Feedback controller design for a boost converter through evolutionary algorithms
- Author(s): Kinattingal Sundareswaran 1 ; Vadakke Devi 1 ; Selvakumar Sankar 1 ; Panugothu Srininivasa Rao Nayak 1 ; Sankar Peddapati 1
-
-
View affiliations
-
Affiliations:
1:
Electrical and Electronics Engineering Department, National Institute of Technology, Tiruchirappalli-620015, Tamil Nadu, India
-
Affiliations:
1:
Electrical and Electronics Engineering Department, National Institute of Technology, Tiruchirappalli-620015, Tamil Nadu, India
- Source:
Volume 7, Issue 4,
April 2014,
p.
903 – 913
DOI: 10.1049/iet-pel.2013.0266 , Print ISSN 1755-4535, Online ISSN 1755-4543
This study explains a systematic design procedure for the output voltage regulation of a boost-type DC–DC converter employing evolutionary algorithms. The feedback controller design for output voltage regulation is formulated as an optimisation problem and the controller constants are identified via evolutionary search. The design procedure employing genetic algorithm, differential evolution and artificial immune system is lucidly described. Computer simulation results supported by experimental evidence clearly demonstrate that the controllers estimated through evolutionary algorithms are capable of delivering enhanced output voltage regulation under different types of load and supply disturbances.
Inspec keywords: DC-DC power convertors; genetic algorithms; search problems; artificial immune systems; load regulation; control system synthesis; circuit feedback; voltage control
Other keywords: optimisation problem; supply disturbance; boost-type DC-DC converter; artificial immune system; feedback controller design; differential evolution; evolutionary search algorithm; output voltage regulation; genetic algorithm; systematic design procedure; load disturbance
Subjects: Optimisation techniques; Optimisation techniques; Power electronics, supply and supervisory circuits; Control system analysis and synthesis methods; Voltage control
References
-
-
1)
-
44. Shang, R., Jiao, L., Liu, F., Ma, W.: ‘A novel immune clonal algorithm for MO problems’, IEEE Trans. Evol. Comput., 2012, 16, (1), pp. 35–50 (doi: 10.1109/TEVC.2010.2046328).
-
-
2)
- C.-F. Hsu , I.-F. Chung , C.-M. Lin , C.-Y. Hsu . Self-regulating fuzzy control for forward DC–DC converters using an 8-bit Microcontroller. IET Power Electron. , 1 , 1 - 12
-
3)
-
18. Forsyth, A.J., Ellis, I.K., Moller, M.: ‘Adaptive control of a high-frequency DC-DC converter by parameter scheduling’, IEE Proc. Electr. Power Appl., 1999, 146, (4), pp. 447–454 (doi: 10.1049/ip-epa:19990344).
-
-
4)
- J.L. Agorreta , L. Reinaldos , R. Gonzalez , M. Borrega , J. Balda , L. Marroyo . Fuzzy switching technique applied to PWM boost converter operating in mixed conduction mode for PV systems. IEEE Trans. Ind. Electron. , 11 , 4363 - 4373
-
5)
- R. Naim , G. Weiss , S. Ben-Yaakov . H∞ control applied to boost power converters. IEEE Trans. Power Electron. , 4 , 677 - 683
-
6)
- S.C. Tan , Y.M. Lai , C.K. Tse . General design issues of sliding-mode controllers in DC–DC converters. IEEE Trans. Ind. Electron. , 3 , 1160 - 1174
-
7)
-
5. Chen, Y.-M., Liu, Y.-C., Hung, S.-C., Cheng, C.-S.: ‘Multi-input inverter for grid-connected hybrid PV/wind power system’, IEEE Trans. Power Electron., 2007, 22, (3), pp. 1070–1077 (doi: 10.1109/TPEL.2007.897117).
-
-
8)
-
7. Su, J.-T., Liu, C.-W.: ‘Gain scheduling control scheme for improved transient response of DC/DC converters’, IET Power Electron., 2012, 5, (6), pp. 678–692 (doi: 10.1049/iet-pel.2010.0313).
-
-
9)
-
22. Chan, C.Y.: ‘Development of non-linear controllers for a tri-state boost converter’, IET Power Electron., 2012, 5, (1), pp. 68–73 (doi: 10.1049/iet-pel.2011.0077).
-
-
10)
- A.J. Forsyth , S.V. Mollov . Modeling and control of DC-DC converters. Power Eng. J. , 5 , 229 - 236
-
11)
-
40. Slowik, A.: ‘Application of an adaptive differential evolution algorithm with multiple trial vectors to artificial neural network training’, IEEE Trans. Ind. Electron., 2011, 58, (8), pp. 3160–3167 (doi: 10.1109/TIE.2010.2062474).
-
-
12)
-
43. Islam, S.M., Das, S., Ghosh, S., Roy, S., Suganthan, P.N.: ‘An adaptive differential evolution algorithm with novel mutation and crossover strategies for global numerical optimization’, IEEE Trans. Syst. Man Cybern. B, Cybern., 2012, 42, (2), pp. 482–500 (doi: 10.1109/TSMCB.2011.2167966).
-
-
13)
- L. Guo , J.Y. Hung , R.M. Nelms . Evaluation of DSP-based PID and fuzzy controllers for DC–DC converters. IEEE Trans. Ind. Electron. , 6 , 2237 - 224
-
14)
-
37. Lenwari, W., Sumner, M., Zanchetta, P.: ‘The use of genetic algorithms for the design of resonant compensators for active filters’, IEEE Trans. Ind. Electron., 2009, 56, (8), pp. 2852–2861 (doi: 10.1109/TIE.2009.2018535).
-
-
15)
-
30. Sundareshwaran, K., Devi, V.: ‘Application of a modified particle swarm optimization technique for output voltage regulation of boost converter’, Electr. Power Compon. Syst., 2011, 39, pp. 288–300 (doi: 10.1080/15325008.2010.526994).
-
-
16)
-
35. Yu, Y., Xinjie, Y.: ‘Cooperative coevolutionary genetic algorithm for digital IIR filter design’, IEEE Trans. Ind. Electron., 2007, 54, (3), pp. 1311–1318 (doi: 10.1109/TIE.2007.893063).
-
-
17)
- B. Sahu , G.A. Rincon-Mora . A low voltage, dynamic, noninverting, synchronous buck–boost converter for portable applications. IEEE Trans. Power Electron. , 2 , 443 - 452
-
18)
- A. Khaligh , A.M. Rahimi , A. Emadi . Modified pulse-adjustment technique to control DC/DC converters driving variable constant-power loads. IEEE Trans. Ind. Electron. , 3 , 1133 - 1146
-
19)
-
3. Konstantopoulos, G.C., Alexandridis, A.T.: ‘Non-linear voltage regulator design for dc/dc boost converters used in photovoltaic applications: analysis and experimental results’, IET Renew. Power Gener., 2013, 7, (3), pp. 296–308 (doi: 10.1049/iet-rpg.2012.0068).
-
-
20)
-
24. Agorreta, J.L., Reinaldos, L., Gonzalez, R., Borrega, M., Balda, J., Marroyo, L.: ‘Fuzzy switching technique applied to PWM boost converter operating in mixed conduction mode for PV systems’, IEEE Trans. Ind. Electron., 2009, 56, (11), pp. 4363–4373 (doi: 10.1109/TIE.2009.2019567).
-
-
21)
-
18. Forsyth, A.J., Ellis, I.K., Moller, M.: ‘Adaptive control of a high-frequency DC-DC converter by parameter scheduling’, IEE Proc. Electr. Power Appl., 1999, 146, (4), pp. 447–454 (doi: 10.1049/ip-epa:19990344).
-
-
22)
-
7. Khaligh, A., Rahimi, A.M., Emadi, A.: ‘Modified pulse-adjustment technique to control DC/DC converters driving variable constant-power loads’, IEEE Trans. Ind. Electron., 2008, 55, (3), pp. 1133–1146 (doi: 10.1109/TIE.2007.909757).
-
-
23)
-
9. Konstantopoulos, G.C., Alexandridis, A.T.: ‘Non-linear voltage regulator design for DC/DC boost converters used in photovoltaic applications: analysis and experimental results’, IET Renew. Power Gener., 2013, 7, (3), pp. 296–308 (doi: 10.1049/iet-rpg.2012.0068).
-
-
24)
-
34. Mitchell, M.: ‘An introduction to genetic algorithms’ (Prentice-Hall of India Publications, 1996).
-
-
25)
-
42. Koumousis, V.K., Katsaras, C.P.: ‘A saw-tooth genetic algorithm combining the effects of variable population size and reinitialization to enhance performance’, IEEE Trans. Evol. Comput., 2006, 10, (1), pp. 19–28 (doi: 10.1109/TEVC.2005.860765).
-
-
26)
-
12. Mitchel, D.M.: ‘DC-DC switching regulator analysis’ (McGraw-Hill, New York, 1998).
-
-
27)
-
14. Kassakian, J.G., Schlecht, M.F., Verghese, G.C.: ‘Principles of power electronics’ (Addison-Wesley, Reading, MA, 1992).
-
-
28)
-
4. Chen, J., Maksimovic, D., Erickson, R.W.: ‘Analysis and design of a low stress buck-boost converter in universal-input PFC applications’, IEEE Trans. Power Electron., 2006, 21, (2), pp. 320–329 (doi: 10.1109/TPEL.2005.869744).
-
-
29)
-
16. Beccuti, A.G., Mariethoz, S., Cliquennois, S., Wang, S., Morari, M.: ‘Explicit model predictive control of DC-DC switched-mode power supplies with extended Kalman filtering’, IEEE Trans. Ind. Electron., 2009, 56, (6), pp. 1864–1874 (doi: 10.1109/TIE.2009.2015748).
-
-
30)
-
2. Sahu, B., Rincon-Mora, G.A.: ‘A low voltage, dynamic, non-inverting, synchronous buck-boost converter for portable applications’, IEEE Trans. Power Electron., 2004, 19, (2), pp. 443–452 (doi: 10.1109/TPEL.2003.823196).
-
-
31)
-
26. Hsu, C.-F., Chung, I.-F., Lin, C.-M., Hsu, C.-Y.: ‘Self-regulating fuzzy control for forward DC-DC converters using an 8-bit microcontroller’, IET Power Electron., 2009, 2, (1), pp. 1–13 (doi: 10.1049/iet-pel:20070179).
-
-
32)
-
38. Price, K.V., Storn, R.M., Lampinen, J.A.: ‘Differential evolution – a practical approach to global optimization’ (©Springer-Verlag, Berlin Heidelberg, 2005).
-
-
33)
-
5. Chen, Y.-M., Liu, Y.-C., Hung, S.-C., Cheng, C.-S.: ‘Multi-input inverter for grid-connected hybrid PV/wind power system’, IEEE Trans. Power Electron., 2007, 22, (3), pp. 1070–1077 (doi: 10.1109/TPEL.2007.897117).
-
-
34)
-
11. Ang, S., Oliva, A.: ‘Power switching converters’ (CRC Press, New York, 2005).
-
-
35)
-
45. Bayraktar, Z., Bossard, J.A., Wang, X., Werner, D.H.: ‘A real-valued parallel clonal selection algorithm and its application to the design optimization of multi-layered frequency selective surfaces’, IEEE Trans. Antennas Propag., 2012, 60, (4), pp. 1831–1843 (doi: 10.1109/TAP.2012.2186241).
-
-
36)
-
37. Lenwari, W., Sumner, M., Zanchetta, P.: ‘The use of genetic algorithms for the design of resonant compensators for active filters’, IEEE Trans. Ind. Electron., 2009, 56, (8), pp. 2852–2861 (doi: 10.1109/TIE.2009.2018535).
-
-
37)
-
44. Shang, R., Jiao, L., Liu, F., Ma, W.: ‘A novel immune clonal algorithm for MO problems’, IEEE Trans. Evol. Comput., 2012, 16, (1), pp. 35–50 (doi: 10.1109/TEVC.2010.2046328).
-
-
38)
-
13. Forsyth, A.J., Mollov, S.V.: ‘Modelling and control of DC-DC converters’, Power Eng. J., 1998, 12, (5), pp. 229–236 (doi: 10.1049/pe:19980507).
-
-
39)
-
23. Hiti, S., Borojevic, D.: ‘Robust nonlinear control for the boost converter’, IEEE Trans. Power Electron., 1995, 10, (6), pp. 651–658 (doi: 10.1109/63.471284).
-
-
40)
-
30. Sundareshwaran, K., Devi, V.: ‘Application of a modified particle swarm optimization technique for output voltage regulation of boost converter’, Electr. Power Compon. Syst., 2011, 39, pp. 288–300 (doi: 10.1080/15325008.2010.526994).
-
-
41)
-
3. Walker, G.R., Sernia, P.C.: ‘Cascaded dc-dc converter connection of modules’, IEEE Trans. Power Electron., 2004, 19, (4), pp. 1130–1139 (doi: 10.1109/TPEL.2004.830090).
-
-
42)
-
28. Busquets-Monge, S.: ‘Design of a boost power factor correction converter using optimization techniques’, IEEE Trans. Power Electron., 2004, 19, (6), pp. 1388–1396 (doi: 10.1109/TPEL.2004.836638).
-
-
43)
-
27. Su, J.-T., Liu, C.-W.: ‘Gain scheduling control scheme for improved transient response of DC/DC converters’, IET Power Electron., 2012, 5, (6), pp. 678–692 (doi: 10.1049/iet-pel.2010.0313).
-
-
44)
-
36. Loredo-Flores, A., Gonzalez-Galvan, E.J., Cervantes-Sanchez, J.J., Martinez-Soto, A.: ‘Optimization industrial, vision-based, intuitively generated robot point- allocating tasks using genetic algorithms’, IEEE Trans. Ind. Electron., 2008, 38, (4), pp. 600–608.
-
-
45)
-
25. Guo, L., Hung, J.Y., Nelms, R.M.: ‘Evaluation of DSP-based PID and fuzzy controllers for DC-DC converters’, IEEE Trans. Ind. Electron., 2009, 56, (6), pp. 2237–2248 (doi: 10.1109/TIE.2009.2016955).
-
-
46)
-
1. Williams, B.W.: ‘Basic DC-to-DC converters’, IEEE Trans. Power Electron., 2008, 23, (1), pp. 387–401 (doi: 10.1109/TPEL.2007.911829).
-
-
47)
-
23. Hiti, S., Borojevic, D.: ‘Robust nonlinear control for the boost converter’, IEEE Trans. Power Electron., 1995, 10, (6), pp. 651–658 (doi: 10.1109/63.471284).
-
-
48)
- S. Busquets-Monge , J.-C. Crebier , S. Ragon . Design of a boost power factor correction converter using optimization techniques. IEEE Trans. Power Electron. , 6 , 1388 - 1396
-
49)
-
42. Koumousis, V.K., Katsaras, C.P.: ‘A saw-tooth genetic algorithm combining the effects of variable population size and reinitialization to enhance performance’, IEEE Trans. Evol. Comput., 2006, 10, (1), pp. 19–28 (doi: 10.1109/TEVC.2005.860765).
-
-
50)
-
45. Bayraktar, Z., Bossard, J.A., Wang, X., Werner, D.H.: ‘A real-valued parallel clonal selection algorithm and its application to the design optimization of multi-layered frequency selective surfaces’, IEEE Trans. Antennas Propag., 2012, 60, (4), pp. 1831–1843 (doi: 10.1109/TAP.2012.2186241).
-
-
51)
-
31. Sundareswaran, K., Devi, V., Kaul, S., Rajasekar, N., Palani, S.: ‘Optimal feedback controller design for a buck converter using Gaussian type pheromone profile’, Eur. Trans. Electr. Power, 2009, 20, pp. 979–993 (doi: 10.1002/etep.376).
-
-
52)
-
29. Sundareshwaran, K., Devi, V.: ‘Feedback controller design for a boost converter through a colony of foraging ants’, Electr. Power Compon. Syst., 2012, 40, pp. 672–690 (doi: 10.1080/15325008.2011.653858).
-
-
53)
- C. Olalla , R. Leyva , A. El Aroudi , P. Garces , I. Queinnec . LMI robust control design for boost PWM converters. IET Power Electron. , 1 , 75 - 85
-
54)
-
6. Lefeuvre, E., Audigier, D., Richard, C., Guyomar, D.: ‘Buck–boost converter for sensorless power of piezoelectric energy harvester’, IEEE Trans. Power Electron., 2007, 22, (5), pp. 2018–2025 (doi: 10.1109/TPEL.2007.904230).
-
-
55)
- J.Q. Chen , D. Maksimovic , R.W. Erickson . Analysis and design of a low-stress buck-boost converter in universal-input PFC applications. IEEE Trans. Power Electron. , 2 , 320 - 329
-
56)
- N. Salvatore , A. Caponio , F. Neri . Optimization of delayed-state kalman-filter-based algorithm via differential evolution for sensorless control of induction motors. IEEE Trans. Ind. Electron. , 1 , 385 - 394
-
57)
- P.C. Sernia , G.R. Walker . Cascaded DC–DC converter connection of photovoltaic modules. IEEE Trans. Power Electron. , 4 , 1130 - 1139
-
58)
- A.G. Beccuti , S. Mariethoz , S. Cliquennois , W. Shu , M. Morari . Explicit model predictive control of DC–DC switched-mode power supplies with extended Kalman filtering. IEEE Trans. Ind. Electron. , 6 , 1864 - 1874
-
59)
- K. Jin , X. Ruan , M. Yang , M. Xu . A hybrid fuel cell power system. IEEE Trans. Ind. Electron. , 4 , 1212 - 1222
-
60)
-
17. Tan, S.-C., Lai, Y.M., Tse, C.K.: ‘General design issues of sliding-mode controllers in DC-DC converters’, IEEE Trans. Ind. Electron., 2008, 55, (3), pp. 1160–1174 (doi: 10.1109/TIE.2007.909058).
-
-
61)
-
8. Jin, K., Ruan, X., Yang, M., Xu, M.: ‘A hybrid fuel cell power system’, IEEE Trans. Ind. Electron., 2009, 56, (4), pp. 1212–1222 (doi: 10.1109/TIE.2008.2008336).
-
-
62)
-
40. Slowik, A.: ‘Application of an adaptive differential evolution algorithm with multiple trial vectors to artificial neural network training’, IEEE Trans. Ind. Electron., 2011, 58, (8), pp. 3160–3167 (doi: 10.1109/TIE.2010.2062474).
-
-
63)
-
6. Lefeuvre, E., Audigier, D., Richard, C., Guyomar, D.: ‘Buck–boost converter for sensorless power of piezoelectric energy harvester’, IEEE Trans. Power Electron., 2007, 22, (5), pp. 2018–2025 (doi: 10.1109/TPEL.2007.904230).
-
-
64)
-
33. Goldberg, D.E.: ‘Genetic algorithms in search, optimization, and machine learning’ (Addison Wesley, Reading, MA, 1989).
-
-
65)
-
41. Dasgupta, D.: ‘Artificial immune systems and their applications’ (Springer-Verlag, 1999).
-
-
66)
-
35. Yu, Y., Xinjie, Y.: ‘Cooperative coevolutionary genetic algorithm for digital IIR filter design’, IEEE Trans. Ind. Electron., 2007, 54, (3), pp. 1311–1318 (doi: 10.1109/TIE.2007.893063).
-
-
67)
-
43. Islam, S.M., Das, S., Ghosh, S., Roy, S., Suganthan, P.N.: ‘An adaptive differential evolution algorithm with novel mutation and crossover strategies for global numerical optimization’, IEEE Trans. Syst. Man Cybern. B, Cybern., 2012, 42, (2), pp. 482–500 (doi: 10.1109/TSMCB.2011.2167966).
-
-
68)
-
15. Severns, R.P., Bloom, G.E.: ‘Modern DC-to-DC switch mode power converter circuits’ (Van Nostrand, New York, 1985).
-
-
69)
-
22. Chan, C.Y.: ‘Development of non-linear controllers for a tri-state boost converter’, IET Power Electron., 2012, 5, (1), pp. 68–73 (doi: 10.1049/iet-pel.2011.0077).
-
-
70)
-
19. Sira-Ramirez, H., Perez-Moreno, R.A., Ortega, R., Garcia-Esteban, M.: ‘Passivity based controllers for the stabilization of DC-DC power converters’. Proc. 34th Conf. Decision and Control, New Orleans, LA, December 1995, pp. 3471–3476.
-
-
71)
-
31. Sundareswaran, K., Devi, V., Kaul, S., Rajasekar, N., Palani, S.: ‘Optimal feedback controller design for a buck converter using Gaussian type pheromone profile’, Eur. Trans. Electr. Power, 2009, 20, pp. 979–993 (doi: 10.1002/etep.376).
-
-
72)
-
10. Mohan, N., Undeland, T.M., Robbins, W.P.: ‘Power electronics: converters, applications and design’ (John Wiley & Sons, Inc., 2007).
-
-
73)
-
29. Sundareshwaran, K., Devi, V.: ‘Feedback controller design for a boost converter through a colony of foraging ants’, Electr. Power Compon. Syst., 2012, 40, pp. 672–690 (doi: 10.1080/15325008.2011.653858).
-
-
74)
-
1. Williams, B.W.: ‘Basic DC-to-DC converters’, IEEE Trans. Power Electron., 2008, 23, (1), pp. 387–401 (doi: 10.1109/TPEL.2007.911829).
-
-
75)
-
39. Salvatore, N., Caponio, A., Neri, F., Stasi, S., Cascella, G.L.: ‘Optimization of delayed-state Kalman-filter-based algorithm via differential evolution for sensorless control of induction motors’, IEEE Trans. Ind. Electron., 2010, 57, (1), pp. 385–394 (doi: 10.1109/TIE.2009.2033489).
-
-
76)
-
20. Naim, R., Weiss, G., Ben-Yaakov, S.: ‘H∞ control applied to boost power converters’, IEEE Trans. Power Electron., 1997, 12, (4), pp. 677–683 (doi: 10.1109/63.602563).
-
-
77)
-
21. Olalla, C., Leyva, R., El Aroudi, A., Garces, P., Queinnec, I.: ‘LMI robust control design for boost PWM converters’, IET Power Electron., 2010, 3, (1), pp. 75–85 (doi: 10.1049/iet-pel.2008.0271).
-
-
78)
-
32. Holland, J.H.: ‘Adaptation in nature and artificial science’ (MI: University of Michigan Press, Ann Arbor, 1975).
-
-
1)