Your browser does not support JavaScript!
http://iet.metastore.ingenta.com
1887

access icon free Analytical model for energy recovery circuit of plasma display panel data driver integrated circuit

© The Institution of Engineering and Technology
Received 20/12/2011, Accepted 22/11/2012, Revised 14/11/2012, Published

An analytical model is proposed to analyse the energy recovery circuit (ERC) efficiency of plasma display panel (PDP) data driver integrated circuit (IC). The experimental measurements agree with the analysis results very well. The analysis results show that the ERC efficiency of PDP data driver IC is influenced by three factors: the value of charge time T ERC, the channel resistor R on and the capacitance of C L. The range of T ERC is restricted in actual PDP system. C L is determined by physical parameters of PDP panel, and its value is nearly changeless. Therefore the ERC efficiency of PDP data driver IC can be improved significantly by using superior DPLD (double-channel p-type lateral extended drain metal oxidesemi conductor) transistor that has smaller R on.

Inspec keywords: plasma displays; driver circuits; integrated circuits; MOSFET

Other keywords: analytical model; plasma display panel data driver integrated circuit; PDP data driver IC; PDP system; double-channel p-type lateral extended drain MOS transistor; energy recovery circuit; charge time; DPLD MOS transistor; ERC efficiency; channel resistor

Subjects: Insulated gate field effect transistors; Power electronics, supply and supervisory circuits; Display technology

References

    1. 1)
      • 11. Liu, C.-C., Hsu, H.-B., Lo, S.-T., Chen, C.-L.: ‘An energy-recovery sustaining driver with discharge current compensation for AC plasma display panel’, IEEE Trans. Ind. Electron., 2001, 48, (2), pp. 344–351 (doi: 10.1109/41.915413).
    2. 2)
      • 7. Kwak, S.: ‘A review of switch-mode sustain drivers with resonant networks for plasma display panels’, IEEE Trans. Ind. Electron., 2010, 57, (5), pp. 1624–1625 (doi: 10.1109/TIE.2009.2032199).
    3. 3)
      • 10. Han, S.-K., Moon, G.-W., Moon, G.-W.: ‘A resonant energy-recovery circuit for plasma display panel employing gas-discharge current compensation method’, IEEE Trans. Power Electron., 2005, 20, (1), pp. 209–217 (doi: 10.1109/TPEL.2004.839803).
    4. 4)
      • 16. Park, J.-K., Do, H.-D., Kwon, B.-H.: ‘Asymmetric current buildup sustainer for AC plasma display panel’, IEEE Trans. Ind. Electron., 2008, 55, (4), pp. 1863–1870 (doi: 10.1109/TIE.2007.909062).
    5. 5)
      • 17. Choi, B.-D.: ‘Enhancement of current driving capability in data driver ICs for plasma display panels’, IEEE Trans. Consum. Electron., 2009, 55, (3), pp. 992–997 (doi: 10.1109/TCE.2009.5278054).
    6. 6)
      • 9. Han, S.-K., Youn, M.-J.: ‘High performance and low cost single switch current fed energy-recovery circuit for AC plasma display panel’, IEEE Trans. Power Electron., 2007, 22, (2), pp. 338–345 (doi: 10.1109/TPEL.2006.890007).
    7. 7)
      • 8. Liu, C.-C., Chen, C.-L., Lee, K.-M.: ‘A novel energy-recovery sustaining driver for plasma display panel’, IEEE Trans. Ind. Electron., 2000, 47, (6), pp. 1271–1277 (doi: 10.1109/41.887955).
    8. 8)
      • 15. Meng, L.-G., Liang, Z.-H., Liu, C.-L.: ‘Energy recovery circuit with auxiliary power supply for AC plasma display panel’, IEEE Trans. Consum. Electron., 2007, 53, (2), pp. 765–768 (doi: 10.1109/TCE.2007.381757).
    9. 9)
      • 13. Kwak, S., Jung, J.-W., Lee, D.-M., Cho, T.-S.: ‘A new sustain driver with energy recovery circuit based on low-voltage components and low-voltage power supply for AC plasma display panel’, IEEE Trans. Consum. Electron., 2008, 54, (3), pp. 1321–1328 (doi: 10.1109/TCE.2008.4637623).
    10. 10)
      • 4. Na, Y., Hwang, S.J., Min, J., Kim, T., Kim, S.W.: ‘A processor-based decoupled timing controller for flexible and low-cost 2D/3D plasma display panel design’, IEEE Trans. Consum. Electron., 2011, 57, (1), pp. 19 (doi: 10.1109/TCE.2011.5735476).
    11. 11)
      • 2. http://www.valueelectronics.com/, accessed July 2012.
    12. 12)
      • 5. Zhang, X.-N., Liu, C.-L., Tu, Z.-T., Zhang, J.: ‘Analysis of the address power in PDPs with a newly developed equivalent circuit model’, IEEE Trans. Consum. Electron., 2007, 53, (2), pp. 243–248 (doi: 10.1109/TCE.2007.381681).
    13. 13)
      • 14. van der Broeck, H., Wendt, M.: ‘Alternative sustain driver concepts for plasma display panels’. Proc. IEEE PESC, 2004, pp. 2672–2677.
    14. 14)
      • 18. Qian, Q., Sun, W., Li, H., Wu, H., Shi, L.: ‘Reliability investigations and improvements of the pLEDMOS for PDP data driver ICs’, Semicond. Sci. Technol., 2011, 26, (5), pp. 1–6 (doi: 10.1088/0268-1242/26/5/055001).
    15. 15)
      • 6. Li, J., He, X., Xu, S., Sun, W.: ‘A review of energy recovery circuits for plasma display panels’, IETE Tech. Rev., 2011, 28, (1), pp. 40 (doi: 10.4103/0256-4602.74504).
    16. 16)
      • 3. http://www.displaybank.com/, accessed June 2012.
    17. 17)
      • 1. Lee, K.-Y., Chao, P.-C.P.: ‘A new AMOLED pixel circuit with pulsed drive and reverse bias to alleviate OLED degradation’, IEEE Trans. Electron. Dev., 2012, 59, (4), p. 1123 (doi: 10.1109/TED.2012.2184289).
    18. 18)
      • 12. Yang, J.H., Kim, J.K., Whang, K.W.: ‘An energy recovery circuit for ac plasma display panel with series CLC resonance-SER1’, IEEE Trans. Consum. Electron., 2005, 51, (2), pp. 718–724 (doi: 10.1109/TCE.2005.1468024).
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-cds.2012.0249
Loading

Related content

content/journals/10.1049/iet-cds.2012.0249
pub_keyword,iet_inspecKeyword,pub_concept
6
6
Loading
Print this page
This is a required field
Please enter a valid email address