© The Institution of Engineering and Technology
The communication circuit network is widely employed for signal transmission in high-voltage pulse driver system, for commanding, controlling, measurement & communication. The electromagnetic compatibility of the communication circuit network mainly decides the stability and reliability of the high-voltage pulse driver system. Aiming at the electromagnetic interference (EMI) problems of the RS422 communication circuit in the Tesla pulse driver, the generated disturbance sources and characteristics from the Tesla pulse driver itself are analysed in five divided work stages, and two typical simplified EMI coupling modes for the communication circuit are also presented in this Letter. In the RS422 communication cable circuits between the subsystems of the pulse driver, the time-domain resonant characteristics of the communication signal and the conducting disturbances are analysed. The error and failure modes of the RS422 communication data caused by the full time-domain conducting interference are also revealed. Evaluation and calculation method for the time-domain resonant probability and the interference probability of the RS422 communication signals is also put forward. The communication interference probability is also calculated under different repetition work modes of the Tesla pulse driver. In view of the time-domain resonance phenomenon, some effective ways for time-domain resonance elimination and interference compression are put forward.
References
-
-
1)
-
3. Peng, J.C., Su, J.C., Zhang, X.B., et al: ‘Development of 20 GW/100 Hz repetitive pulsed accelerator’, High Power Laser Part. Beams, 2011, 23, pp. 2920–2925.
-
2)
-
6. Zhang, Y., Su, J.C., Zheng, L.: ‘Analysis and elimination on common-mode interferences generated in the series-resonant converter system of high-power tesla pulse driver’, IET Sci. Meas. Technol., 2019, 13, (7), pp. 949–958.
-
3)
-
7. Fan, X.L., Liu, J.L., Lv, X.M.: ‘Research on the electromagnetic fields radiating during the operation of intense electron-beam accelerator’, Laser Part. Beams, 2013, 31, (1), pp. 149–154.
-
4)
-
1. Su, J.C., Zhang, X.B., Liu, G.Z., et al: ‘A long-pulse generator based on tesla transformer and pulse-forming network’, IEEE Trans. Plasma Sci., 2009, 37, (10), pp. 1954–1958.
-
5)
-
4. Peng, J.C., Su, J.C., Song, X.X., et al: ‘Progress on a 40 GW repetitive pulsed accelerator’, High Power Laser Part. Beams, 2010, 22, pp. 712–716.
-
6)
-
9. Siew, W.H.: ‘Radiated interference from a high voltage impulse generator’, IEEE Trans. Electromagn. Compat., 1996, 38, (4), pp. 600–604.
-
7)
-
10. Fan, X.L., Ling, L., Liu, J.L.: ‘Equivalent model of electromagnetic radiation induced by gas-gap switches in intense electron beam accelerator’, High Power Laser Part. Beams, 2013, 25, (4), pp. 1055–1058.
-
8)
-
8. Rokni, S.H., Cossairt, J.D., Liu, J.C.: ‘Radiation shielding at high-energy electron and proton accelerators’. Proc. of the Health physics Society 2008 Professional Development School-Topics in Accelerator Health Physics, Oakland, CA, 2008.
-
9)
-
2. Su, J.C., Zhang, X.B., Li, R., et al: ‘An 8 GW long-pulse generator based on tesla transformer and pulse forming network’, Rev. Sci. Instrum., 2014, 85, (6), p. 063303.
-
10)
-
12. Qiu, Y.F., Liu, J.L., Yang, J.H., et al: ‘Research on the electromagnetic radiation characteristics of the gas main switch of a capacitive intense electron-beam accelerator’, AIP. Adv., 2017, 7, (11), p. 115308.
-
11)
-
5. Mesyats, G.A., Korovin, S.D., Rostov, V.V., et al: ‘The RADAN series of compact pulsed power generators and their applications’, Proc. IEEE, 2004, 92, (7), pp. 1166–1179.
-
12)
-
11. Mayhall, D.J., Yee, J.H.: ‘Computation of broadband, high-power electromagnetic pulse generation from an sir gas avalanche switch’. The 8th IEEE Pulsed Power Conf., San Diego, CA, 1991, pp. 17–19.
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-smt.2019.0498
Related content
content/journals/10.1049/iet-smt.2019.0498
pub_keyword,iet_inspecKeyword,pub_concept
6
6