Accepting performance degradation analysis of switched systems
- Author(s): Hong Li 1 ; Hao Yang 1 ; Bin Jiang 1
-
-
View affiliations
-
Affiliations:
1:
College of Automation Engineering , Nanjing University of Aeronautics and Astronautics , 29 YuDao Street, Nanjing , People's Republic of China
-
Affiliations:
1:
College of Automation Engineering , Nanjing University of Aeronautics and Astronautics , 29 YuDao Street, Nanjing , People's Republic of China
- Source:
Volume 11, Issue 17,
24
November
2017,
p.
3038 – 3046
DOI: 10.1049/iet-cta.2017.0038 , Print ISSN 1751-8644, Online ISSN 1751-8652
© The Institution of Engineering and Technology
Received
21/03/2017,
Accepted
30/08/2017,
Revised
26/07/2017,
Published
30/08/2017
A new concept of accepting performance degradation, which evaluated by converging rate and stability, is proposed for switched systems. The relation between the converging rate of the whole switched system and the eigenvalues of each subsystem is established, based on which the accepting performance degradation is evaluated quantitatively in the presence of process and actuator faults. The derived results are further verified by the simulation of an application to the highly manoeuvrable technology vehicle model.
Inspec keywords: switching systems (control)
Other keywords: vehicle model; performance degradation analysis; switched systems
Subjects: Time-varying control systems
References
-
-
1)
-
2. Zhang, Y.M., Jiang, J.: ‘Bibliographical review on reconfigurable fault-tolerant control systems’, Annu. Rev. Control, 2008, 32, pp. 229–252.
-
-
2)
-
21. Zheng, X.Z.: ‘Spectral radius inequalities of nonnegative matrix’, J. Xianyang Normal Univ., 2011, 26, (2), pp. 4–6.
-
-
3)
-
1. Blanke, M., Kinnaert, M., Lunze, J., et al.: ‘Diagnosis and fault tolerant control’ (Springer-Verlag, Berlin, 2006, 2nd edn.).
-
-
4)
-
3. Jiang, J., Zhang, Y.M.: ‘Accepting performance degradation in fault-tolerant control system design’, IEEE Trans. Control Syst. Technol., 2006, 14, (2), pp. 284–292.
-
-
5)
-
8. Wu, L., Shi, P., Su, X.: ‘Sliding mode control of uncertain parameter-switching hybrid systems’ (John Wiley and Sons, London, 2014).
-
-
6)
-
6. Zhang, Y.M., Jiang, J.: ‘Fault tolerant control system design with explicit consideration of performance degradation’, IEEE Trans. Aerosp. Electron. Syst., 2003, 39, (3), pp. 838–848.
-
-
7)
-
14. Kang, Y., Zhai, D.H., Liu, G.P., et al.: ‘Stability analysis of a class of hybrid stochastic retarded systems under asynchronous switching’, IEEE Trans. Autom. Control, 2014, 59, (6), pp. 1511–1523.
-
-
8)
-
17. Jiang, B., Yang, H., Cocquempot, V.: ‘Results and perspectives on fault tolerant control design of hybrid systems’, Int. J. Control, 2011, 84, (2), pp. 396–411.
-
-
9)
-
22. Callier, F.M., Desoer, C.A.: ‘Linear system theory’ (Springer-Verlag, New York, 1991).
-
-
10)
-
23. Hespanba, J.P., Morse, A.S.: ‘Stability of switched systems with average dwell time’. Proc. of 38th IEEE Conf. Decision and Control, Phoenix, AZ, 1999, pp. 2655–2660.
-
-
11)
-
4. Yang, H., Jiang, B., Staroswiecki, M.: ‘Observer-based fault tolerant control for a class of switched nonlinear systems’, IET Control Theory Appl., 2007, 1, pp. 1523–1532.
-
-
12)
-
15. Kang, Y., Zhai, D.H., Liu, G.P., et al.: ‘On input-to-state stability of switched stochastic nonlinear systems under extended asynchronous switching’, IEEE Trans. Cybern., 2015, 45, (5), pp. 1092–1105.
-
-
13)
-
10. Zhao, J., Hill, D.J.: ‘On stability, L2 gain and H∞ control for switched systems’, Automatica, 2008, 44, (5), pp. 1220–1232.
-
-
14)
-
24. Hartmann, G.L., Barrett, M.F., Greene, C.S.: ‘Control design for an unstable vehicle’ (NASA CR-170393, 1979).
-
-
15)
-
16. Yang, H., Jiang, B., Cocquempot, V.: ‘Fault tolerant control design for hybrid systems’ (Springer-Verlag, Berlin Heidelberg, 2010).
-
-
16)
-
11. Xiang, Z.R., Wang, R.H.: ‘Robust control for uncertain switched non-linear systems with time delay under asynchronous switching’, IET Control Theory Appl., 2009, 3, (8), pp. 1041–1050.
-
-
17)
-
18. Hou, Y.Z., Wang, Q., Dong, C.Y.: ‘Gain scheduled control: switched polytopic system approach’, J. Guid. Control Dyn., 2011, 34, (2), pp. 396–403.
-
-
18)
-
19. Hou, Y.Z., Dong, C.Y., Wang, Q.: ‘Stability analysis for switched linear systems with locally overlapped switching law’, J. Guid. Control Dyn., 2010, 33, (2), pp. 623–629.
-
-
19)
-
20. Xu, L., Wang, Q., Li, W., et al.: ‘Stability analysis and stabilisation of full envelope networked flight control systems: switched system approach’, IET Control Theory Appl., 2012, 6, (2), pp. 286–296.
-
-
20)
-
9. Yang, H., Jiang, B., Cocquempot, V.: ‘Stabilization of switched nonlinear systems with unstable modes’ (Springer International Publishing, Switzerland, 2014).
-
-
21)
-
7. Liberzon, D., Morse, A.S.: ‘Basic problems in stability and design of switched systems’, IEEE Control Syst. Mag., 1999, 19, (5), pp. 59–70.
-
-
22)
-
13. Zhang, L., Gao, H.: ‘Asynchronously switched control of switched linear systems with average dwell time’, Automatica, 2010, 46, (5), pp. 953–958.
-
-
23)
-
5. Yang, H., Jiang, B., Cocquempot, V.: ‘A fault tolerant control framework for periodic switched non-linear systems’, Int. J. Control, 2009, 82, (1), pp. 117–129.
-
-
24)
-
12. Lin, H., Antsaklis, P.J.: ‘Stability and stabilizability of switched linear systems: a survey of recent results’, IEEE Trans. Autom. Control, 2009, 54, (2), pp. 308–322.
-
-
1)
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-cta.2017.0038
Related content
content/journals/10.1049/iet-cta.2017.0038
pub_keyword,iet_inspecKeyword,pub_concept
6
6
