Your browser does not support JavaScript!
http://iet.metastore.ingenta.com
1887

access icon free Review of recent advancements of direct torque control in induction motor drives – a decade of progress

© The Institution of Engineering and Technology
Received 09/05/2017, Accepted 31/08/2017, Revised 03/08/2017, Published 04/09/2017

Since the invention of direct torque control (DTC) in later 1980s for alternating current (AC) motor drives, it has undergone many modifications to improve the control strategy. This study provides a comprehensive review of recent advancements of DTC of induction motor (IM) for the past one decade. Strategies adopted to improve the performance of DTC based on switching table, constant switching frequency operation, intelligent control, sensorless control and predictive control are extensively discussed with its key results and algorithms.

Inspec keywords: intelligent control; sensorless machine control; induction motor drives; predictive control; torque control

Other keywords: DTC; alternating current motor drives; AC motor drives; direct torque control; predictive control; IM; switching table; intelligent control; constant switching frequency operation; induction motor drives; sensorless control

Subjects: Asynchronous machines; Neurocontrol; Drives; Fuzzy control; Mechanical variables control; Optimal control; Control of electric power systems

References

    1. 1)
      • 62. Gdaim, S., Mtibaa, A., Mimouni, M.F.: ‘Design and experimental implementation of DTC of an induction machine based on fuzzy logic control on FPGA’, IEEE Trans. Fuzzy Syst., 2015, 23, (3), pp. 644–655.
    2. 2)
      • 71. Holtz, J., Quan, J.: ‘Sensorless vector control of induction motors at very low speed using a nonlinear inverter model and parameter identification’, IEEE Trans. Ind. Appl., 2002, 38, (4), pp. 1087–1095.
    3. 3)
      • 83. Lascu, C., Blaabjerg, F.: ‘Super-twisting sliding mode direct torque control of induction machine drives’. 2014 IEEE Energy Conversion Congress and Exposition (ECCE), Pittsburgh, PA, 2014, pp. 5116–5122.
    4. 4)
      • 67. Riad, T., Hocine, B., Salima, M.: ‘New direct torque neuro-fuzzy control based SVM-three level inverter-fed induction motor’, Int. J. Control Autom. Syst., 2010, 8, (2), pp. 425–432.
    5. 5)
      • 114. Messaïf, I., Berkouk, E.-M., Saadia, N.: ‘A study of DTC-power electronic cascade fed by photovoltaic cell-three-level NPC inverter’, Smart Grid Renew. Energy, 2010, 1, pp. 109–118.
    6. 6)
      • 118. Liu, S.-X., Wang, M.-Y., Chen, Y.-G., et al: ‘A novel fuzzy direct torque control system for three-level inverter-fed induction machine’, Int. J. Autom. Comput., 2010, 7, (1), pp. 78–85.
    7. 7)
      • 78. Hajian, M., Soltani, J., Markadeh, G.A., et al: ‘Adaptive nonlinear direct torque control of sensorless IM drives with efficiency optimisation’, IEEE Trans. Ind. Electron., 2010, 57, (3), pp. 975–985.
    8. 8)
      • 37. Jidin, A., Idris, N.R.N., Yatim, A.H.M., et al: ‘Simple dynamic overmodulation strategy for fast torque control in DTC of induction machines with constant-switching-frequency controller’, IEEE Trans. Ind. Appl., 2011, 47, (5), pp. 2283–2291.
    9. 9)
      • 77. Xepapas, S., Kaletsanos, A., Xepapas, F., et al: ‘Sliding-mode observer for speed-sensorless induction motor drives’, IEE Proc.-Control Theory Appl., 2003, 150, (6), pp. 611–617.
    10. 10)
      • 51. Khoucha, F., Lagoun, S.M., Marouani, K., et al: ‘Hybrid cascaded H-bridge multilevel-inverter induction-motor-drive direct torque control for automotive applications’, IEEE Trans. Ind. Electron., 2010, 57, (3), pp. 892–899.
    11. 11)
      • 39. Abdelli, R., Rekioua, D., Rekioua, T.: ‘Performances improvements and torque ripple minimisation for VSI fed induction machine with direct control torque’, ISA Trans., 2011, 50, pp. 213–219.
    12. 12)
      • 19. Casadei, D., Serra, G., Tani, A.: ‘The use of matrix converters in direct torque control of induction machines’, IEEE Trans. Ind. Electron., 2001, 48, (6), pp. 1057–1064.
    13. 13)
      • 105. Ouhrouche, M., Errouissi, R., Trzynadlowski, A.M., et al: ‘A novel predictive direct torque controller for induction motor drives’, IEEE Trans. Ind. Electron., 2016, 63, (8), pp. 5221–5230.
    14. 14)
      • 14. Hu, J., Wu, B.: ‘New integration algorithms for estimating motor flux over a wide speed range’, IEEE Trans. Power Electron., 1998, 13, (5), pp. 969–977.
    15. 15)
      • 49. Rodríguez, J., Pontt, J., Kouro, S., et al: ‘Direct torque control with imposed switching frequency in an 11-level cascaded inverter’, IEEE Trans. Ind. Electron., 2004, 51, (4), pp. 827–833.
    16. 16)
      • 4. Buja, G.S., Kazmierkowski, M.P.: ‘Direct torque control of PWM inverter-fed AC motors – a survey’, IEEE Trans. Ind. Electron., 2004, 51, (4), pp. 744–757.
    17. 17)
      • 121. Payami, S., Behera, R.K.: ‘An improved DTC technique for low-speed operation of a five-phase induction motor’, IEEE Trans. Ind. Electron., 2017, 64, (5), pp. 3513–3523.
    18. 18)
      • 96. Lee, K.-B., Blaabjerg, F.: ‘Sensorless DTC-SVM for induction motor driven by a matrix converter using a parameter estimation strategy’, IEEE Trans. Ind. Electron., 2008, 55, (2), pp. 512–521.
    19. 19)
      • 123. Payami, S., Behera, R.K., Iqbal, A.: ‘DTC of three-level NPC inverter fed five-phase induction motor drive with novel neutral point voltage balancing scheme’, IEEE Trans. Power Electron., 2017, PP, (99), pp. 1–1.
    20. 20)
      • 36. Idris, N.R.N., Toh, C.L., Elbuluk, M.E.: ‘A new torque and flux controller for direct torque control of induction machines’, IEEE Trans. Ind. Appl., 2006, 42, (6), pp. 1358–1366.
    21. 21)
      • 40. Kumsuwan, Y., Premrudeepreechacharn, S., Toliyat, H.A.: ‘Modified direct torque control method for induction motor drives based on amplitude and angle control of stator flux’, Electr. Power Syst. Res., 2008, 78, pp. 1712–1718.
    22. 22)
      • 11. Nash, J.N.: ‘Direct torque control, induction motor vector control without an encoder’, IEEE Trans. Ind. Appl., 1997, 33, (2), pp. 333–341.
    23. 23)
      • 53. Lai, Y.-S., Lin, J.-C.: ‘New hybrid fuzzy controller for direct torque control induction motor drives’, IEEE Trans. Power Electron., 2003, 18, (5), pp. 1211–1219.
    24. 24)
      • 15. Kang, J.-K., Sul, S.-K.: ‘New direct torque control of induction motor for minimum torque ripple and constant switching frequency’, IEEE Trans. Ind. Appl., 1999, 35, (5), pp. 1076–1082.
    25. 25)
      • 29. Cirrincione, M., Pucci, M., Vitale, G., et al: ‘A new direct torque control strategy for the minimisation of common-mode emissions’, IEEE Trans. Ind. Appl., 2006, 42, (2), pp. 504–517.
    26. 26)
      • 68. Hafeez, M., Uddin, M.N., Rahim, N.A., et al: ‘Self-tuned NFC and adaptive torque hysteresis-based DTC scheme for IM drive’, IEEE Trans. Ind. Appl., 2014, 50, (2), pp. 1410–1420.
    27. 27)
      • 100. Metidji, B., Taib, N., Baghli, L., et al: ‘Low-cost direct torque control algorithm for induction motor without AC phase current sensors’, IEEE Trans. Power Electron., 2012, 27, (9), pp. 4132–4139.
    28. 28)
      • 80. Orlowska-Kowalska, T., Tarchala, G., Dybkowski, M.: ‘Sliding-mode direct torque control and sliding-mode observer with a magnetizing reactance estimator for the field-weakening of the induction motor drive’, Math. Comput. Simul., 2014, 98, pp. 31–45.
    29. 29)
      • 31. Lokriti, A., Salhi, I., Doubabi, S.: ‘IM direct torque control with no flux distortion and no static torque error’, ISA Trans., 2015, 59, pp. 256–267.
    30. 30)
      • 7. Habetler, T.G., Divan, D.M.: ‘Control strategies for direct torque control using discrete pulse modulation’, IEEE Trans. Ind. Appl., 1991, 21, (5), pp. 893–901.
    31. 31)
      • 12. Mir, S., Elbuluk, M.E., Zinger, D.S.: ‘PI and fuzzy estimators for tuning the stator resistance in direct torque control of induction machines’, IEEE Trans. Power Electron., 1998, 13, (2), pp. 279–287.
    32. 32)
      • 88. Wang, Y., Tobayashi, S., Lorenz, R.D.: ‘A low-switching-frequency flux observer and torque model of deadbeat-direct torque and flux control on induction machine drives’, IEEE Trans. Ind. Appl., 2015, 51, (3), pp. 2255–2267.
    33. 33)
      • 26. Casadei, D., Serra, G., Stefani, A., et al: ‘DTC drives for wide speed range applications using a robust flux-weakening algorithm’, IEEE Trans. Ind. Electron., 2007, 54, (5), pp. 2451–2461.
    34. 34)
      • 99. Wang, W., Cheng, M., Wang, Z., et al: ‘Fast switching direct torque control using a single DC-link current sensor’, J. Power Electron., 2012, 12, (6), pp. 895–903.
    35. 35)
      • 106. Habibullah, M., Lu, D.D.C., Xiao, D., et al: ‘A simplified finite-state predictive direct torque control for induction motor drive’, IEEE Trans. Ind. Electron., 2016, 63, (6), pp. 3964–3975.
    36. 36)
      • 76. Lascu, C., Andreescu, G.-D.: ‘Sliding-mode observer and improved integrator with DC-offset compensation for flux estimation in sensorless-controlled induction motors’, IEEE Trans. Ind. Electron., 2006, 53, (3), pp. 785–794.
    37. 37)
      • 13. Purcell, A., Acstrnley, P.: ‘Multilevel hysteresis comparator forms for direct torque control schemes’, Electron. Lett., 1998, 34, (6), pp. 601–603.
    38. 38)
      • 109. Lee, H.-H., Nguyen, H.M., Chun, T.-W.: ‘Implementation of direct torque control method using matrix converter fed induction motor’, J. Power Electron., 2008, 8, (1), pp. 74–80.
    39. 39)
      • 85. Barut, M., Bogosyan, S., Gokasan, M.: ‘Speed-sensorless estimation for induction motors using extended Kalman filters’, IEEE Trans. Ind. Electron., 2007, 54, (1), pp. 272–280.
    40. 40)
      • 6. Shyu, K.-K., Shang, L.-J., Chen, H.-Z., et al: ‘Flux compensated direct torque control of induction motor drives for low speed operation’, IEEE Trans. Power Electron., 2004, 19, (6), pp. 1608–1613.
    41. 41)
      • 119. Naik, N.V., Panda, A., Singh, S.P.: ‘A three-level fuzzy-2 DTC of induction motor drive using SVPWM’, IEEE Trans. Ind. Electron., 2016, 63, (3), pp. 1467–1479.
    42. 42)
      • 3. Depenbrock, M.: ‘Direct self-control (DSC) of inverter-fed induction machine’, IEEE Trans. Power Electron., 1988, 3, (4), pp. 420–429.
    43. 43)
      • 28. Jidin, A., Idris, N.R.N., Yatim, A.H.M., et al: ‘A hybrid DTC–DSC drive for high performance induction motor control’, J. Power Electron., 2011, 11, (5), pp. 704–712.
    44. 44)
      • 66. Areed, F.G., Haikal, A.Y., Mohammed, R.H.: ‘Adaptive neuro-fuzzy control of an induction motor’, Ain Shams Eng. J., 2010, 1, pp. 71–78.
    45. 45)
      • 42. Huangang, W., Wenli, X., Geng, Y., et al: ‘Variable-structure torque control of induction motors using space vector modulation’, Electr. Eng., 2005, 87, pp. 93–102.
    46. 46)
      • 111. Metidji, B., Tazrart, F., Azib, A., et al: ‘A new fuzzy direct torque control strategy for induction machine based on indirect matrix converter’, Int. J. Res. Rev. Comput. Eng., 2011, 1, (1), pp. 18–22.
    47. 47)
      • 45. Patil, U.V., Suryawanshi, H.M., Renge, M.M.: ‘Closed-loop hybrid direct torque control for medium voltage induction motor drive for performance improvement’, IET Power Electron., 2014, 7, (1), pp. 31–40.
    48. 48)
      • 22. Escalante, M.F., Vannier, J.C., Arzande, A.: ‘Flying capacitor multilevel inverters and DTC motor drive applications’, IEEE Trans. Ind. Electron., 2002, 49, (4), pp. 809–815.
    49. 49)
      • 10. Griva, G., Habetler, T.G., Profumo, F., et al: ‘Performance evaluation of a direct torque controlled drive in the continuous PWM-square wave transition region’, IEEE Trans. Power Electron., 1995, 10, (4), pp. 464–471.
    50. 50)
      • 27. Krim, S., Gdaim, S., Mtibaa, A., et al: ‘FPGA-based implementation direct torque control of induction motor’, Int. J. Power Electron. Drive Syst. (IJPEDS), 2015, 5, (3), pp. 293–304.
    51. 51)
      • 54. Douiri, M.R., Cherkaoui, M.: ‘Comparative study of various artificial intelligence approaches applied to direct torque control of induction motor drives’, Front Energy, 2013, 7, (4), pp. 456–467.
    52. 52)
      • 86. Zhang, J., Kang, L., Chen, L., et al: ‘Direct torque control of sensorless induction machine drives: a two-stage Kalman filter approach’, Math. Probl. Eng., 2015, 2015, pp. 1–17.
    53. 53)
      • 112. Ahmadi, M.Z.R.Z., Jidin, A., Azri, M., et al: ‘Improved torque control performance in direct torque control using optimal switching vectors’, Int. J. Power Electron. Drive Syst. (IJPEDS), 2015, 5, (3), pp. 441–452.
    54. 54)
      • 64. Aktas, M., Okumus, H.I.: ‘Stator resistance estimation using ANN in DTC IM drives’, Turk. J. Electr. Eng. Comput. Sci., 2010, 18, (2), pp. 197–210.
    55. 55)
      • 103. Vasudevan, M., Arumugam, R., Paramasivam, S.: ‘Development of torque and flux ripple minimisation algorithm for direct torque control of induction motor drive’, Electr. Eng., 2006, 89, pp. 41–51.
    56. 56)
      • 59. Rashag, H.F., Koh, S.P., Abdalla, A.N., et al: ‘Modified direct torque control using algorithm control of stator flux estimation and space vector modulation based on fuzzy logic control for achieving high performance from induction motors’, J. Power Electron., 2013, 13, (3), pp. 369–380.
    57. 57)
      • 92. Cirrincione, M., Pucci, M.: ‘Sensorless direct torque control of an induction motor by a TLS-based MRAS observer with adaptive integration’, Automatica, 2005, 41, pp. 1843–1854.
    58. 58)
      • 50. Kouro, S., Bernal, R., Miranda, H., et al: ‘High-Performance torque and flux control for multilevel inverter fed induction motors’, IEEE Trans. Power Electron., 2007, 22, (6), pp. 2116–2123.
    59. 59)
      • 24. Boldea, I., Nasar, S.A.: ‘Torque vector control (TVC)-A class of fast and robust torque-speed and position digital controllers for electric drives’, Electr. Mach. Power Syst., 1988, 15, (3), pp. 135–147.
    60. 60)
      • 58. Nasir Uddin, M., Hafeez, M.: ‘FLC-based DTC scheme to improve the dynamic performance of an IM drive’, IEEE Trans. Ind. Appl., 2012, 48, (2), pp. 823–831.
    61. 61)
      • 87. Zhang, Z., Tang, R., Bai, B., et al: ‘Novel direct torque control based on space vector modulation with adaptive stator flux observer for induction motors’, IEEE Trans. Magn., 2010, 46, (8), pp. 3133–3136.
    62. 62)
      • 69. Singh, B., Jain, S., Dwivedi, S.: ‘Torque ripple reduction technique with improved flux response for a direct torque control induction motor drive’, IET Power Electron., 2013, 6, (2), pp. 326–342.
    63. 63)
      • 116. Islam, D.Md., Reza, C.M.F.S., Mekhilef, S.: ‘Modeling and experimental validation of 5-level hybrid H-bridge multilevel inverter fed DTC-IM drive’, J. Electr. Eng. Technol., 2015, 10, (2), pp. 574–585.
    64. 64)
      • 90. Xu, Z., Rahman, M.F.: ‘Comparison of a sliding observer and a Kalman filter for direct-torque-controlled IPM synchronous motor drives’, IEEE Trans. Ind. Electron., 2012, 59, (11), pp. 4179–4188.
    65. 65)
      • 48. Rosic, M.M., Bebic, M.Z.: ‘Analysis of torque ripple reduction in induction motor DTC drive with multiple voltage vectors’, Adv. Electr. Comput. Eng., 2015, 15, (1), pp. 105–114.
    66. 66)
      • 120. Usta, M.A., Okumus, H.I., Kahveci, H.: ‘A simplified three-level SVM-DTC induction motor drive with speed and stator resistance estimation based on extended Kalman filter’, Electr. Eng., 2017, 99, pp. 707–720.
    67. 67)
      • 75. Lascu, C., Boldea, I., Blaabjerg, F.: ‘Variable-structure direct torque control – a class of fast and robust controllers for induction machine drives’, IEEE Trans. Ind. Electron., 2004, 51, (4), pp. 785–792.
    68. 68)
      • 72. Holtz, J., Jiang, J., Pan, H.: ‘Identification of rotor position and speed of standard induction motors at low speed including zero stator frequency’. 23rd Int. Conf. on Industrial Electronics, Control and Instrumentation, 1997, IECON 97, New Orleans, LA, 1997, vol. 2, pp. 971–976.
    69. 69)
      • 47. Zaid, S.A., Mahgoub, O.A., El-Metwally, K.A.: ‘Implementation of a new fast direct torque control algorithm for induction motor drives’, IET Electr. Power Appl., 2010, 4, (5), pp. 305–313.
    70. 70)
      • 60. Zidani, F., Diallo, D., Benbouzid, M.E.H., et al: ‘Direct torque control of induction motor with fuzzy stator resistance adaptation’, IEEE Trans. Energy Convers., 2006, 21, (2), pp. 619–621.
    71. 71)
      • 56. Romeral, L., Arias, A., Aldabas, E., et al: ‘Novel direct torque control (DTC) scheme with fuzzy adaptive torque-ripple reduction’, IEEE Trans. Ind. Electron., 2003, 50, (3), pp. 487–492.
    72. 72)
      • 17. Casadei, D., Serra, G., Tani, A.: ‘Implementation of a direct torque control algorithm for induction motors based on discrete space vector modulation’, IEEE Trans. Power Electron., 2000, 15, (4), pp. 769–777.
    73. 73)
      • 104. Beerten, J., Verveckken, J., Driesen, J.: ‘Predictive direct torque control for flux and torque ripple reduction’, IEEE Trans. Ind. Electron., 2010, 57, (1), pp. 404–412.
    74. 74)
      • 117. Kosmodamianskii, A.S., Vorob'ev, V.I., Pugachev, A.A.: ‘Direct torque control of induction motors fed by a single frequency converter’, Russ. Electr. Eng., 2015, 86, (9), pp. 527–533.
    75. 75)
      • 57. Singh, B., Jain, S., Dwivedi, S.: ‘Enhancement in steady state and dynamic performance of direct torque control induction motor drive’, J. Electr. Eng., 2013, 64, (5), pp. 283–290.
    76. 76)
      • 70. Lascu, C., Boldea, I., Blaabjerg, F.: ‘Very-low-speed variable-structure control of sensorless induction machine drives without signal injection’, IEEE Trans. Ind. Appl., 2005, 41, (2), pp. 591–598.
    77. 77)
      • 84. Beguenane, R., Ouhrouche, M.A., Trzynadlowski, A.M.: ‘A new scheme for sensorless induction motor control drives operating in low speed region’, Math. Comput. Simul., 2006, 71, pp. 109–120.
    78. 78)
      • 25. Kaboli, S., Zolghadri, M.R., Vahdati-Khajeh, E.: ‘A fast flux search controller for DTC-based induction motor drives’, IEEE Trans. Ind. Electron., 2007, 54, (5), pp. 2407–2416.
    79. 79)
      • 97. Zhang, Y., Zhu, J., Zhao, Z., et al: ‘An improved direct torque control for three-level inverter-fed induction motor sensorless drive’, IEEE Trans. Power Electron., 2012, 27, (3), pp. 1502–1513.
    80. 80)
      • 91. Wang, S.Y., Tseng, C.L., Yeh, C.C.: ‘Adaptive supervisory Gaussian-cerebellar model articulation controller for direct torque control induction motor drive’, IET Electr. Power Appl., 2011, 5, (3), pp. 295–306.
    81. 81)
      • 38. Jidin, A.B., Idris, N.R.B.N, Yatim, A.H.B.M., et al: ‘A wide-speed high torque capability utilizing overmodulation strategy in DTC of induction machines with constant switching frequency controller’, IEEE Trans. Power Electron., 2012, 27, (5), pp. 2566–2575.
    82. 82)
      • 8. Habetler, T.G., Profumo, F., Pastorelli, M., et al: ‘Direct torque control of induction machines using space vector modulation’, IEEE Trans. Ind. Appl., 1992, 28, (5), pp. 1045–1053.
    83. 83)
      • 30. Vaez-Zadeh, S., Jalali, E.: ‘Combined vector control and direct torque control method for high performance induction motor drives’, Energy Convers. Manage., 2007, 48, pp. 3095–3101.
    84. 84)
      • 9. Orille, A.L., Sowilam, G.M.A.: ‘Application of neural networks for direct torque control’. Proc. of the 24th Int. Conf. on Computers & Industrial Engineering, 1999, vol. 37, pp. 391–394.
    85. 85)
      • 52. Khoucha, F., Lagoun, M.S., Kheloui, A., et al: ‘A comparison of symmetrical and asymmetrical three-phase h-bridge multilevel inverter for DTC induction motor drives’, IEEE Trans. Energy Convers., 2011, 26, (1), pp. 64–72.
    86. 86)
      • 101. Bertoluzzo, M., Buja, G., Menis, R.: ‘Direct torque control of an induction motor using a single current sensor’, IEEE Trans. Ind. Electron., 2006, 53, (3), pp. 778–784.
    87. 87)
      • 89. Alsofyani, I.M., Idris, N.R.N.: ‘Lookup-table-based DTC of induction machines with improved flux regulation and extended Kalman filter state estimator at low-speed operation’, IEEE Trans. Ind. Inf., 2016, 12, (4), pp. 1412–1425.
    88. 88)
      • 43. Ammar, A., Benakcha, A., Bourek, A.: ‘Closed loop torque SVM-DTC based on robust super twisting speed controller for induction motor drive with efficiency optimisation’, Int. J. Hydrog. Energy, 2017, 42, (28), pp. 17940–17952.
    89. 89)
      • 61. Wei, X., Chen, D., Zhao, C.: ‘Minimisation of torque ripple of direct-torque controlled induction machines by improved discrete space vector modulation’, Electr. Power Syst. Res., 2004, 72, pp. 103–112.
    90. 90)
      • 55. Arias, A., Romeral, L., Aldabas, E., et al: ‘Stator flux optimised direct torque control system for induction motors’, Electr. Power Syst. Res., 2005, 73, pp. 257–265.
    91. 91)
      • 107. West, N.T., Lorenz, R.D.: ‘Digital implementation of stator and rotor flux-linkage observers and a stator-current observer for deadbeat direct torque control of induction machines’, IEEE Trans. Ind. Appl., 2009, 45, (2), pp. 729–736.
    92. 92)
      • 34. Idris, N.R.N., Yatim, A.H.M.: ‘Direct torque control of induction machines with constant switching frequency and reduced torque ripple’, IEEE Trans. Ind. Electron., 2004, 51, (4), pp. 758–767.
    93. 93)
      • 46. Shyu, K.-K., Lin, J.K., Pham, V.T., et al: ‘Global minimum torque ripple design for direct torque control of induction motor drives’, IEEE Trans. Ind. Electron., 2010, 57, (9), pp. 3148–3156.
    94. 94)
      • 32. Jidin, A., Idris, N.R.N., Yatim, A.H.M., et al: ‘Extending switching frequency for torque ripple reduction utilizing a constant frequency torque controller in DTC of induction motors’, J. Power Electron., 2011, 11, (2), pp. 148–155.
    95. 95)
      • 98. Mukherjee, S., Poddar, G.: ‘Direct torque control of squirrel cage induction motor for optimum current ripple using three-level inverter’, IET Power Electron., 2010, 3, (6), pp. 904–914.
    96. 96)
      • 93. Huh, S.H., Park, J.H., Choy, I., et al: ‘Nonlinear uncertainty observer for AC motor control using the radial basis function networks’, IEE Proc.-Control Theory Appl., 2004, 151, (3), pp. 369–375.
    97. 97)
      • 73. Lascu, C., Trzynadlowski, A.M.: ‘Combining the principles of sliding mode, direct torque control, and space-vector modulation in a high-performance sensorless AC drive’, IEEE Trans. Ind. Appl., 2004, 40, (1), pp. 170–177.
    98. 98)
      • 95. Lee, K.-B., Blaabjerg, F., Yoon, T.W.: ‘Speed-sensorless DTC-SVM for matrix converter drives with simple nonlinearity compensation’, IEEE Trans. Ind. Appl., 2007, 43, (6), pp. 1639–1649.
    99. 99)
      • 41. Kenny, B.H., Lorenz, R.D.: ‘Stator- and rotor-flux-based deadbeat direct torque control of induction machines’, IEEE Trans. Ind. Appl., 2003, 39, (4), pp. 1093–1101.
    100. 100)
      • 122. Tatte, Y.N., Aware, M.V.: ‘Torque ripple and harmonic current reduction in a three-level inverter-fed direct-torque-controlled five-phase induction motor’, IEEE Trans. Ind. Electron., 2017, 64, (7), pp. 5265–5275.
    101. 101)
      • 44. Jing-Xin, W., Jian-Guo, J.: ‘Combining the principles of variable structure, direct torque control, and space vector modulation for induction motor fed by matrix converter’, Bull. Pol. Acad. Sci. Tech. Sci., 2010, 58, (4), pp. 657–663.
    102. 102)
      • 74. Lascu, C., Boldea, I., Blaabjerg, F.: ‘Direct torque control of sensorless induction motor drives: a sliding-mode approach’, IEEE Trans. Ind. Appl., 2004, 40, (2), pp. 582–590.
    103. 103)
      • 102. Ambrozic, V., Buja, G.S., Menis, R.: ‘Band-constrained technique for direct torque control of induction motor’, IEEE Trans. Ind. Electron., 2004, 51, (4), pp. 776–784.
    104. 104)
      • 18. Lai, Y.-S., Chen, J.-H.: ‘A new approach to direct torque control of induction motor drives for constant inverter switching frequency and torque ripple reduction’, IEEE Trans. Energy Convers., 2001, 16, (3), pp. 220–227.
    105. 105)
      • 113. Sapin, A., Steimer, P.K., Simond, J.J.: ‘Modeling, simulation, and test of a three-level voltage-source inverter with output LC filter and direct torque control’, IEEE Trans. Ind. Appl., 2007, 43, (2), pp. 469–475.
    106. 106)
      • 35. Zaky, M.S.: ‘High performance DTC of induction motor drives over a wide speed range’, Electr. Eng., 2015, 97, pp. 139–154.
    107. 107)
      • 108. Arab Markadeh, G.R., Soltani, J.: ‘Robust direct torque and flux control of adjustable speed sensorless induction machine drive based on space vector modulation using a PI predictive controller’, Electr. Eng., 2006, 88, pp. 485–496.
    108. 108)
      • 115. Sikorski, A., Kulikowski, K., Korzeniewski, M.: ‘Modern direct torque and flux control methods of an induction machine supplied by three-level inverter’, Bull. Pol. Acad. Sci. Tech. Sci., 2013, 61, (4), pp. 771–778.
    109. 109)
      • 5. Bose, B.K.: ‘Modern power electronics and AC drives’ (PHI learning Pvt. Ltd, 2013).
    110. 110)
      • 82. Lascu, C., Boldea, I., Blaabjerg, F.: ‘Super-twisting sliding mode control of torque and flux in permanent magnet synchronous machine drives’. IECON 2013 – 39th Annual Conf. of the IEEE Industrial Electronics Society, Vienna, 2013, pp. 3171–3176.
    111. 111)
      • 16. Maes, J., Melkebeek, J.A.: ‘Speed-sensorless direct torque control of induction motors using an adaptive flux observer’, IEEE Trans. Ind. Appl., 2000, 36, (3), pp. 778–785.
    112. 112)
      • 65. Utomo, W.M., Sim, S.Y., Haron, Z.A., et al: ‘Online adaptive flux control for space vector PWM-DTC IM drives towards optimum efficiency design’, ARPN J. Eng. Appl. Sci., 2015, 10, (19), pp. 9099–9105.
    113. 113)
      • 63. Sudheer, H., Kodad, S.F., Sarvesh, B.: ‘Improvements in direct torque control of induction motor for wide range of speed operation using fuzzy logic’, J. Electr. Syst. Inf. Technol., 2017, accepted for publication, doi: 10.1016/j.jesit.2016.12.015.
    114. 114)
      • 1. Takahashi, I., Noguchi, T.: ‘A new quick-response and high-efficiency control strategy of an induction motor’, IEEE Trans. Ind. Appl., 1986, IA-22, (5), pp. 820–827.
    115. 115)
      • 23. Jidin, A., Idris, N.R.N., Yatim, A.H.M., et al: ‘An optimised switching strategy for quick dynamic torque control in DTC-hysteresis-based induction machines’, IEEE Trans. Ind. Electron., 2011, 58, (8), pp. 3391–3400.
    116. 116)
      • 81. Lascu, C., Jafarzadeh, S., Fadali, M.S., et al: ‘Direct torque control with feedback linearisation for induction motor drives’, IEEE Trans. Power Electron., 2017, 32, (3), pp. 2072–2080.
    117. 117)
      • 21. Idris, N.R.N., Yatim, A.H.M.: ‘An improved stator flux estimation in steady-state operation for direct torque control of induction machines’, IEEE Trans. Ind. Appl., 2002, 38, (1), pp. 110–116.
    118. 118)
      • 79. Hajian, M., Arab Markadeh, G.R., Soltani, J., et al: ‘Energy optimised sliding-mode control of sensorless induction motor drives’, Energy Convers. Manage., 2009, 50, pp. 2296–2306.
    119. 119)
      • 2. Takahashi, I., Ohmori, Y.: ‘High-performance direct torque control of an induction motor’, IEEE Trans. Ind. Appl., 1989, 25, (2), pp. 257–264.
    120. 120)
      • 94. Lee, K.-B., Blaabjerg, F.: ‘An improved DTC-SVM method for sensorless matrix converter drives using an overmodulation strategy and a simple nonlinearity compensation’, IEEE Trans. Ind. Electron., 2007, 54, (6), pp. 3155–3166.
    121. 121)
      • 110. Sina Sebtahmadi, S., Pirasteh, H., Aghay Kaboli, S.H., et al: ‘A 12-sector space vector switching scheme for performance improvement of matrix converter based DTC of IM drive’, IEEE Trans. Power Electron., 2015, 30, (7), pp. 3804–3817.
    122. 122)
      • 33. Salem, F.B., Masmoudi, A.: ‘A comprehensive analysis of the inverter switching frequency in Takashi DTC strategy’, COMPEL, 2007, 26, (1), pp. 148–166.
    123. 123)
      • 20. Lee, K.-B., Song, J.-H., Choy, I., et al: ‘Improvement of low-speed operation performance of DTC for three-level inverter-fed induction motors’, IEEE Trans. Ind. Electron., 2001, 48, (5), pp. 1006–1014.
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-pel.2017.0252
Loading

Related content

content/journals/10.1049/iet-pel.2017.0252
pub_keyword,iet_inspecKeyword,pub_concept
6
6
Loading
Print this page
This is a required field
Please enter a valid email address