© The Institution of Engineering and Technology
In this study, the frequency spectrum of a pulse for ultra wideband impulse radio systems is assumed to be the frequency response of a real valued causal rational infinite impulse response (IIR) filter. This pulse design problem is formulated as a functional inequality constrained optimisation problem. The objective of this optimisation problem is to minimise the sum of the total passband and stopband ripple energy of the pulse. Also, the optimisation problem is subject to the stability condition of the IIR filter as well as to the specifications defined on both the maximum passband and stopband ripple magnitudes and that on the maximum time domain ripple magnitude of the pulse. If the feasible set of the optimisation problem is nonempty, then the designed pulse is guaranteed to be satisfied the specifications suggested by the Federal Communications Commission. Computer numerical simulation results show that the energy compaction performance defined in the frequency domain of the authors’ designed pulse outperforms that of existing pulses. Since the frequency spectrum of the pulse is the same as the frequency response of the designed IIR filter, the pulse can be generated via an excitation of a simple circuit.
References


1)

1. Michael, L.B., Ghavami, M., Kohno, R.: ‘Multiple pulse generator for ultrawideband communication using Hermite polynomial based orthogonal pulses’. IEEE Conf. on Ultra Wideband Systems and Technologies, 2002, pp. 47–51.

2)

2. Krébesz, T., Kolumbán, G., Józsa, C.M.: ‘Ultrawideband impulse radio based on pulse compression technique’. Twentieth European Conf. on Digital Circuit Theory and Design, ECCTD, 2011, pp. 797–800.

3)

3. Krébesz, T., Józsa, C.M., Kolumbán, G.: ‘New carrier generation techniques and their influence on bit energy in UWB radio’. Twentieth European Conf. on Digital Circuit Theory and Design, ECCTD, 2011, pp. 801–804.

4)

4. Beaulieu, N.C., Hu, B.: ‘A novel pulse design algorithm for ultrawideband communications’. IEEE Global Telecommunications Conf., GLOBECOM, 2004, vol. 5, pp. 3220–3224.

5)

5. Zeng, D., Annamalai, A.Jr., Zaghloul, A.I.: ‘Pulse shaping filter design in UWB system’. IEEE Conf. on Ultra Wideband Systems and Technologies, 2003, pp. 66–70.

6)

6. Lu, G., Spasojevic, P., Greenstein, L.: ‘Antenna and pulse designs for meeting UWB spectrum density requirements’. IEEE Conf. on Ultra Wideband Systems and Technologies, 2003, pp. 162–166.

7)

7. Luo, X., Yang, L., Giannakis, G.B.: ‘Designing optimal pulseshapers for ultrawideband radios’. IEEE Conf. on Ultra Wideband Systems and Technologies, 2003, pp. 349–353.

8)

8. de Abreu, G.T.F., Kohno, R.: ‘Design of jitterrobust orthogonal pulses for UWB systems’. IEEE Global Telecommunications Conf., GLOBECOM, 2003, vol. 2, pp. 739–743.

9)

9. Gordillo, A.C., de Abreu, G.T.F., Kohno, R.: ‘Bandlimited frequency efficient orthogonal pulse shape modulation for UWB communications’. IEEE 8th Int. Symp. on Spread Spectrum Techniques and Applications, 2004, pp. 498–502.

10)

A novel ultrawideband pulse design algorithm

11)

11. Taha, A., Chugg, K.M.: ‘On designing the optimal template waveform for UWB impulse radio in the presence of multipath’. IEEE Conf. on Ultra Wideband Systems and Technologies, 2002, pp. 41–45.

12)

12. Lee, S., Lim, J.S., Oh, C., Park, C.G.: ‘A convex projections method for ultrawideband pulse shape design’. Seventh Int. Conf. on Advanced Communication Technology, ICACT, 2005, vol. 1, pp. 358–361.

13)

13. Parr, A.B., Cho, B.L., Ding, Z.: ‘A new UWB pulse generator for FCC spectral masks’. Fiftyseventh IEEE Semiannual Vehicular Technology Conf., 2003, vol. 3, pp. 1664–1666.

14)

14. Krzikalla, R., Weber, T., ter Haseborg, J.L.: ‘Interdigital microstrip filters as protection devices against ultrawideband pulses’. IEEE Int. Symp. on Electromagnetic Compatibility, EMC, 2003, vol. 2, pp. 1313–1316.

15)

Orthonormal pulses for high data rate communications in indoor UWB systems

16)

16. Matsuo, M., Kamada, M., Habuchi, H.: ‘Design of UWB pulses based on Bsplines’. IEEE Int. Symp. on Circuits and Systems, ISCAS, 2005, vol. 6, pp. 5425–5428.

17)

17. Gill, G.S.: ‘Ultrawideband radar using Fourier synthesized waveforms’, IEEE Trans. Electromagn. Compat., 1997, 39, (2), pp. 124–131 (doi: 10.1109/15.584934).

18)

18. Wu, X., Tian, Z., Davidson, T.N., Giannakis, G.B.: ‘Optimal waveform design for UWB radios’. IEEE Int. Conf. on Acoustics, Speech and Signal Processing, ICASSP, 2004, vol. IV, pp. 521–524.

19)

19. Jennings, L.S., Teo, K.L.: ‘A computational algorithm for functional inequality constrained optimization problems’, Automatica, 1990, 26, (2), pp. 371–375 (doi: 10.1016/00051098(90)90131Z).

20)

An improved weighted leastsquares design for variable fractional delay FIR filters
http://iet.metastore.ingenta.com/content/journals/10.1049/ietcds.2013.0396
Related content
content/journals/10.1049/ietcds.2013.0396
pub_keyword,iet_inspecKeyword,pub_concept
6
6