Simulation-based method for optimum microfluidic sample dilution using weighted mix-split of droplets

Nilina Bera; Subhashis Majumder; Bhargab B. Bhattacharya

Simulation-based method for optimum microfluidic sample dilution using weighted mix-split of droplets

View Fulltext

Author(s): Nilina Bera ¹ ; Subhashis Majumder ¹ ; Bhargab B. Bhattacharya ²
- Affiliations: 1: Department of Computer Science and Engineering, Heritage Institute of Technology, Kolkata, West Bengal 700 107, India ;
  2: Advanced Computing and Microelectronics Unit, Indian Statistical Institute, Kolkata, West Bengal 700 108, India
Source: Volume 10, Issue 3, May 2016, p. 119 – 127
DOI: 10.1049/iet-cdt.2015.0091 , Print ISSN 1751-8601, Online ISSN 1751-861X

Received 13/06/2015, Accepted 30/09/2015, Revised 28/08/2015, Published 01/05/2016

Digital microfluidics has recently emerged as an effective technology in providing inexpensive but reliable solutions to various biomedical and healthcare applications. On-chip dilution of a fluid sample to achieve a desired concentration is an important problem in the context of droplet-based microfluidic systems. Existing dilution algorithms deploy a sequence of balanced mix-split steps, where two unit-volume droplets of different concentrations are mixed, followed by a balanced-split operation to obtain two equal-sized droplets. In this study, the authors study the problem of generating dilutions using a combination of (1 : 1) and (1:2) mix/split operations, called weighted dilution (WD), and present a layout architecture to implement such WD-steps. The authors also describe a simulation based method to find the optimal mix-split steps for generating a dilution under various criteria such as minimisation of waste, sample, or buffer droplets. The sequences can be stored in a look-up table a priori, and used later in real time for fast generation of actuation sequences. Compared with the balanced (1:1) model, the proposed WD scheme reduces the number of mix-split steps by around 22%, and the number of waste droplets, by 18%.

References

1. 1)
  - 12. Pollack, M.G., Shendorov, A.D., Fair, R.B.: ‘Electrowetting-based actuation of droplets for integrated microfluidics’, Lab Chip, 2002, 2, (1), pp. 96–101 (doi: 10.1039/b110474h).
2. 2)
  - 11. Paik, P., Pamula, V.K., Pollack, M.G., et al: ‘Electrowetting-based droplet mixers for microfluidic systems’, Lab Chip, 2003, 3, (1), pp. 28–33 (doi: 10.1039/b210825a).
3. 3)
  - 4. Han, Y.L., Yang, Y., Liu, S., et al: ‘Directed self-assembly of microscale hydrogels by electrostatic interaction’, Biofabrication, 2013, 5, (3), p. 035004 (doi: 10.1088/1758-5082/5/3/035004).
4. 4)
  - 17. Bera, N., Majumder, S., Bhattacharya, B.B.: ‘Dilution of samples using generalized mix-split steps on a digital microfluidic platform’. Event Proc. of Microfluidics and Lab-on-a-Chip India (SELECTBIO), Mumbai, India, January 2015.
5. 5)
  - 8. Chiang, T.W., Liu, C.H., Huang, J.D.: ‘Graph-based optimal reactant minimization for sample preparation on digital microfluidic biochips’. Int. Symp. on VLSI Design, Automation, and Test (VLSI-DAT), 2013, p. 14.
6. 6)
  - 13. Ren, H., Srinivasan, V., Fair, R.B.: ‘Design and testing of an interpolating mixing architecture for electro wetting-based droplet-on-chip chemical dilution’. Proc. Int. Conf. Solid-state Sensors, Actuators Microsystem (Tranducers), 2003, pp. 619–622.
7. 7)
  - 14. Theis, W., Urbanski, J.P., Thorsen, T., et al: ‘Abstraction layers for scalable microfluidic biocomputing’, Nat. Comput., 2008, 7, (2), pp. 255–275 (doi: 10.1007/s11047-006-9032-6).
8. 8)
  - 20. Ibrahim, M., Chakrabarty, K.: ‘Error recovery in digital microfluidics for personalized medicine’. Proc. IEEE/ACM DATE, 2015, pp. 247–252.
9. 9)
  - 6. Zhang, H., Cockrell, S.K., Kolawole, A.O., et al: ‘Isolation and analysis of rare norovirus recombinants from co-infected mice using drop-based microfluidics’, J. Virol. (JVI), 2015, 89, (15), pp. 7722–7734 (doi: 10.1128/JVI.01137-15).
10. 10)
  - 5. Hu, J., Wang, L., Li, F., et al: ‘Oligonucleotide-linked gold nanoparticle aggregates for enhanced sensitivity in lateral flow assays’, Lab Chip, 2013, 13, (22), pp. 4352–4357 (doi: 10.1039/c3lc50672j).
11. 11)
  - 10. Huang, J.D., Liu, C.H., Lin, H.S.: ‘Reactant and waste minimization in multitarget sample preparation on digital microfluidic biochips’, IEEE Trans. Comput.-Aided Des. Integr. Circuits Syst., 2013, 32, (10), pp. 1484–1494 (doi: 10.1109/TCAD.2013.2263035).
12. 12)
  - 19. Bera, N., Majumder, S., Bhattacharya, B.B.: ‘Analysis of concentration errors in sample dilution algorithms on a digital microfluidics biochip’. Proc. of the ICAA LNCS 8321, Kolkata, India, January 2014, pp. 89–100.
13. 13)
  - 16. Roy, S., Bhattacharya, B.B., Chakrabarty, K.: ‘Waste-aware dilution and mixing of biochemical samples with digital microfluidic biochips’. Proc. of the IEEE/ACM DATE, 2011, pp. 1059–1064.
14. 14)
  - 9. Huang, J.D., Liu, C.H., Chiang, T.W.: ‘Reactant minimization during sample preparation on digital microfluidic biochips using skewed mixing trees’. Proc. of IEEE/ACM ICCAD, 2012, pp. 377–384.
15. 15)
  - 18. Majumder, S., Bera, N., Bhattacharya, B.B.: ‘An optimum microfluidic sample dilution method using weighted mix-split of droplets’, Indian Patent Pending, Ref. No. – 882/KOL/2014, filed, August 2014.
16. 16)
  - 2. Han, Y.L., Wang, S., Zhang, X., et al: ‘Engineering physical microenvironment for stem cell based regenerative medicine’, Drug Discov. Today, 2014, 19, (6), pp. 763–773 (doi: 10.1016/j.drudis.2014.01.015).
17. 17)
  - 1. Han, Y.L., Wang, W., Hu, J., et al: ‘Benchtop fabrication of three-dimensional reconfigurable microfluidic devices from paper-polymer composite’, Lab Chip, 2013, 13, (24), pp. 4745–4754 (doi: 10.1039/c3lc50919b).
18. 18)
  - 15. Roy, S., Bhattacharya, B.B., Chakrabarty, K.: ‘Optimization of dilution and mixing of biochips’, IEEE Trans. Comput.-Aided Des. Integr. Circuits Syst., 2010, 29, (11), pp. 1696–1708 (doi: 10.1109/TCAD.2010.2061790).
19. 19)
  - 7. Chakrabarty, K., Xu, T.: ‘Digital microfluidic biochips: design automation and optimization’ (CRC Press, Boca Raton, FL, 2010).
20. 20)
  - 3. Han, Y.L., Hu, J., Genin, G.M., et al: ‘BioPen: direct writing of functional materials at the point of care’, Sci. Rep., 2014, 4.

Login

Not registered yet?

Share

Tools

Login to add to favourites

Key

Simulation-based method for optimum microfluidic sample dilution using weighted mix-split of droplets

References

Related content