stresses using a partially relaxed FSW test specimen’. SEM X Int. Congress and Exposition on Experimental and Applied Mechanics, Costa Mesa, CA, USA, 2004.
    5. 5)
    6. 6)
      • 37. Flack, D.: ‘CMM measurement strategy. Measurement good practice guide no. 41’ (National Physical Laboratory, Teddington, Middlesex, UK, 2001).
    7. 7)
      • 9. Grant, P.V., Lord, P.D., Whitehead, P.S.: ‘The measurement of residual stresses by the incremental hole drilling technique. Measurement good practice guide 53 – issue 2’ (National Physical Laboratory, Teddington, Middlesex, UK, 2006).
    8. 8)
      • 6. Polycrystalline Materials – Determination of Residual Stresses by Neutron Diffraction (Technology Trends Assessment) (ISO/TTA, 3:2001).
    9. 9)
    10. 10)
    11. 11)
      • 20. Traore, Y., Bouchard, P.J., Francis, J.A., Hosseinzadeh, F.: ‘A novel cutting strategy for reducing plasticity induced errors in residual stress measurements made with the contour method’. Paper presented at the American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Proc.ASME Pressure Vessels and Piping Conf.– Materials and Fabrication, Baltimore, USA, 2011.
    12. 12)
      • 4. Fitzpatrick, M.E., Lodini, A. (Eds.): ‘Analysis of residual stress by diffraction using neutron and synchrotron radiation’ (Taylor & Francis, London, 2003).
    13. 13)
      • 55. Powis, J., Welfare, T.: ‘Private communication’ (Mitutoyo UK Ltd., Hampshire, UK,2010).
    14. 14)
    15. 15)
    16. 16)
    17. 17)
    18. 18)
    19. 19)
      • 14. Pagliaro, P., Prime, M.B., Swenson, H., Zuccarello, B.: ‘Measuring multiple residual-stress components using the contour method and multiple cuts’, ExpMech, 2010, 50, (2), pp. 187194.
    20. 20)
    21. 21)
    22. 22)
    23. 23)
      • 19. Prime, M.B., Kastengren, A.L.: ‘The contour method cutting assumption: error minimization and correction’. Paper presented at the SEM Annual Conf., Indianapolis, IN, 7–10 June 2010.
    24. 24)
      • 1. Withers, P.J., Bhadeshia, K.D.H.: ‘Residual stress. Part 2 – nature and origins’, J. Mater. Sci. Technol., 2001, 17, (4), pp. 367375.
    25. 25)
      • 57. Mitutoyo: Coordinate Measuring Machine Specifications, Crysta-Plus M544/574, 2004.
    26. 26)
      • 7. Webster, G.A., Youtsos, A.G., Ohms, C., Wimpory, R.C.: ‘Draft standard for the measurement of residual stresses by neutron diffraction’, in Gdoutos, E.E. (Ed.): ‘Recent advances in experimental mechanics: In Honor of Isaac M. Daniel.’ (Springer, 2002), pp. 467476.
    27. 27)
      • 5. Fitzpatrick, M.E., Fry, A.T., Holdway, P., Kandil, F.A., Shackleton, J., Suominen, L.: ‘Determination of Residual Stress by X-ray Diffraction-Issue 2. A National Measurement Good Practice Guide, No. 52, 2005.
    28. 28)
    29. 29)
      • 34. Traore, Y.: ‘Controlling plasticity in the contour method of residual stress measurement’. PhD thesis, The Open University, Milton Keynes, 2013.
    30. 30)
      • 18. Bueckner, H.F.: ‘The propagation of cracks and the energy deformation’, Trans. ASME, 1958, 80, pp. 12251230.
    31. 31)
      • 56. Brightman, D.: ‘Private communication’ (QCT, Ltd., Nottingham, UK,2011).
    32. 32)
    33. 33)
      • 36. Flack, D.: ‘CMM probing. Measurement good practice guide no. 43’ (National Physical Laboratory, Teddington, Middlesex, UK, 2001).
    34. 34)
      • 52. Francis, J.A., Kowal, J., Ledgard, P., Hiller, S.: ‘Some effects of EDM cutting variables on the surface condition produced by a contour cut. OU/MatsEng/010, Issue 1’ (The Open University, Milton Keynes, UK, 2011).
    35. 35)
      • 43. Boor, C.: ‘Spline toolbox user's guide’ (The Math Works, Inc., Natick, MA, 2000), p. MATLAB.
    36. 36)
      • 33. Janssen, M., Zuidema, J., Wanhill, R.J.H.: ‘Fracture mechanics’ (Spon Press, Abingdon, UK, 2002, 2nd edn.).
    37. 37)
    38. 38)
    39. 39)
    40. 40)
      • 60. Micro-Epsilon, Confocal Chromatic Measurement System, Retrieved in 2012. Available at http://www.micro-epsilon.co.uk/download/products/cat--confocalDT--en.pdf.
    41. 41)
    42. 42)
    43. 43)
    44. 44)
      • 22. Leach, R.: ‘The measurement of surface texture using stylus instruments. Measurement good practice guide no. 37’ (National Physical Laboratory, Teddington, Middlesex, UK, 2001).
    45. 45)
      • 10. ASTM Standard, E837-08e2: ‘Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method’. ASTM International, West Conshohocken, PA, 2009. doi:10.1520/E0837-08E02.
    46. 46)
    47. 47)
      • 40. Prime, M.B.: ‘Contour method advanced applications: hoop stresses in cylinders and discontinuities’, in Proulx, T. (Ed.): ‘Engineering application of residual stress’ (The Society for Experimental Mechanics, 2011), pp. 1328.
    48. 48)
      • 11. Buttle, D.J., Moorthy, V., Shaw, B.: ‘Determination of residual stresses by magnetic methods. Measurement good practice guide no. 88’ (National Physical Laboratory, Teddington, Middlesex, UK, 2006).
    49. 49)
    50. 50)
    51. 51)
    52. 52)
    53. 53)
    54. 54)
    55. 55)
    56. 56)
    57. 57)
    58. 58)
      • 58. Zeiss: Coordinate Measuring Machine Specifications, Version 2010.12-Bridge Type CMM, ACCURA, Retrieved in 2012. Available at http://209.227.205.117/f/Specifiche%20Accura%20II.pdf.
    59. 59)
    60. 60)
    61. 61)
    62. 62)
    63. 63)
    64. 64)
    65. 65)
    66. 66)
    67. 67)
    68. 68)
    69. 69)
    70. 70)
    71. 71)
    72. 72)
    73. 73)
    74. 74)
    75. 75)
      • 20. Traore, Y., Bouchard, P.J., Francis, J.A., Hosseinzadeh, F.: ‘A novel cutting strategy for reducing plasticity induced errors in residual stress measurements made with the contour method’. Paper presented at the American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Proc. ASME Pressure Vessels and Piping Conf. – Materials and Fabrication, Baltimore, USA, 2011.
    76. 76)
    77. 77)
      • 58. Zeiss: Coordinate Measuring Machine Specifications, Version 2010.12-Bridge Type CMM, ACCURA, Retrieved in 2012. Available at http://209.227.205.117/f/Specifiche%20Accura%20II.pdf.
    78. 78)
      • 31. Reference Manual. GF AgieCharmilles 205 971 120/en/11.10.2007, 2007.
    79. 79)
      • 61. Leica, DCM 3D Profiler, Retrieved in 2012. Available at http://www.micro-epsilon.co.uk/download/products/cat--confocalDT--en.pdf.
    80. 80)
    81. 81)
      • 12. Los Alamos National Laboratory: ‘Upcoming standard test method for determining residual stresses by the incremental slitting methodRetrieved in 2013, Available at http://www.lanl.gov/residual/standard.shtml.
    82. 82)
    83. 83)
    84. 84)
      • 62. British Standard, BS 7789:1995, Guide to Design of Measurement Laboratories, 1995.
    85. 85)
      • 32. Private communication with GF AgieCharmilles, 2012.
    86. 86)
    87. 87)
      • 23. Hosseinzadeh, F., Bouchard, P.J., Kowal, J.: ‘Surface profile measurement for the contour method. OU/MatsEng/019, Issue 1’ (The Open University, Milton Keynes, UK, 2011).
    88. 88)
    89. 89)
      • 38. Cloud, G.: ‘Optical methods of engineering analysis’ (Cambridge University Press, Cambridge, UK, 1998).
    90. 90)
      • 24. Bouchard, P.J., Ledgard, P., Hiller, S., Hosseinzadeh, F.: ‘Making the cut for the contour method’. Paper presented at the 15th Int. Conf. on Experimental Mechanics, Porto, Portugal, 22–27 July 2012.
http://iet.metastore.ingenta.com/content/journals/10.1049/joe.2014.0134
Loading

Related content

content/journals/10.1049/joe.2014.0134
pub_keyword,iet_inspecKeyword,pub_concept
6
6
Loading
This is a required field
Please enter a valid email address