Your browser does not support JavaScript!
http://iet.metastore.ingenta.com
1887

access icon free Ultra-low power micro Wi-Fi scattering communication device

A Wi-Fi scatter communication method based on microcontroller unit (MCU) is proposed, and an ultra-low power micro Wi-Fi scatter communication device μWi-Fi is designed and implemented. First, according to the characteristics of the microcontroller, the software virtual modulation method and the serial communication port direct memory access (DMA) transmission method is proposed to realise Wi-Fi scattering communication. Then the MCU + exclusive OR (XOR) baseband architecture is proposed to further reduce the main frequency of the microcontroller and the system power consumption. The communication test and power consumption measurement results show that μWi-Fi can generate signals conforming to the IEEE802.11b standard, which can be received and forwarded by universal Wi-Fi routers. Its effective communication distance reaches 15 m, its communication peak current reaches 720  μA, and its standby current reaches 390 nA. Compared with traditional internet of things (IOTs) Wi-Fi devices, μWi-Fi can not only reduce the power consumption of Wi-Fi communication by 2–3 orders but also has a simple composition and low cost, which is very helpful for the rapid development of Wi-Fi IoT products.

References

    1. 1)
      • 3. Bharadia, D., Joshi, K.R., Kotaru, M., et al: ‘Backfi: high throughput WiFi backscatter’. ACM Conf. on SIGCOMM'15, London, UK, 2015, pp. 283296.
    2. 2)
      • 6. Gollakota, S., Gollakota, S., Gollakota, S., et al: ‘Lora backscatter: enabling the vision of ubiquitous connectivity’, Proc. ACM Interact. Mobile Wearable Ubiquit. Technol., 2017, 1, (3), p. 105.
    3. 3)
      • 7. Talla, V., Kellogg, B., Gollakota, S., et al: ‘Battery-free cellphone’, Proc. ACM Interact. Mobile Wearable Ubiquit. Technol., 2017, 1, (2), p. 25.
    4. 4)
      • 2. Want, R.: ‘An Introduction to RFID technology’, IEEE Pervasive Comput., 2006, 5, (1), pp. 2533.
    5. 5)
      • 1. Ahmed, N., Rahman, H., Hussain, M.I.: ‘A comparison of 802.11ah and 802.15.4 for IoT’, Ict Express, 2016, 2, (3), pp. 100102.
    6. 6)
      • 5. Kellogg, B., Talla, V., Smith, J.R., et al: ‘Passive Wi-Fi: bringing low power to Wi-Fi transmissions’, Getmobile Mobile Comput. Commun., 2017, 20, (3), pp. 3841.
    7. 7)
      • 10. IEEE, IEEE Std 802.11™-2012 (Revision of IEEE Std 802.11-2007) Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications, New York: IEEE Computer Society, 2012.
    8. 8)
      • 4. Kellogg, B., Parks, A., Gollakota, S., et al: ‘Wi-fi backscatter: internet connectivity for RF-powered devices’. ACM Conf. SIGCOMM, Chicago, Illinois, USA, 2015, pp. 607618.
    9. 9)
      • 11. Wang, H., Zhi-Yong, L., Yang, L.: ‘Method for interference suppression based on wavelet packet transform in satellite DSSS communication system’, Syst. Eng. Electron., 2016, 38, pp. 14171422.
    10. 10)
      • 9. Katti, S., Katti, S., Katti, S., et al: ‘Hitchhike: practical backscatter using commodity WiFi’. ACM Conf. on Embedded Network Sensor Systems Cd-rom, New York, USA, 2016.
    11. 11)
      • 8. Chinaei, M.H., Sivaraman, V., Ostry, D.: ‘An experimental study of secret key generation for passive Wi-Fi wearable devices’. Int. Symp. a World of Wireless, Mobile and Multimedia Networks, Macau, China, 2017, pp. 19.
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-com.2018.6125
Loading

Related content

content/journals/10.1049/iet-com.2018.6125
pub_keyword,iet_inspecKeyword,pub_concept
6
6
Loading
This is a required field
Please enter a valid email address