Virtual reference feedback tuning (VRFT) is a data-driven control method that optimises the response of a closed-loop system to reference tracking at the expense of a not optimised response to disturbance rejection. This work presents the application of VRFT to two cascade control structures usually considered in the control literature to improve the overall closed-loop performance for single-input systems. For both structures, the authors derive the optimal and practical filter formulation to cope with the case where the controller to be designed is underparameterised. Also, in the case where the internal controller is at the feedback path, they derive a new approach that uses data from a single experiment and considers a unique reference model. Simulation examples illustrate the importance of using the VRFT filter, along with the performance improvements obtained from both cascade loops in terms of reference tracking and disturbance rejection.

References

1. 1)
  - 8. Cavanini, L., Cimini, G., Ippoliti, G., et al: ‘Model predictive control for pre-compensated voltage mode controlled DC–DC converters’, IET Control Theory Applic., 2017, 11, (15), pp. 2514–2520.
2. 2)
  - 33. Formentin, S., Piga, D., Tóth, R., et al: ‘Direct learning of LPV controllers from data’, Automatica, 2016, 65, pp. 98–110.
3. 3)
  - 25. Gançalves da Silva, G.R., Bazanella, A.S., Campestrini, L.: ‘One-shot data-driven controller certification’, ISA Trans., 2020, 99, pp. 361–373.
4. 4)
  - 15. Jin, Q., Liu, Q.: ‘Multi-loop PI/PID controllers design for disturbance rejection based on non-parametric effective model and non-convex optimisation’, IET Control Theory Applic., 2014, 8, (15), pp. 1499–1512.
5. 5)
  - 13. Raja, G.L., Ali, A.: ‘Smith predictor based parallel cascade control strategy for unstable and integrating processes with large time delay’, J. Process. Control, 2017, 52, pp. 57–65.
6. 6)
  - 17. Hu, N.T., Tsai, J.S.H., Guo, S.M., et al: ‘Low-order multi-rate linear time-invariant decentralized trackers using the new observer-based sub-optimal method for unknown sampled-data nonlinear time-delay system with closed-loop decoupling’, Opt. Control Appl. Methods, 2010, 32, (4), pp. 433–475.
7. 7)
  - 2. Mohanty, P.R., Panda, A.K.: ‘Fixed-frequency sliding-mode control scheme based on current control manifold for improved dynamic performance of boost PFC converter’, IEEE J. Emerg. Sel. Top. Power Electron., 2017, 5, (1), pp. 576–586.
8. 8)
  - 16. Tsai, J.S.H., Hu, N.T., Yang, P.C., et al: ‘Modeling of decentralized linear observer and tracker for a class of unknown interconnected large-scale sampled-data nonlinear systems with closed-loop decoupling property’, Comput. Math. Appl., 2010, 60, (3), pp. 541–562.
9. 9)
  - 20. Huff, D.D., Campestrini, L., Gançalves da Silva, G.R., et al: ‘Data-driven control design by prediction error identification for multivariable systems’, J. Control Autom. Electr. Syst., 2019, 30, (4), pp. 465–478.
10. 10)
  - 14. Zhao, S., Dimirovski, G.M., Ma, R.: ‘Robust H∞ control for non-minimum phase switched cascade systems with time delay’, Asian J. Control, 2014, 17, (5), pp. 1590–1599.
11. 11)
  - 21. Campi, M.C., Lecchini, A., Savaresi, S.M.: ‘Virtual reference feedback tuning: a direct method for the design of feedback controllers’, Automatica, 2002, 38, (8), pp. 1337–1346.
12. 12)
  - 19. Karimi, A., Miskovic, L., Bonvin, D.: ‘Iterative correlation-based controller tuning’, Int. J. Adapt. Control Signal Process., 2004, 18, pp. 645–664.
13. 13)
  - 35. Rojas, J.D., Morilla, F., Vilanova, R.: ‘Multivariable PI control for a boiler plant benchmark using the virtual reference feedback tuning’, IFAC Proc. Vol., 2012, 45, (3), pp. 376–381.
14. 14)
  - 28. Lecchini, A., Campi, M.C., Savaresi, S.M.: ‘Virtual reference feedback tuning for two degree of freedom controllers’, Int. J. Adapt. Control Signal Process., 2002, 16, (5), pp. 355–371.
15. 15)
  - 32. Campestrini, L., Eckhard, D., Chía, L.A., et al: ‘Unbiased MIMO VRFT with application to process control’, J. Process. Control, 2016, 39, pp. 35–49.
16. 16)
  - 18. Hjalmarsson, H., Gevers, M., Gunnarsson, S., et al: ‘Iterative feedback tuning: theory and applications’, IEEE Control Syst., 18, 1998, pp. 26–41.
17. 17)
  - 7. Zhao, N., Wang, G., Xu, D., et al: ‘Inverter power control based on DC-link voltage regulation for IPMSM drives without electrolytic capacitors’, IEEE Trans. Power Electron., 2018, 33, (1), pp. 558–571.
18. 18)
  - 38. Markkassery, S., Saradagi, A., Mahindrakar, A.D.N.L., et al: ‘Modelling, design and control of non-isolated single-input multi-output zeta-buck-boost converter’, IEEE Trans. Ind. Appl., 2020, 56, pp. 3904–3918.
19. 19)
  - 10. Mac, T.T., Copot, C., Keyser, R.D., et al: ‘The development of an autonomous navigation system with optimal control of an UAV in partly unknown indoor environment’, Mechatronics, 2018, 49, pp. 187–196.
20. 20)
  - 40. Gançalves da Silva, G.R., Bazanella, A.S., Campestrini, L.: ‘On the choice of an appropriate reference model for control of multivariable plants’, IEEE Trans. Control Syst. Technol, 2018, 27, (5), pp. 1937–1949.
21. 21)
  - 22. Campi, M.C., Savaresi, S.M.: ‘Direct nonlinear control design: the virtual reference feedback tuning (VRFT) approach’, IEEE Trans. Autom. Control, 2006, 51, (1), pp. 14–27.
22. 22)
  - 27. Jeng, J.C., Yeh, C.H.: ‘Coordinated control design for a PEMFC power system using adaptive VRFT method’, J. Taiwan Inst. Chem. Eng., 2017, 73, pp. 102–111.
23. 23)
  - 36. Aamir, M., Mekhilef, S.: ‘An online transformerless uninterruptible power supply (UPS) system with a smaller battery bank for low-power applications’, IEEE Trans. Power Electron., 2017, 32, (1), pp. 233–247.
24. 24)
  - 1. Wang, M., Ren, X., Chen, Q.: ‘Cascade optimal control for tracking and synchronization of a multimotor driving system’, IEEE Trans. Control Syst. Technol, 2019, 27, (3), pp. 1376–1384.
25. 25)
  - 3. Zachi, A.R.L., Correia, C.A.M., Filho, J.A., et al: ‘Robust disturbance rejection controller for systems with uncertain parameters’, IET Control Theory Applic., 2019, 13, (13), pp. 1995–2007.
26. 26)
  - 11. Trapiello, C., Puig, V., Morcego, B.: ‘Position-heading quadrotor control using LPV techniques’, IET Control Theory Applic., 2019, 13, (6), pp. 783–794.
27. 27)
  - 29. Zheng, Y., Zhang, G.: ‘Data-driven two degrees of freedom controller design for MIMO system via VRFT approach’. 2020 Chinese Control And Decision Conf. (CCDC), Hefei, China, 2020, pp. 981–986.
28. 28)
  - 23. Bazanella, A.S., Campestrini, L., Eckhard, D.: ‘Data-driven controller design: the H2 approach’ (Springer, Netherlands, 2011).
29. 29)
  - 12. Campos-Rodríquez, A., García-Sandoval, J.P., González-Álvarez, V., et al: ‘Hybrid cascade control for a class of nonlinear dynamical systems’, J. Process. Control, 2019, 76, pp. 141–154.
30. 30)
  - 30. Remes, C.L., Gomes, R.B., Flores, J.V., et al: ‘Virtual reference feedback tuning applied to DC–DC converters’, IEEE Trans. Ind. Electron., 2021, 68, (1), pp. 544–552.
31. 31)
  - 6. Zhang, H., Li, H., Zhou, Y., et al: ‘Cascaded proportional control with algebraic estimators for pfc ac/dc converters’, IEEE Trans. Power Electron., 2019, 34, (12), pp. 12504–12512.
32. 32)
  - 26. Corleta, A., Lorenzini, C., Flores, J.V., et al: ‘Data-driven control design applied to uninterruptible power supplies’. IEEE Conf. on Control Applications (CCA) part Multi-Conf. on Systems and Control, Buenos Aires, Argentina, 2016, pp. 1312–1317.
33. 33)
  - 37. Kassick, E.V.: ‘Deriving the canonical equivalent circuit for small signal & low frequency ac model for the sepic and zeta pwm dc-dc converters with two-port network (quadripoles) circuit analysis technique’, Eletrôn. Potên., 2011, 16, (4), pp. 376–382.
34. 34)
  - 39. Cheng, Y., Chen, Z., Sun, M., et al: ‘Cascade active disturbance rejection control of a high-purity distillation column with measurement noise’, Ind. Eng. Chem. Res., 2018, 57, (13), pp. 4623–4631.
35. 35)
  - 5. Liu, H., Zhao, W., Hong, S., et al: ‘Robust backstepping-based trajectory tracking control for quadrotors with time delays’, IET Control Theory Applic., 2019, 13, (12), pp. 1945–1954.
36. 36)
  - 4. Padhan, D.G., Majhi, S.: ‘Modified smith predictor based cascade control of unstable time delay processes’, ISA Trans., 2012, 51, (1), pp. 95–104.
37. 37)
  - 9. Razi, R., Monfared, M.: ‘Multi-loop control of stand-alone inverters with minimum number of sensors’, IET Power Electron., 2016, 9, (12), pp. 2425–2433.
38. 38)
  - 34. Formentin, S., Filippi, P.D., Corno, M., et al: ‘Data-driven design of braking control systems’, IEEE Trans. Control Syst. Technol., 2013, 21, (1), pp. 186–193.
39. 39)
  - 31. Formentin, S., Savaresi, S.M.: ‘Noniterative data-driven design of multivariable controllers’. IEEE Conf. on Decision and Control and European Control Conf., Orlando, FL, USA, 2011, pp. 5106–5111.
40. 40)
  - 24. Campestrini, L., Eckhard, D., Gevers, M., et al: ‘Virtual reference feedback tuning for non minimum phase plants’, Automatica, 2011, 47, (8), pp. 1778–1784.

Virtual reference feedback tuning applied to cascade control

References

Related content