PMSG-based wind energy conversion systems: survey on power converters and controls

Venkata Yaramasu; Apparao Dekka; Mario J. Durán; Samir Kouro; Bin Wu

PMSG-based wind energy conversion systems: survey on power converters and controls

View Fulltext

Author(s): Venkata Yaramasu ¹ ; Apparao Dekka ² ; Mario J. Durán ³ ; Samir Kouro ⁴ ; Bin Wu ²
- Affiliations: 1: School of Informatics, Computing, and Cyber Systems (SICCS), Northern Arizona University, Flagstaff 86011, AZ, USA ;
  2: Department of Electrical and Computer Engineering, Ryerson University, Toronto, ON, Canada, M5B 2K3 ;
  3: Department of Electrical Engineering, University of Málaga, Andalusia, 29071, Spain ;
  4: Department of Electronics, Universidad Tecnica Federico Santa Maria, Valparaiso, Chile
Source: Volume 11, Issue 6, July 2017, p. 956 – 968
DOI: 10.1049/iet-epa.2016.0799 , Print ISSN 1751-8660, Online ISSN 1751-8679

Received 21/11/2016, Accepted 09/02/2017, Revised 27/01/2017, Published 01/07/2017

The permanent magnet synchronous generator (PMSG) is dominantly used in the present wind energy market. Reflecting the latest wind energy market trends and research articles, this study presents a survey on important electrical engineering aspects for PMSG-based megawatt-level wind energy conversion systems (WECSs). A comprehensive analysis on power converter topologies for wind turbines (WTs), grid integration of wind farms, digital control schemes, fault-ride-through compliance methods, and future trends is presented. The updated market share, technology trends, WT products information, in-depth technical analysis, and promising research works highlighted in this study will help the reader to understand the state-of-the-art and emerging technologies for PMSG-based WECS.

References

1. 1)
  - 1. Yaramasu, V., Wu, B.: ‘Model predictive control of wind energy conversion systems’ (Wiley-IEEE Press, Hoboken, NJ, 2016, 1st edn.).
2. 2)
  - 14. Teodorescu, R., Liserre, M., Rodriguez, P.: ‘Grid converters for photovoltaic and wind power systems’ (Wiley-IEEE Press, Chichester, UK, 2011).
3. 3)
  - 1. Cardenas, R., Pena, R., Alepuz, S., Asher, G.: ‘Overview of control systems for the operation of DFIGs in wind energy applications’, IEEE Trans. Ind. Electron., 2013, 60, pp. 2776–2798 (doi: 10.1109/TIE.2013.2243372).
4. 4)
  - 74. Zhao, J., Li, X., Hao, J., et al: ‘Reactive power control of wind farm made up with doubly fed induction generators in distribution system’, Int. J. Electr. Power Syst. Res., 2010, 80, (6), pp. 698–706 (doi: 10.1016/j.epsr.2009.10.036).
5. 5)
  - 22. Dai, J., Xu, D., Wu, B.: ‘A novel control scheme for current-source converter-based PMSG wind energy conversion systems’, IEEE Trans. Power Electron., 2009, 24, (4), pp. 963–972 (doi: 10.1109/TPEL.2008.2010259).
6. 6)
  - 5. Haque, Md.E., Negnevitsky, M., Muttaqi, K.M.: ‘A novel control strategy for a variable speed wind turbine with a permanent-magnet synchronous generator’, IEEE Trans. Ind. Appl., 2010, 46, (1), pp. 331–339 (doi: 10.1109/TIA.2009.2036550).
7. 7)
  - 26. Yuan, X., Chai, J., Li, Y.: ‘A transformer-less high-power converter for large permanent magnet wind generator systems’, IEEE Trans. Sustain. Energy, 2012, 3, (3), pp. 318–329 (doi: 10.1109/TSTE.2012.2184806).
8. 8)
  - 22. Morimoto, S., Nakayama, H., Sanada, M., et al: ‘Sensorless output maximization control for variable-speed wind generation system using IPMSG’, IEEE Trans. Ind. Appl., 2005, 41, (1), pp. 60–67 (doi: 10.1109/TIA.2004.841159).
9. 9)
  - 3. Global Wind Energy Council (GWEC): ‘Global wind report: annual market update’, 2015. Available at http://www.gwec.net, accessed on October 2016.
10. 10)
  - 27. Xu, Z., Li, R., Xu, D., et al: ‘Control of parallel multiple converters for direct-drive permanent-magnet wind power generation systems’, IEEE Trans. Power Electron., 2012, 27, (3), pp. 1259–1270 (doi: 10.1109/TPEL.2011.2165224).
11. 11)
  - 25. Bresesti, P., Kling, W.L., Hendriks, R.L., et al: ‘HVDC connection of offshore wind farms to the transmission system’, IEEE Trans. Energy Convers., 2007, 22, (1), pp. 37–43 (doi: 10.1109/TEC.2006.889624).
12. 12)
  - 22. ‘Gamesa technological corporation s.a., Gamesa 5.0 MW [online]’, 2016. Available at http://www.gamesacorp.com, accessed on October 2016.
13. 13)
  - 9. E.ON Netz Gmbh: ‘Grid code – high and extra high voltage’, April 2006.
14. 14)
  - 61. Leon, J.I., Kouro, S., Franquelo, L.G., et al: ‘The essential role and the continuous evolution of modulation techniques for voltage-source inverters in the past, present, and future power electronics’, IEEE Trans. Ind. Electron., 2016, 63, (5), pp. 2688–2701 (doi: 10.1109/TIE.2016.2519321).
15. 15)
  - 55. Musunuri, S., Ginn, H.: ‘Comprehensive review of wind energy maximum power extraction algorithms’. IEEE Power and Energy Society (PES) General Meeting, San Diego, CA, USA, July 2011, pp. 1–8.
16. 16)
  - 80. Zhong, Q.-C., Hornik, T.: ‘Control of power inverters in renewable energy and smart grid integration’, ser. IEEE Press Series on Power Engineering (Wiley-IEEE Press, Chichester, UK, 2013, 1st edn.).
17. 17)
  - 81. Tse, C.K.: ‘Sliding mode control of switching power converters: techniques and implementation’ (CRC Press, Boca Raton, FL, USA, 2011).
18. 18)
  - 31. Xia, Y., Fletcher, J., Finney, S., et al: ‘Torque ripple analysis and reduction for wind energy conversion systems using uncontrolled rectifier and boost converter’, IET Renew. Power Gener., 2011, 5, (5), pp. 377–386 (doi: 10.1049/iet-rpg.2010.0108).
19. 19)
  - 78. Mohammad, S., Salvador, A., Morkoc, H.: ‘Emerging gallium nitride based devices’, Proc. IEEE, 1995, 83, (10), pp. 1306–1355 (doi: 10.1109/5.469300).
20. 20)
  - 13. Duran, M.J., Barrero, F.: ‘Recent advances in the design, modeling, and control of multiphase machines – part II’, IEEE Trans. Ind. Electron., 2016, 63, (1), pp. 459–468 (doi: 10.1109/TIE.2015.2448211).
21. 21)
  - 28. Iov, F., Blaabjerg, F., Clare, J., et al: ‘UNIFLEX-PM - a key-enabling technology for future European electricity networks’, Eur. Power Electron. Drives Assoc. J., 2009, 19, (4), pp. 6–16.
22. 22)
  - 1. Yaramasu, V., Wu, B., Sen, P.C., et al: ‘High-power wind energy conversion systems: state-of-the-art and emerging technologies’, Proc. IEEE, 2015, 103, (5), pp. 740–788 (doi: 10.1109/JPROC.2014.2378692).
23. 23)
  - 68. Dekka, A., Wu, B., Yaramasu, V., et al: ‘Dual-stage model predictive control with improved harmonic performance for modular multilevel converter’, IEEE Trans. Ind. Electron., 2016, 63, (10), pp. 6010–6019 (doi: 10.1109/TIE.2016.2571259).
24. 24)
  - 19. Pacas, M., Weber, J.: ‘Predictive direct torque control for the PM synchronous machine’, IEEE Trans. Ind. Electron., 2005, 52, (5), pp. 1350–1356 (doi: 10.1109/TIE.2005.855662).
25. 25)
  - 35. Yamamoto, E., Hara, H., Uchino, T., et al: ‘Development of MCs and its applications in industry [industry forum]’, IEEE Ind. Electron. Mag., 2011, 5, (1), pp. 4–12 (doi: 10.1109/MIE.2011.940249).
26. 26)
  - 8. Barberis Negra, N., Todorovic, J., Ackermann, T.: ‘Loss evaluation of HVAC and HVDC transmission solutions for large offshore wind farms’, Electr. Power Sys. Res., 2006, 76, (11), pp. 916–927 (doi: 10.1016/j.epsr.2005.11.004).
27. 27)
  - 7. Koutroulis, E., Kalaitzakis, K.: ‘Design of a maximum power tracking system for wind-energy-conversion applications’, IEEE Trans. Ind. Electron., 2006, 53, (2) (doi: 10.1109/TIE.2006.870658).
28. 28)
  - 92. Blaabjerg, F., Teodorescu, R., Liserre, M., Timbus, A.V.: ‘Overview of control and grid synchronization for distributed power generation systems’, IEEE Trans. Ind. Electron., 2006, 53, (5), pp. 1398–1409 (doi: 10.1109/TIE.2006.881997).
29. 29)
  - 11. Keung, P.K., Li, P., Banakar, H., et al: ‘Kinetic energy of wind turbine generators for system frequency support’, IEEE Trans. Power Syst., 2009, 24, (1), pp. 279–287 (doi: 10.1109/TPWRS.2008.2004827).
30. 30)
  - 43. Popova, L., Pyrhonen, J., Ma, K., et al: ‘Device loading of modular multilevel converter MMC in wind power application’. Int. Power Electronics Conf. (IPEC), Hiroshima, Japan, May 2014, pp. 548–554.
31. 31)
  - 24. Senturk, O.S., Helle, L., Munk-Nielsen, S., et al: ‘Power capability investigation based on electrothermal models of press-pack IGBT three-level NPC and ANPC VSCs for multimegawatt wind turbines’, IEEE Trans. Power Electron., 2012, 27, (7), pp. 3195–3206 (doi: 10.1109/TPEL.2011.2182661).
32. 32)
  - 3. Kouro, S., Malinowski, M., Gopakumar, K., et al: ‘Recent advances and industrial applications of multilevel converters’, IEEE Trans. Ind. Electron., 2010, 57, pp. 2553–2580 (doi: 10.1109/TIE.2010.2049719).
33. 33)
  - 4. Navigant Research: ‘A BTM wind report: world wind energy market update’, 2016. Available at http://www.navigantresearch.com, accessed on November 2016.
34. 34)
  - 8. Flourentzou, N., Agelidis, V.G., Demetriades, G.D.: ‘VSC-based HVDC power transmission systems: an overview’, IEEE Trans. Power Electr., 2009, 24, (3), pp. 592–602 (doi: 10.1109/TPEL.2008.2008441).
35. 35)
  - 34. Brisset, S., Vizireanu, D., Brochet, P.: ‘Design and optimization of a nine-phase axial-flux PM synchronous generator with concentrated winding for direct-drive wind turbine’, IEEE Trans. Ind. Appl., 2008, 44, (3), pp. 707–715 (doi: 10.1109/TIA.2008.921379).
36. 36)
  - 12. Yaramasu, V., Wu, B., Alepuz, S., et al: ‘Predictive control for low voltage RDE-through enhancement of three-level boost and NPC converter based PMSG wind turbine’, IEEE Trans. Ind. Electron., 2014, 61, (12), pp. 6832–6843 (doi: 10.1109/TIE.2014.2314060).
37. 37)
  - 12. Zhao, Y., Wei, C., Zhang, Z., et al: ‘A review on position/speed sensorless control for permanent-magnet synchronous machine-based wind energy conversion systems’, IEEE J. Emerg. Sel. Top. Power Electron., 2013, 1, (4), pp. 203–216 (doi: 10.1109/JESTPE.2013.2280572).
38. 38)
  - 22. Chinchilla, M., Arnaltes, S., Burgos, J.: ‘Control of permanent-magnet generators applied to variable-speed wind-energy systems connected to the grid’, IEEE Trans. Energy Convers, 2006, 21, (1), pp. 130–135 (doi: 10.1109/TEC.2005.853735).
39. 39)
  - 56. Abdullah, M., Yatim, A., Tan, C., et al: ‘A review of maximum power point tracking algorithms for wind energy systems’, J. Renew. Sustain. Energy Rev., 2012, 16, (5), pp. 3220–3227 (doi: 10.1016/j.rser.2012.02.016).
40. 40)
  - 18. Erdman, W., Behnke, M.: ‘Low wind speed turbine project phase II: the application of medium-voltage electrical apparatus to the class of variable speed multi-megawatt low wind speed turbines’ (National Renewable Energy Laboratory (N.R.E.L.), Golden, CO, USA, 2012).
41. 41)
  - 25. Chivite-Zabalza, J., Larrazabal, I., Zubimendi, I., et al: ‘Multi-megawatt wind turbine converter configurations suitable for off-shore applications, combining 3-L NPC PEBBs’. IEEE Energy Conversion Congress and Exposition (ECCE), Denver, CO, USA, September 2013, pp. 2635–2640.
42. 42)
  - 6. Alepuz, S., Calle, A., Monge, S.B., et al: ‘Use of stored energy in PMSG rotor inertia for low-voltage ride-through in back-to-back NPC converter-based wind power systems’, IEEE Trans. Ind. Electron., 2013, 60, (5), pp. 1787–1796 (doi: 10.1109/TIE.2012.2190954).
43. 43)
  - 69. Dai, J., Xu, D., Wu, B., et al: ‘Unified DC-link current control for low-voltage ride-through in current-source-converter-based wind energy conversion systems’, IEEE Trans. Power Electron., 2011, 26, (1), pp. 288–297 (doi: 10.1109/TPEL.2010.2059377).
44. 44)
  - 6. Wang, H., Liserre, M., Blaabjerg, F.: ‘Toward reliable power electronics: challenges, design tools, and opportunities’, IEEE Ind. Electron. Mag., 2013, 7, (2), pp. 17–26 (doi: 10.1109/MIE.2013.2252958).
45. 45)
  - 9. Levi, E.: ‘Multiphase electric machines for variable-speed applications’, IEEE Trans. Ind. Electron., 2008, 55, (5), pp. 1893–1909 (doi: 10.1109/TIE.2008.918488).
46. 46)
  - 5. Buja, G.S., Kazmierkowski, M.P.: ‘Direct torque control of PWM inverter-fed AC motors – a survey’, IEEE Trans. Ind. Electron., 2004, 51, (4), pp. 744–757 (doi: 10.1109/TIE.2004.831717).
47. 47)
  - 75. Snitchler, G., Gamble, B., King, C., et al: ‘10 MW class superconductor wind turbine generators’, IEEE Trans. Appl. Supercond., 2011, 21, (3), pp. 1089–1092 (doi: 10.1109/TASC.2010.2100341).
48. 48)
  - 65. Yaramasu, V., Wu, B.: ‘Three-level boost converter based medium voltage megawatt PMSG wind energy conversion systems’. IEEE Energy Conversion Congress and Exposition (ECCE), Phoenix, AZ, USA, September 2011, pp. 561–567.
49. 49)
  - 8. Yaramasu, V., Bin, W.: ‘Predictive control of a three-level boost converter and an NPC inverter for high-power PMSG-based medium voltage wind energy conversion systems’, IEEE Trans. Power Electron., 2014, 29, (10), pp. 5308–5322 (doi: 10.1109/TPEL.2013.2292068).
50. 50)
  - 26. Veilleux, E., Lehn, P.W.: ‘Interconnection of direct-drive wind turbines using a series-connected DC grid’, IEEE Trans. Sustain. Energy, 2014, 5, (1), pp. 139–147 (doi: 10.1109/TSTE.2013.2276616).
51. 51)
  - 32. Song, S.-H., l Kang, S., un Hahm, N.: ‘Implementation and control of grid connected AC–DC–AC power converter for variable speed wind energy conversion system’. IEEE Applied Power Electronics Conf. Exposition (APEC), Miami Beach, FL, USA, February 2003, vol. 1, pp. 154–158.
52. 52)
  - 3. Casadei, D., Profumo, F., Serra, G., et al: ‘FOC and DTC: two viable schemes for induction motors torque control’, IEEE Trans. Power Electron., 2002, 17, (5), pp. 779–787 (doi: 10.1109/TPEL.2002.802183).
53. 53)
  - 2. Polinder, H., Ferreira, J.A., Jensen, B.B., et al: ‘Trends in wind turbine generator systems’, IEEE J. Emerging Sel. Top. Power Electron., 2013, 1, (3), pp. 174–185 (doi: 10.1109/JESTPE.2013.2280428).
54. 54)
  - 17. Ibrahim, R.A., Hamad, M.S., Dessouky, Y., et al: ‘A review on recent low voltage ride-through solutions for PMSG wind turbine’. IEEE Int. Symp. on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Sorrento, Italy, June 2012, pp. 265–270.
55. 55)
  - 16. Rodriguez, J., Bernet, S., Steimer, P.K., Lizama, I.E.: ‘A survey on neutral-point-clamped inverters’, IEEE Trans. Ind. Electron., 2010, 57, pp. 2219–2230 (doi: 10.1109/TIE.2009.2032430).
56. 56)
  - 77. Narimani, M., Wu, B., Cheng, Z., et al: ‘A new nested neutral point-clamped (NNPC) converter for medium-voltage (MV) power conversion’, IEEE Trans. Power Electron., 2014, 29, (12), pp. 6375–6382 (doi: 10.1109/TPEL.2014.2306191).
57. 57)
  - 34. Xin, X., Hui, L.: ‘Research on multiple boost converter based on MW-level wind energy conversion system’. Int. Conf. on Electrical Machines and Systems (ICEMS), Nanjing, China, September 2005, vol. 2, pp. 1046–1049.
58. 58)
  - 29. Mikhail, A.S., Cousineau, K.L., Howes, L.H., et al: ‘Variable speed distributed drive train wind turbine system’. United States Patent US 7,042,110 B2, May 2006.
59. 59)
  - 73. Popat, M., Wu, B., Zargari, N.R.: ‘Fault ride-through capability of cascaded current-source converter-based offshore wind farm’, IEEE Trans. Sustain. Energy, 2013, 4, (2), pp. 314–323 (doi: 10.1109/TSTE.2012.2223246).
60. 60)
  - 52. Gnanarathna, U., Chaudhary, S., Gole, A., et al: ‘Modular multi-level converter based HVDC system for grid connection of offshore wind power plant’. IET Int. Conf. on AC and DC Power Transmission (ACDC), October 2010, pp. 1–5.
61. 61)
  - 14. Liserre, M., Cardenas, R., Molinas, M., Rodriguez, J.: ‘Overview of multi-MW wind turbines and wind parks’, IEEE Trans. Ind. Electron., 2011, 58, pp. 1081–1095 (doi: 10.1109/TIE.2010.2103910).
62. 62)
  - 3. Meyer, C., Hoeing, M., Peterson, A., et al: ‘Control and design of DC grids for offshore wind farms’, IEEE Trans. Ind. Appl., 2007, 43, (6), pp. 1475–1482 (doi: 10.1109/TIA.2007.908182).
63. 63)
  - 61. Debnath, S., Jiangchao, Q., Bahrani, B., et al: ‘Operation, control, and applications of the modular multilevel converter: a review’, IEEE Trans. Power Electron., 2015, 30, pp. 37–53 (doi: 10.1109/TPEL.2014.2309937).
64. 64)
  - 13. Wu, B., Lang, Y., Zargari, N., et al: ‘Power conversion and control of wind energy systems’, ser. IEEE Press Series on Power Engineering (Wiley-IEEE Press, Hoboken, NJ, 2011, 1st edn.).
65. 65)
  - 21. Preindl, M., Bolognani, S.: ‘Model predictive torque control with finite control set for PMSM drive systems, PART 1: maximum torque per ampere operation’, IEEE Trans. Ind. Inf., 2013, 9, (4), pp. 1912–1921 (doi: 10.1109/TII.2012.2227265).
66. 66)
  - 9. Conroy, J.F., Watson, R.: ‘Low-voltage ride-through of a full converter wind turbine with permanent magnet generator’, IET Renew. Power Gener., 2007, 1, (3), pp. 182–189 (doi: 10.1049/iet-rpg:20070033).
67. 67)
  - 14. Tsili, M., Papathanassiou, S.: ‘A review of grid code technical requirements for wind farms’, IET Renew. Power Gener., 2009, 3, (3), pp. 308–332 (doi: 10.1049/iet-rpg.2008.0070).
68. 68)
  - 33. Xia, Y., Ahmed, K., Williams, B.: ‘Different torque ripple reduction methods for wind energy conversion systems using diode rectifier and boost converter’. IEEE Int. Electric Machines and Drives Conf. (IEMDC), Niagara Falls, ON, Canada, May 2011, pp. 729–734.
69. 69)
  - 60. Morimoto, S., Hatanaka, K., Tong, Y., et al: ‘Servo drive system and control characteristics of salient pole permanent magnet synchronous motor’, IEEE Trans. Ind. Appl., 1993, 29, (2), pp. 338–343 (doi: 10.1109/28.216541).
70. 70)
  - 6. Perez, M.A., Bernet, S., Rodriguez, J., Kouro, S., Lizana, R.: ‘Circuit topologies, modeling, control schemes, and applications of modular multilevel converters’, IEEE Trans. Power Electron., 2015, 30, pp. 4–17 (doi: 10.1109/TPEL.2014.2310127).
71. 71)
  - 27. Parker, M., Ng, C., Ran, L.: ‘Fault-tolerant control for a modular generator-converter scheme for direct-drive wind turbines’, IEEE Trans. Ind. Electron., 2011, 58, (1), pp. 305–315 (doi: 10.1109/TIE.2010.2045318).
72. 72)
  - 38. Faulstich, A., Stinke, J., Wittwer, F.: ‘Medium voltage converter for permanent magnet wind power generators up to 5 MW’. European Conf. on Power Electronics and Applications (EPE), Dresden, Germany, 2005, p. 9.
73. 73)
  - 5. Blaabjerg, F., Ma, K.: ‘Future on power electronics for wind turbine systems’, IEEE J. Emerging Sel. Top. Power Electron., 2013, 1, (3), pp. 139–152 (doi: 10.1109/JESTPE.2013.2275978).
74. 74)
  - 36. Hojabri, H., Mokhtari, H., Chang, L.: ‘Reactive power control of permanent-magnet synchronous wind generator with matrix converter’, IEEE Trans. Power Deliv., 2013, 28, (2), pp. 575–584 (doi: 10.1109/TPWRD.2012.2229721).
75. 75)
  - 67. Hu, J., Zhu, Z.: ‘Investigation on switching patterns of direct power control strategies for grid-connected DC–AC converters based on power variation rates’, IEEE Trans. Power Electron., 2011, 26, (12), pp. 3582–3598 (doi: 10.1109/TPEL.2011.2164812).
76. 76)
  - 2. Hui, Z., Tolbert, L.M.: ‘Efficiency impact of silicon carbide power electronics for modern wind turbine full scale frequency converter’, IEEE Trans. Ind. Electron, 2011, 58, 1, pp. 21–28 (doi: 10.1109/TIE.2010.2048292).
77. 77)
  - 7. Lundberg, S.: ‘Evaluation of wind farm layouts’, Eur. Power Electron. Drives Assoc. J., 2006, 16, (1), p. 14.
78. 78)
  - 48. Anaya-Lara, O., Campos-Gaona, D., Moreno-Goytia, E., et al: ‘Offshore wind energy generation: control, protection, and integration to electrical systems’ (John Wiley & Sons, Inc., Chichester, UK, 2014, 1st edn.).
79. 79)
  - 42. Debnath, S., Saeedifard, M.: ‘A new hybrid modular multilevel converter for grid connection of large wind turbines’, IEEE Trans. Sustain. Energy, 2013, 4, (4), pp. 1051–1064 (doi: 10.1109/TSTE.2013.2266280).
80. 80)
  - 47. Yaramasu, V., Wu, B., Rivera, M., et al: ‘A new power conversion system for megawatt PMSG wind turbines using four-level converters and a simple control scheme based on two-step model predictive strategy – part I: modeling and theoretical analysis’, IEEE J. Emerg. Sel. Top. Power Electron., 2014, 2, (1), pp. 3–13 (doi: 10.1109/JESTPE.2013.2294920).
81. 81)
  - 9. Niu, F., Wang, B., Babel, A.S., et al: ‘Comparative evaluation of direct torque control strategies for permanent magnet synchronous machines’, IEEE Trans. Power Electron., 2016, 31, (2), pp. 1408–1424 (doi: 10.1109/TPEL.2015.2421321).

Login

Not registered yet?

Share

Tools

Login to add to favourites

Key

PMSG-based wind energy conversion systems: survey on power converters and controls

References

Related content