© The Institution of Engineering and Technology
A 37 dBm power amplifier (PA) is designed on a 0.25 µm optical T-gate pseudomorphic high electron mobility transistor (pHEMT) technology. The design of this two-stage PA along with a step-by-step design procedure is presented in this paper. This methodology can be used for design of PA in different technologies and frequencies. The PA delivers 5 W output power over the frequency band of 13–19 GHz. It shows average power-added efficiency of 37% and large signal gain of 15 dB in measurements which is consistent with simulation results. The output power and efficiency of the realised amplifier reach maximums of 37.6 dBm and 45%, respectively. Considering output power, bandwidth, chip area and efficiency, this PA exhibits competitive performance compared to the reported PAs.
References
-
-
1)
-
4. Afsahi, A., Larson, L.E.: ‘Monolithic power-combining techniques for watt-Level 2.4 GHz CMOS power amplifiers for WLAN applications’, IEEE Trans. Microw. Theory Tech., 2013, 61, (3), pp. 1247–1260 (doi: 10.1109/TMTT.2013.2238245).
-
2)
-
2. Lin, C., et al: ‘A compact 6.5 W PHEMT MMIC power amplifier for Ku-band applications’, IEEE Microw. Wirel. Compon. Lett., 2007, 17, (2), pp. 154–156 (doi: 10.1109/LMWC.2006.890347).
-
3)
-
20. Freitag, R.G., Degenford, J.E., Boire, D.C., Driver, M.C., Wickstrom, R.A., Chang, C.D.: ‘Wideband 3 W amplifier employing cluster matching’, Microw. Millimeter-Wave Monolithic Circuits, 1983, 83, (1), pp. 62–66 (doi: 10.1109/MCS.1983.1151044).
-
4)
-
17. Kim, J.G., Park, H.M., Kim, J.Y., Jeon, S.I., Hong, S.: ‘A 2 W balanced power amplifier MMIC for Ku-band satellite communications’, Microw. Opt. Technol. Lett., 2004, 4, pp. 342–344 (doi: 10.1002/mop.20297).
-
5)
-
3. Brama, R., Larcher, L., Mazzanti, A., Svelto, F.: ‘A 30.5 dBm 48% PAE CMOS class-E PA with integrated Balun for RF applications’, IEEE J. Solid-State Circuits, 2008, 43, (8), pp. 1755–1762 (doi: 10.1109/JSSC.2008.925605).
-
6)
-
22. Florian, C., Paganelli, R.P., Lonac, J.A.: ‘12 W X-Band MMIC HPA and driver amplifiers in InGaP-GaAs HBT technology for space SAR T/R modules’, IEEE Trans. Microw. Theory Tech., 2012, 60, (6), pp. 1805–1816 (doi: 10.1109/TMTT.2012.2189234).
-
7)
-
1. Campbell, C., et al: ‘GaN takes the lead’, IEEE Microw. Mag., 13, (6), 2012, pp. 44–53 (doi: 10.1109/MMM.2012.2205829).
-
8)
-
Y.S. Noh ,
D.P. Chang ,
I.B. Yom
.
Ku-band power amplifier MMIC chipset with on-chip active gate bias circuit.
ETRI J.
,
3 ,
247 -
253
-
9)
-
33. Dechansiaud, A., Sommet, R., Reveyrand, T., Quere, R., Bouw, D., Chang, C., Camiade, M., Deborgies, F.: ‘Design of an integrated cascode cell for compact Ku-band power amplifiers’. European Microwave Integrated Circuits Conf. (EuMIC), Oct. 2012, pp. 711–714.
-
10)
-
21. Van Der Bent, G., De Hek, A.P., Bessemoulin, A., Van Vliet, F.E.: ‘Low-cost high-efficient 10 W X-band high-power amplifier’. IEEE Int. Conf. on Microwaves, Communications, Antennas and Electronics Systems, November 2009, pp. 1–11.
-
11)
-
34. Noh, Y.S., Chang, D.P., Yom, I.B.: ‘Ku-band high-power amplifier MMIC with on-chip gate biasing circuit’, Electron. Lett., 2009, 45, (15), pp. 794–795 (doi: 10.1049/el.2009.0251).
-
12)
-
I. Aoki ,
S.D. Kee ,
D.B. Rutledge ,
A. Hajimiri
.
Fully integrated CMOS power amplifier design using the distributed active-transformer architecture.
IEEE J. Solid-State Circuits
,
3 ,
371 -
383
-
13)
-
13. Fujii, K., Morkner, H.: ‘Single supply 1 W Ku-band power amplifier based on 0.25 μm E-mode PHEMT’. IEEE MTT-S Int. Microwave Symp. Digest, June 2006, pp. 1855–1858.
-
14)
-
19. Krauss, H.L., Bostian, C.W., Raab, F.H.: ‘Solid state radio engineering’ (Wiley, 1980), pp. 38–82.
-
15)
-
9. Bahl, I.: ‘Fundamentals of RF and microwave transistor amplifiers’ (Wiley, 2009), pp. 479–505.
-
16)
-
26. Yau, W., Schellenberg, J.M.: ‘An N-way broadband planar power combiner/divider’, Microw. J., 1986, 29, (11), pp. 147–151.
-
17)
-
28. Collin, R.E.: ‘Foundation for microwave engineer’ (McGraw-Hall, 2001), pp. 799–830.
-
18)
-
32. Florian, C., Cignani, R., Vannini, G., Comparini, M.C.: ‘A Ku band monolithic power amplifier for TT&C applications’. Proc. of European Microwave Conf., 2005, vol. 3, pp. 1623.
-
19)
-
23. Mori, K., et al: ‘An L-band high-efficiency and low-distortion power amplifier using HPF/LPF combined interstage matching circuit’, IEEE Trans. Microw. Theory Tech., 2000, 48, (12), pp. 2560–2566 (doi: 10.1109/22.899013).
-
20)
-
18. Vendelin, G.D., Pavio, A.M., Rohde, U.L.: ‘Microwave circuit design using linear and nonlinear techniques’ (Wiley, 2005).
-
21)
-
N. Nagai ,
E. Mackawa ,
K. Ono
.
New N-way hybrid power dividers.
IEEE Trans. Microw. Theory Tech.
,
1008 -
1012
-
22)
-
10. Cripps, S.C.: ‘RF power amplifiers for wireless communications’ (Artech House, 2006), pp. 1–15.
-
23)
-
7. Florian, C., Cignani, R., Santarelli, A., Filicori, F.: ‘Design of 40 W AlGaN/GaN MMIC high power amplifiers for C -band SAR applications’, IEEE Trans. Microw. Theory Tech., 2013, 61, (12), pp. 4492–4504 (doi: 10.1109/TMTT.2013.2286109).
-
24)
-
M.L. Edwards ,
J.H. Sinsky
.
A new criterion for linear 2-port stability using geometrically derived parameters.
IEEE Trans. Microw. Theory Tech.
,
12 ,
2303 -
2311
-
25)
-
16. Lin, C.H., et al: ‘A fully matched Ku-band 9 W PHEMT MMIC high power amplifier’. IEEE Compound Semiconductor Integrated Circuit Symp., Nov. 2006, pp. 165–168.
-
26)
-
30. Elad, D., Shaulsky, R., Mezhebovsky, B.: ‘A novel method for even odd parametric oscillation stability analysis of a microwave power amplifier’. IEEE MTT-S Int. Microw. Symp. Digest, 2006, pp. 1850–1854.
-
27)
-
2. Chowdhury, D., et al: ‘A single-chip highly linear 2.4 GHz 30 dBm power amplifier in 90 nm CMOS’. Technical Digest of IEEE ISSCC 2009, Feb. 2009, pp. 378–379.
-
28)
-
14. Zhang, Q., Brown, S.A.: ‘Fully monolithic 8 W Ku-band high power amplifier’. IEEE MTT-S Int. Microwave Symp. Digest, June 2004, pp. 1161–1164.
-
29)
-
5. Pengelly, R.S., Wood, S.M., Milligan, J.W., Sheppard, S.T., Pribble, W.L.: ‘A review of GaN on SiC highelectron-mobility power transistors and MMICs’, IEEE Trans. Microw. Theory Tech., 2012, 60, (6), pp. 1764–1783 (doi: 10.1109/TMTT.2012.2187535).
-
30)
-
25. Salegh, A.: ‘Computation of the frequency response of a class of symmetric N-way power dividers’, Bell Syst. Tech. J., 1980, 59, (8), pp. 1493–1512 (doi: 10.1002/j.1538-7305.1980.tb03376.x).
-
31)
-
8. de Hek, A.P.: ‘Design, Realization and Test of GaAs-based Monolithic Integrated X-band High-Power Amplifiers’, Doctoral dissertation, Technische Universiteit Eindhoven, July 2002.
-
32)
-
11. Marsh, S.: ‘Practical MMIC design’ (Artech House, 2006).
-
33)
-
27. Imbornone, J.F., Murphy, M.T., Donahue, R.S., Heaney, E.: ‘New insight into subharmonic oscillation mode of GaAs power amplifiers under severe output mismatch condition’, IEEE J. Solid-State Circuits, 1997, 32, (9), pp. 1319–1325 (doi: 10.1109/4.628734).
-
34)
-
31. Anakabe, A., Collantes, J.M., Portilla, J., Mons, S., Mallet, A.: ‘Detecting and avoiding odd-mode parametric oscillations in microwave power amplifiers’, Int. J. RF Microw. CAE, 2005, 15, (5), pp. 469–478 (doi: 10.1002/mmce.20112).
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-cds.2014.0134
Related content
content/journals/10.1049/iet-cds.2014.0134
pub_keyword,iet_inspecKeyword,pub_concept
6
6