© The Institution of Engineering and Technology
In this work, the massive modelling and computation costs required by the calculation of the magnetic leakage coefficient were avoided by using the threedimensional finite element method (3DFEM) in the initial design and optimisation of hybrid magnetic couplers (HMCs). The equivalent magnetic circuit network model of HMCs was established, and the equivalent reluctance of the model was calculated to obtain the analytic expression of the magnetic leakage coefficient of HMCs. A set of 1:2 prototypes was designed and manufactured. Simulation analysis and experimental tests were conducted to verify the correctness of the calculation of magnetic leakage. The calculated and experimental values of the magnetic leakage coefficient and the 3DFEM were in good agreement. The output torque value of the HMC was analysed and calculated by considering that the airgap leakage was closer to the test value and was more accurate than the value calculated without considering the airgap leakage effect. This study provided a theoretical reference for the design and investigation of HMCs.
References


1)

13. Yanjun, G.E., Yunzhuo, S.H.I., Feng, J.I.A., et al: ‘Leakage coefficient computation of permanent magnetic asynchronous coupling’, Mach. Des. Manuf., 2013, 1, (7), pp. 67–70.

2)

9. Wang, J., Lin, H., Fang, S., et al: ‘A general analytical model of permanent magnet eddy current couplings’, IEEE Trans. Magn., 2014, 50, (1), pp. 1–9.

3)

11. Mohammadi, S., Mirsalim, M.: ‘Design optimization of doublesided permanentmagnet radialflux eddycurrent couplers’, Electr. Power Syst. Res., 2014, 108, (3), pp. 282–292.

4)

7. Wang, J., Zhu, J.: ‘A simple method for performance prediction of permanent magnet eddy current couplings using a new magnetic equivalent circuit model’, IEEE Trans. Ind. Electron., 2018, 65, (3), pp. 2487–2495.

5)

8. Kim, J.M., Choi, J.Y., Koo, M.M., et al: ‘Characteristic analysis of tubulartype permanentmagnet linear magnetic coupling based on analytical magnetic field calculations’, IEEE Trans. Appl. Supercond., 2016, 26, (4), pp. 1–5.

6)

19. Jafarboland, M., Sargazi, M.M.: ‘Analytical modelling of the effect of pole offset on the output parameters of BLDC motor’, IET Electr. Power Appl., 2018, 12, (5), pp. 666–676.

7)

3. Gok, K.: ‘Development of threedimensional finite element model to calculate the turning processing parameters in turning operations’, Measurement, 2015, 75, pp. 57–68.

8)

14. Chaojun, Y., Lingying, K., Tao, Z., et al: ‘Research on 3D airgap magnetic field of field modulated asynchronous magnetic couplings’, J. Mech. Eng., 2016, 52, (8), pp. 8–15.

9)

6. Christen, R., Bergamini, A., Motavalli, M.: ‘Threedimensional localization of defects in stay cables using magnetic flux leakage methods’, J. Nondestruct. Eval., 2003, 22, (3), pp. 93–101.

10)

20. Shuang, W., Yongcun, G., Pengyu, W., et al: ‘Design and experimental research on hybrid magnetic coupler’, J. Xi'an Jiaotong Univ., 2017, 51, (7), pp. 115–123.

11)

17. Menezes, L.R.A.X.D., Ajayi, A., Christopoulos, C., et al: ‘Efficient computation of stochastic electromagnetic problems using unscented transforms’, IET Sci. Meas. Technol., 2008, 2, (2), pp. 88–95.

12)

18. Zhang, B., Wan, Y., Li, Y., et al: ‘Optimized design research on adjustablespeed permanent magnet coupling’. IEEE Int. Conf. on Industrial Technology 2013, Cape Town, South Africa, February 25–27, 2013.

13)

2. Dutt, A., Varshney, S.K., Mahapatra, S.: ‘Design of tunable couplers using magnetic fluid filled threecore optical fibers’, IEEE Photonics Technol. Lett., 2012, 24, (3), pp. 164–166.

14)

1. Merdzan, M., Jumayev, S., Borisavljevic, A., et al: ‘Electrical and magnetic model coupling of permanent magnet machines based on the harmonic analysis’, IEEE Trans. Magn., 2015, 51, (11), pp. 1–4.

15)

15. Mohammadi, S., Mirsalim, M., VaezZadeh, S., et al: ‘Analytical modeling and analysis of axialflux interior permanentmagnet couplers’, IEEE Trans. Ind. Electron., 2014, 61, (11), pp. 5940–5947.

16)

4. Wen, T., Ou, W.X., Liu, Q., et al: ‘Predication and analysis of positioning status of largescale billets on forging dies using multibody dynamics simulation’, Int. J. Adv. Manuf. Technol., 2015, 80, (1), pp. 447–453.

17)

16. Mohammadi, S., Mirsalim, M.: ‘Doublesided permanentmagnet radialflux eddy current couplers: threedimensional analytical modelling, static and transient study, and sensitivity analysis’, IET Electr. Power Appl., 2013, 7, (9), pp. 665–679.

18)

10. Budhia, M., Boys, J.T., Covic, G., et al: ‘Development of a singlesided flux magnetic coupler for electric vehicle IPT charging systems’, IEEE Trans. Ind. Electron., 2013, 60, (1), pp. 318–328.

19)

12. Mohammadi, S., Mirsalim, M., VaezZadeh, S.: ‘Nonlinear modeling of eddycurrent couplers’, IEEE Trans. Energy Convers., 2014, 29, (1), pp. 224–231.

20)

5. Fetzer, J., Kurz, S., Lehner, G., et al: ‘Application of BEMFEM coupling and the vector preisach model for the calculation of 3D magnetic fields in media with hysteresis’, IEEE Trans. Magn., 2000, 36, (4), pp. 1258–1262.
http://iet.metastore.ingenta.com/content/journals/10.1049/ietepa.2018.5808
Related content
content/journals/10.1049/ietepa.2018.5808
pub_keyword,iet_inspecKeyword,pub_concept
6
6