Optimal unified power flow controller application to enhance total transfer capability
- Author(s): Abbas Rajabi-Ghahnavieh 1 ; Mahmud Fotuhi-Firuzabad 2 ; Muhammad Othman 3
-
-
View affiliations
-
Affiliations:
1:
Sharif Energy Research Institute, Tehran, Iran;
2: Department of Electrical Engineering, Center of Excellence in Power system Control and Management, Sharif University of Technology, Tehran, Iran;
3: Faculty of Electrical Engineering, UniversitiTeknologi MARA, 40450, Selangor, Shah Alam, Malaysia
-
Affiliations:
1:
Sharif Energy Research Institute, Tehran, Iran;
- Source:
Volume 9, Issue 4,
05 March 2015,
p.
358 – 368
DOI: 10.1049/iet-gtd.2014.0110 , Print ISSN 1751-8687, Online ISSN 1751-8695
For a power transfer path, total transfer capability (TTC) represents maximum power that can be transferred over the transmission system. Unified power flow controller (UPFC) is a device that can be used to increase in TTC. This study presents a new method for optimal UPFC application to minimise power loss while enhancing TTC. Based on UPFC injection model, the solution region of UPFC parameters is first found using the proposed method to maximise TTC. It then searches the solution region to find optimal UPFC control mode and setting to minimise system power loss. The proposed method is applied to the IEEE-Reliability Test System and the UPFC application impact are evaluated. Comparative studies are conducted between the TTC results obtained by the proposed method with those obtained using the existing approaches.
Inspec keywords: power transmission control; load flow control
Other keywords: transmission system; power loss minimisation; optimal unified power flow controller application; power transfer path; IEEE-reliability test system; total transfer capability; TTC; UPFC injection model
Subjects: Power system control; Power transmission, distribution and supply; Control of electric power systems
References
-
-
1)
-
23. Rajabi Ghahnavieh, A., Fotuhi Firuzabad, M., Shahidehpour, M., Feuillet, R.: ‘UPFC for enhancing power system reliability’, IEEE Trans. Power Deliv., 2010, 25, (4), pp. 2881–2890 (doi: 10.1109/TPWRD.2010.2051822).
-
-
2)
-
7. North American Electricity Reliability Council: ‘Available Transfer Capability: Definitions and determination’, June 1996.
-
-
3)
- C.D. Schauder , E. Stacey , M. Lund , M. Keri , A. Mehraban , A. Edris , L. Gyugyi , L. Kovalsky . AEP UPFC project: installation, commissioning and operation of the ±160 MVA STATCOM (phase I). IEEE Trans. Power Deliv. , 4 , 1530 - 1535
-
4)
-
22. Abdel-Moamen, M.A., Padhy, N.P.: ‘Optimal power flow incorporating FACTS devices – bibliography and survey’. IEEE Trans. and Dist. Conf. and Exposition, 2003, vol. 2, pp. 669–676.
-
-
5)
-
16. Faried, S.O., Billinton, R., Aboreshaid, S.: ‘Probabilistic technique for sizing FACTS devices for steady state voltage profile enhancement’, IET Gener. Transm. Distrib., 2009, 3, pp. 385–392 (doi: 10.1049/iet-gtd.2008.0398).
-
-
6)
-
5. Ghahremani, E., Kamwa, I.: ‘Optimal placement of multiple-type FACTS devices to maximize power system loadability using a generic graphical user interface’, IEEE Trans. Power Syst., 2013, 28, (2), pp. 764–778 (doi: 10.1109/TPWRS.2012.2210253).
-
-
7)
-
21. Kalyani, R.P., Crow, M.L., Tauritz, D.R.: ‘Optimal placement and control of unified power flow control devices using evolutionary computing and sequential quadratic programming’. IEEE Power Systems Conf. and Exposition, 2006, pp. 959–964.
-
-
8)
-
5. Murali, M., Gopalakrishnan, N., Pande, V.N.: ‘studies on the response characteristics of Z-unified power flow controller’. IET Int. Conf. on AC and DC Power Transmission, 2012, p. 02.
-
-
9)
-
19. Taher, S.A., Amooshahi, M.K.: ‘New approach for optimal UPFC placement using hybrid immune algorithm in electric power systems’, Int. J. Electr. Power Energy Syst., 2012, 43, (1), pp. 899–909 (doi: 10.1016/j.ijepes.2012.05.064).
-
-
10)
-
17. Galloway, S.J., Elders, I.M., Burt, G.M., Sookananta, B.: ‘Optimal flexible alternative current transmission system device allocation under system fluctuations due to demand and renewable generation’, IET Gener. Transm. Distrib., 2010, 4, (6), pp. 725–735 (doi: 10.1049/iet-gtd.2009.0221).
-
-
11)
-
18. Fardanesh, B.: ‘Optimal utilization, sizing, and steady-state performance comparison of multiconverter VSC-based FACTS controllers’, IEEE Trans. Power Deliv., 2004, 19, pp. 1321–1327 (doi: 10.1109/TPWRD.2004.829154).
-
-
12)
-
11. Rahimzadeh, S., TavakoliBina, M., Viki, A.H.: ‘Simultaneous application of multi-type FACTS devices to the restructured environment: achieving both optimal number and location’, IET Gener. Transm. Distrib., 2010, 4, (3), pp. 349–362 (doi: 10.1049/iet-gtd.2009.0287).
-
-
13)
-
28. IEEE Reliability Test System Task Force: ‘IEEE reliability test system’, IEEE Trans. Power Appar. Syst., 1979, 6, pp. 2047–2054.
-
-
14)
-
30. Rajabi-Ghahnavieh, A.: ‘Probabilistic ATC Assessment Incorporating UPFC’. Ph.D. dissertation, Sharif University of Technology, Tehran, Iran, 2010.
-
-
15)
-
19. Shaheen, H.I., Rashed, G.I., Cheng, S.J.: ‘Optimal location and parameter setting of UPFC for enhancing power system security based on differential evolution algorithm’, Int. J. Electr. Power Energy Syst., 2011, 33, (1), pp. 94–105 (doi: 10.1016/j.ijepes.2010.06.023).
-
-
16)
-
19. Zarate-Mihano, R., Conejo, A.J., Milano, F.: ‘OPF-based security redispatching including FACTS devices’, IET Gener. Transm. Distrib. J., 2008, 2, (6), pp. 821–833 (doi: 10.1049/iet-gtd:20080064).
-
-
17)
-
8. Chen, D., Xia, Z., Wei, L., Feng, X., Hui, L., Zhi-dong, W.: ‘A survey of methods for improving the UHV power system transfer capacity’. Int. Conf. on Sustainable Power Generation and Supply, 2012, p. 7.
-
-
18)
-
29. Pievatolo, A., Tironi, E., Valade, I.: ‘Semi-Markov processes for power system reliability assessment with application to uninterruptible power supply’, IEEE Trans. Power Syst., 2004, 19, pp. 1326–1333 (doi: 10.1109/TPWRS.2004.826756).
-
-
19)
-
1. Song, Y.H., Johns, A.T.: ‘Flexible AC transmission systems’ (Institution of Engineering and Technology Press, 2000).
-
-
20)
-
25. Nguyen, T.T., Nguyen, V.L.: ‘Representation of line optimization control in unified power-flow controller model for power-flow analysis’, IET Gener. Transm. Distrib., 2007, 1, (5), pp. 714–723 (doi: 10.1049/iet-gtd:20060372).
-
-
21)
-
17. Sarkera, J., Goswamib, S.K.: ‘Solution of multiple UPFC placement problems using gravitational search algorithm’, Int. J. Electr. Power Energy Syst., 2014, 55, pp. 531–541 (doi: 10.1016/j.ijepes.2013.10.008).
-
-
22)
-
16. Eslamia, M., Shareef, H., Taha, M.R., et al: ‘Adaptive particle swarm optimization for simultaneous design of UPFC damping controllers’, Int. J. of Elect. Power & Energy Systems, 2014, 57, pp. 116–128 (doi: 10.1016/j.ijepes.2013.11.034).
-
-
23)
-
26. Rajabi-Ghahnavieh, A., Fotuhi-Firuzabad, M., Shahidehpour, M., Feuillet, R.: ‘NATC and RATC calculation in restructured power systems’, Int. Rev. Electr. Eng., 2009, 4, (4), pp. 592–600.
-
-
24)
-
15. Hassan, L.H., Moghavvemi, M., Haider, C., et al: ‘Application of genetic algorithm in optimization of unified power flow controller parameters and its location in the power system network’, Int. J. Electr. Power Energy Syst., 2013, 46, pp. 89–97 (doi: 10.1016/j.ijepes.2012.10.011).
-
-
25)
-
4. KarbalayeZadeh, M., Khatami, V., Lesani, H., Ravaghi, H.A.: ‘A fuzzy control strategy to damp multi mode oscillations of power system considering UPFC’. Int. Conf. on Advances in Power System Control, Operation and Management, 2009, p. 121.
-
-
26)
-
20. Venayagamoorthy, G.K.: ‘Optimal control parameters for a UPFC in a multimachine using PSO’. Proc. of the 13th Int. Conf. on Intelligent Systems Application to Power Systems, 2005, pp. 1–6.
-
-
27)
-
9. Komoni, V., Krasniqi, I., Kabashi, G., Alidemaj, A.: ‘Control active and reactive power flow with UPFC connected in transmission line’. MEDPOWER, 2012, p. 31.
-
-
28)
-
6. Ghahremani, E., Kamwa, I.: ‘Analysing the effects of different types of FACTS devices on the steady-state performance of the Hydro-Québec network’, IET Gener. Transm. Distib., 2014, 8, (2), pp. 233–249 (doi: 10.1049/iet-gtd.2013.0316).
-
-
29)
-
24. Pereira, M., Cera Zanetta, L.: ‘A current based model for load flow studies with UPFC’, IEEE Trans. Power Syst., 2013, 28, (2), pp. 677–682 (doi: 10.1109/TPWRS.2012.2206409).
-
-
30)
-
3. Ramesh, N., Sanker Ram, B.V., Subrahmanyam, V., Muralikrishna, R.: ‘Voltage/line stability indices assessment in a strategic dispatch of maximum reactive power with UPFC’. Int. Conf. on Sustainable Energy and Intelligent Systems, 2011, pp. 369–372.
-
-
1)