© The Institution of Engineering and Technology
Measurement and calibration of mass imbalance for rotors are often indispensible as mass imbalance will cause undesired vibration and present serious problems accordingly. In this study, a new method based on digital image processing (DIP) to measure the mass imbalance of a special rotor with air suspension is introduced. By hunting the trace of tilt angle through several identification points on the rotor by DIP, the corresponding oscillating period will be determined, which in turn contributes to the calculation of mass imbalance. Two-dimensional monochrome charge-coupled device (CCD) and peripheral component interconnect (PCI) image board are applied in the experiment to capture the rotor's image, and several user interfaces are developed for image processing and curve fitting as well. Besides, the system error analysis and the comparison of experimental results with that of other related work are provided, which prove the effectiveness and accuracy of this DIP method.
References
-
-
1)
-
15. Henstock, P.V., Chelberg, D.: ‘Automatic gradient threshold determination for edge detection’, IEEE Trans. Image Process., 1996, 5, (5), pp. 784–787 (doi: 10.1109/83.499917).
-
2)
-
9. He, X.X.: ‘Automatic method to measure mass unbalance of spherical rotor’, Chin. J. Mech. Eng., 2004, 40, (2), pp. 50–54 (doi: 10.3901/JME.2004.02.050).
-
3)
-
3. Martynenko, Y.G.: ‘Motion of an unbalanced gyroscope with contactless suspension’, ZV.AN SSSR Mekh. Tverd. Tela, 1974, 9, (4), pp. 13–19.
-
4)
-
11. Nagata, T., Zha, H.: ‘Recognizing and locating a known object from multiple images’, IEEE Trans. Robot. Autom., 1991, 7, (4), pp. 434–448 (doi: 10.1109/70.86075).
-
5)
-
5. Cui, D.P., Yao, Y.X.: ‘Study on the dynamic characteristics of a new type externally pressurized spherical gas bearing with slot-orifice double restrictors’, Tribol. Int., 2010, 43, (4), pp. 822–830 (doi: 10.1016/j.triboint.2009.11.009).
-
6)
-
6. Podgorski, A.: ‘An algorithm for estimation of amplitude and phase of a vibration signal used for determination of rotating mass unbalance’. Proc. IEEE IMTC 2006, 2006, pp. 1425–1429.
-
7)
-
12. Yao, B., Li, F.: ‘Recognizing human-object interactions in still images by modeling the mutual context of objects and human poses’, IEEE Trans. Pattern Anal. Mach. Intell., 2012, 34, (9), pp. 1691–1703 (doi: 10.1109/TPAMI.2012.67).
-
8)
-
4. Walker, F.L.: ‘An automatic mass-unbalance measuring technique’, IEEE Trans. Mil. Electron., 1963, 7, (1), pp. 36–40 (doi: 10.1109/TME.1963.4323039).
-
9)
-
8. Hu, X., Gao, F.: ‘Analysis of mass unbalance torque on a spinning superconducting rotor’, IEEE Trans. Appl. Supercond., 2014, 24, (3) doi: 10.1109/TASC.2013.2283654.
-
10)
-
10. Martynenko, Y.G.: ‘On the theory of a noncontact gyroscope with an unbalanced spherical rotor’, Mech. Solids, 1985, 20, (4), pp. 3–11.
-
11)
-
16. Gao, F., Wang, H.: ‘Mass imbalance measurement of incomplete spherical superconducting rotor with air suspension’, IEEE Trans. Instrum. Meas., 2012, 61, (12), pp. 3318–3323 (doi: 10.1109/TIM.2012.2211473).
-
12)
-
13. John, L., David, H.: ‘A patter on computer organization and Design. The hardware/software interface’ (Morgan Kaufmann Publishers, San Francisco, 1997), pp. 234–265.
-
13)
-
1. Dapeng, C., Yingxue, Y., Dongli, Q.: ‘Static balance method for a special gyroscope rotor with a spherical cavity’, Appl. Mech. Mater., 2009, 16–19, pp. 680–682 (doi: 10.4028/www.scientific.net/AMM.16-19.680).
-
14)
-
14. Yoo, J., Coyle, E.J., Bouman, C.A.: ‘Dual stack filters and the modified difference of estimates approach to edge detection’, IEEE Trans. Image Process., 1997, 6, (12), pp. 1634–1645 (doi: 10.1109/83.650117).
-
15)
-
2. Esval, O.E.: ‘Dynamic balancing of small gyroscope rotors’, Electr. Eng., 1937, 56, pp. 729–734 (doi: 10.1109/EE.1937.6541745).
-
16)
-
7. Zhang, S.: ‘Research on the mass unbalance response of an inner planetary gear reducer’. Int. Conf. Mechatronics and Automation, 2009, pp. 3415–3419.
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-smt.2013.0229
Related content
content/journals/10.1049/iet-smt.2013.0229
pub_keyword,iet_inspecKeyword,pub_concept
6
6