access icon free A series flywheel architecture for power levelling and mitigation of DC voltage transients in multi-terminal HVDC grids

This study proposes a new architecture of flywheel energy storage system (FESS) which can be implemented at generating unit (GU) level (e.g. wind turbine) or scaled up for application in grid-side converter (GSC) stations of a multi-terminal direct current (MTDC) system. The proposed architecture suppresses DC voltage leaps under grid faults, and performs power levelling duty at grid connection points. When implemented at GU level, the proposed FESS features a doubly-fed induction machine (DFIM) – the flywheel machine – where its six stator winding terminals are connected in series between the grid and the GSC. The flywheel converter is of partial power rating, and is connected to the DFIM rotor. When employed at an MTDC GSC station, several submodules are connected to build an FESS station. The study proposes the control concept and the general topology of the FESS station. The performance parameters of the system are tested under normal and abnormal operating conditions. Results and analyses indicate smooth dynamic operation, the economic advantage and the improved fault ride-through capability because of the proposed system.

Inspec keywords: power transmission faults; HVDC power transmission; rotors; flywheels; asynchronous machines; power system transients; stators; HVDC power convertors; power grids

Other keywords: FESS station; doubly-fed induction machine; MTDC system; grid-side converter station; GU level; flywheel machine; DFIM rotor; generating unit level; series flywheel architecture; grid connection points; DC voltage leaps; GSC stations; smooth dynamic operation; flywheel energy storage system; flywheel converter; power mitigation; stator winding terminals; fault ride-through capability; multiterminal HVDC grids; DC voltage transients; grid faults; partial power rating; multiterminal direct current system; power levelling duty

Subjects: DC-AC power convertors (invertors); Asynchronous machines; d.c. transmission; Other energy storage

References

    1. 1)
    2. 2)
    3. 3)
    4. 4)
      • 2. Technical Requirements for the Connection of Generation Facilities to the Hydro-Quebec Transmission System: Suppl. Requirements for Wind Generation, Hydro-Quebec, Tech. Rep. May 2003, Revised 2005.
    5. 5)
    6. 6)
    7. 7)
    8. 8)
    9. 9)
    10. 10)
      • 9. Nakajima, T., Irokawa, S.: ‘A control system for HVDC transmission by voltage sourced converters’. IEEE Power Engineering Society Summer Meeting, Edmonton, 1999, pp. 11131119.
    11. 11)
    12. 12)
    13. 13)
    14. 14)
      • 41. Wu, B., Lang, Y., Zargari, N., Kouro, S.: ‘Power conversion and control of wind energy systems’ (Wiley, IEEE Press, 2011), ISBN 978-1-118-02900-8.
    15. 15)
    16. 16)
      • 16. Liang, J., Gomis-Bellmunt, O., Ekanayake, J., Jenkins, N.: ‘Control of multi-terminal VSC-HVDC transmission for offshore wind power’. European Power Electronics and Applications Conf., EPE'09, 2009, pp. 110.
    17. 17)
    18. 18)
      • 39. Heier, S.: ‘Grid integration of wind energy conversion systems’ (Wiley, 1998), ISBN 0-471-97143-X.
    19. 19)
    20. 20)
    21. 21)
    22. 22)
      • 24. Beacon Power Corporation: ‘Performance of first 20 MW commercial flywheel frequency regulation plant’, June 2011, available at http://www.beaconpower.com/files/Beacon_Power_presentation_ESA%206_7_11_FINAL.pdf.
    23. 23)
      • 26. Vazquez, S., Lukic, S.M., Galvan, E., Franquelo, L.G., Carrasco, J.M.: ‘Energy storage systems for transport and grid applications’, IEEE Trans. Power Electron., 2010, 57, (12), pp. 38813895.
    24. 24)
    25. 25)
    26. 26)
      • 1. Grid code – high and extra high voltage’ (E.ON Netz GmbH, Bayreuth, Germany, 2006).
    27. 27)
    28. 28)
    29. 29)
    30. 30)
      • 44. Zhou, G., Shi, X.: ‘Research on the model and control strategy of one multi-module-converter based VSC-HVDC’. IEEE Int. Symp. on Industrial Electronics, ISIE 2007, 2007, pp. 759763.
    31. 31)
      • 38. Gowaid, I.A., El-Zawawi, A., El-Gammal, M.: ‘Improved inertia and frequency support from grid-connected DFIG wind farms’. IEEE Power Systems Conf. & Exposition (PSCE), March 2011.
    32. 32)
    33. 33)
    34. 34)
    35. 35)
      • 4. Bresesti, P., Kling, W.L., Vailati, R.: ‘Transmission expansion issues for offshore wind farms integration in Europe’. IEEE Transmission and Distribution Conf. and Exposition, Chicago, IL, USA, 2008.
    36. 36)
    37. 37)
      • 10. Nakajima, T.: ‘Operating experiences of STATCOMs and a three terminal HVDC system using voltage sourced converters in Japan’. IEEE Transmission & Distribution Conf. and Exposition, 2002, vol. 2, pp. 13871392.
    38. 38)
      • 40. Beacon Power Corporation: ‘Fact sheet – frequency regulation and flywheels’, available at http://www.beaconpower.com/files/Flywheel_FR-Fact-Sheet.pdf.
    39. 39)
    40. 40)
    41. 41)
    42. 42)
    43. 43)
    44. 44)
      • 34. Nayli, A., Guizani, S., Ben Ammar, F.: ‘Open-end winding induction machine supplied by two flying capacitor multilevel inverters’. 2013 Int. Conf. on Electrical Engineering and Software Applications (ICEESA), 21–23 March 2013, pp. 16.
    45. 45)
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-gtd.2013.0953
Loading

Related content

content/journals/10.1049/iet-gtd.2013.0953
pub_keyword,iet_inspecKeyword,pub_concept
6
6
Loading