access icon free Transient measured impedance-based protection scheme for DC line faults in ultra high-voltage direct-current system

DC line fault is a major threat to the security of ultra high-voltage direct-current system due to complex terrain and terrible weather conditions over long distances. This study proposes a DC line backup protection method on the basis of transient measured impedance (TMI), which is defined as the ratio of transient voltage and transient current at both sides of DC line. The characteristics of TMIs are theoretically analysed for DC line faults and external faults, and these characteristics are used to construct a protection scheme. Since the TMIs only depend on the system structure, the proposed method is able to identify the faults correctly, unaffected by the fault resistance and DC line attenuation. A selection method for the faulted line is also proposed based on the ratio of transient component on the bipolar lines. Comparison with the transient-component-based protections and conventional protections demonstrates the promising performance of the proposed protection. Numerous simulations on PSCAD/EMTDC platform and the tests with field fault-recording data have validated the effectiveness of the proposed protection scheme.

Inspec keywords: HVDC power transmission; power transmission faults; power transmission protection

Other keywords: external faults; DC line attenuation; transient-component-based protections; transient voltage; ultra high-voltage direct-current system; TMI; transient measured impedance-based protection scheme; EMTDC platform; fault-recording data; DC line faults; selection method; PSCAD; fault resistance; transient current; DC line backup protection method

Subjects: d.c. transmission; Power system protection

References

    1. 1)
    2. 2)
    3. 3)
      • 10. Li, A., Cai, Z., Sun, Q., et al: ‘Study on the dynamic performance characteristics of HVDC control and protections for the HVDC line fault’. Proc. Int. Conf. on Power Energy Society General Meeting, 2009, pp. 15.
    4. 4)
    5. 5)
    6. 6)
      • 18. Xiaodong, Z., Nengling, T., Guangliang, Y.: ‘A transient protection scheme for HVDC transmission line’, IEEE Trans. Power Deliv., 2012, 27, (2), pp. 718724.
    7. 7)
    8. 8)
    9. 9)
      • 4. Feltes, J.W., Gemmell, B.D., Retzmann, D.: ‘From smart grid to super grid: solutions with HVDC and FACTS for grid access of renewable energy sources’. Proc. Int. Conf. on Power Energy Society General Meeting, 2011, pp. 16.
    10. 10)
      • 8. Naidoo, D., Ijumba, N.M.: ‘HVDC line protection for the proposed future HVDC systems’. Proc. Int. Conf. on Power System Technology, 2004, vol. 2, pp. 13271332.
    11. 11)
    12. 12)
    13. 13)
    14. 14)
      • 23. Zhikeng, L., Gang, W., Haifeng, L., et al: ‘Study on the impedance-frequency characteristic of HVDC converter under asymmetric faults in the AC system’. Proc. Int. Conf. on Power Energy Society General Meeting 2009, pp. 16.
    15. 15)
      • 22. Luo, F.L., Li, J., Xu, Z.J., et al: ‘Study on impedance-frequency characteristics of HVDC filter commutate converter’. Proc. Int. Conf. on Electric Utility Deregulation and Restructuring and Power Technologies (DRPT), 2008, pp. 16521656.
    16. 16)
    17. 17)
    18. 18)
    19. 19)
      • 6. Liang, Z., Dong, Y., Zhang, Z.: ‘Statistical analysis on forced outages of HVDC transmission systems in state grid corporation of China from 2006 to 2012’, Autom. Electr. Power Syst. (China), 2014, 38, (6), pp. 15.
    20. 20)
    21. 21)
      • 7. Xiaodong, Z., Nengling, T., Thorp, J.S., et al: ‘Improved differential protection scheme for long distance UHVDC transmission line’. Proc. Int. Conf. on Power Energy Society General Meeting, 2014, pp. 15.
    22. 22)
    23. 23)
    24. 24)
    25. 25)
      • 26. Liu, J., Fan, C., Nengling, T.: ‘A novel pilot directional protection scheme for HVDC transmission line based on specific frequency current’. Proc. Int. Conf. on Power System Technology, 2014, pp. 976982.
    26. 26)
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-gtd.2016.0408
Loading

Related content

content/journals/10.1049/iet-gtd.2016.0408
pub_keyword,iet_inspecKeyword,pub_concept
6
6
Loading