access icon free Fault-location method for HVDC transmission lines based on phase frequency characteristics

A novel high-voltage direct-current (HVDC) line fault location method based on phase frequency change characteristics is proposed. The idea of the method is the travelling waves for the fault happened on different positions have different phase distortion characteristics, when they spread to the measuring terminal. By using the discrete Fourier analysis, the phase frequency characteristics were obtained. The frequency data of 40 to 60 Hz and the corresponding phase angle ratio data are selected, forming a N × 3 matrix, each row of data represents the relationship between the fault location and phase angle ratio, fitting each row of data, respectively, the mathematical relationship between the fault location and phase angle ratio can be obtained, finally realise DC line fault location by seeking average. Finally, a lot of different faults are simulated and analysed on the PSCAD platform to verify the effectiveness and robustness of the proposed method.

Inspec keywords: power transmission reliability; power transmission faults; fault location; power transmission lines; HVDC power transmission

Other keywords: phase angle ratio; phase distortion characteristics; phase frequency change characteristics; phase frequency data; DC line fault location; HVDC transmission lines; travelling waves; high-voltage direct-current line fault location method; PSCAD platform; discrete Fourier analysis

Subjects: d.c. transmission; Reliability

References

    1. 1)
      • 3. Zeng, X.J., Li, K.K., Liu, Z.Y., et al: ‘Fault location using traveling wave for power networks’. Industry Applications Conf., Seattle, WA, USA, October 2004, pp. 24262429.
    2. 2)
      • 14. Song, G.B., Zhou, D.S., Jiao, Z.B., et al: ‘A novel fault location principle for HVDC transmission line’, Autom. Electr. Power Syst., 2007, 31, (24), pp. 5761.
    3. 3)
      • 7. Li, Z.B., Huang, Y.D., Han, G.: ‘Based on mathematical morphology of high-voltage DC transmission fault location’, Control Eng. China, 2016, 23, (4), pp. 592596.
    4. 4)
      • 11. Liang, Y.S., Wang, G., Li, H.F., et al: ‘Time domain fault-location method on HVDC transmission lines under unsynchronized two-end measurement and uncertain line parameter’, IEEE Trans. Power Transm., 2015, 30, (3), pp. 10311038.
    5. 5)
      • 6. Liu, Y.H., Cai, Z.X., Xu, M., et al: ‘Single-end fault location algorithm based on traveling wave speed optimization and modal propagation time difference for DC transmission line’, Electr. Power Autom. Equip., 2012, 32, (10), pp. 7276.
    6. 6)
      • 5. Duan, J.D., Liu, J., Lu, H.L., et al: ‘Fault location method based on traveling-wave instantaneous frequency for HVDC transmission lines’. Proc. CSEE, 2016, 36, (7), pp. 18421848.
    7. 7)
      • 2. Thomas, D.W.P., Christopoulos, C., Tang, Y., et al: ‘Single ended travelling wave fault location scheme based on wavelet analysis’. Developments in Power System Protection, Amsterdam, Netherlands, April 2004, pp. 196199.
    8. 8)
      • 9. Suonan, J.L., Gao, S.P., Song, G.B., et al: ‘A novel fault-location method for HVDC transmission lines’, IEEE Trans. Power Deliv., 2010, 25, (2), pp. 12031209.
    9. 9)
      • 10. Li, H.F., Qiu, Y.D., Guo, L.X., et al: ‘Fault location method for double-circuit HVDC transmission lines on same tower based on single-circuit electrical quantities’, Autom. Electr. Power Syst., 2016, 12, pp. 172178.
    10. 10)
      • 8. Li, Y., Zhang, S., Li, H., et al: ‘A fault location method based on genetic algorithm for high-voltage direct current transmission line’, Eur. Trans. Electr. Power, 2012, 22, (6), pp. 866878.
    11. 11)
      • 13. Shu, H.C., Tian, X.C., Zhang, G.B., et al: ‘Fault location for ± 800 kV HVDC transmission lines using natural frequency of single terminal voltage data’, Proc. CSEE, 2011, 31, (25), pp. 104111.
    12. 12)
      • 15. Chen, Y.B., Ma, J., Wen, Y.Y.: ‘An adaptive robust state estimation approach for measurement noise’, Autom. Electr. Power Syst., 2015, 39, (8), pp. 6673.
    13. 13)
      • 12. Mohammad, F., Javad, S.: ‘A novel fault-location method for HVDC transmission lines based on similarity measure of voltage signals’, IEEE Trans. Power Deliv., 2013, 28, (4), pp. 24832490.
    14. 14)
      • 1. Spoor, D., Zhu, J.G.: ‘Improved single-ended traveling-wave fault-location algorithm based on experience with conventional substation transducers’, IEEE Trans. Power Deliv., 2006, 21, (3), pp. 17141720.
    15. 15)
      • 4. Sun, J.T., Wen, X.S., Wei, X.L., et al: ‘Traveling wave fault location for power cables based on wavelet transform’. Mechatronics and Automation, Harbin, China, August 2007, pp. 12831287.
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-gtd.2017.0967
Loading

Related content

content/journals/10.1049/iet-gtd.2017.0967
pub_keyword,iet_inspecKeyword,pub_concept
6
6
Loading