© The Institution of Electrical Engineers
A surface-wave reflective-array compressor using edge-bonded transducers and a fused-silica substrate is described. A flat amplitude response over a 60 MHz bandwidth about a 100 MHz centre frequency has been obtained by weighting the groove depth. This is in good agreement with the theoretical calculated transfer function involving a δ function method. Insertion loss is 25 dB and a pulse-compression loop has shown a compression ratio of nearly equal to 1.800.
References
-
-
1)
-
Williamson, R.C.: `Large time–bandwidth-product devices achieved through the use of surface-acoustic-wave reflection gratings', IEE Conf. Publ. 109, 1973, p. 181–190, Component performance and system applications of surface acoustic wave devices.
-
2)
-
D.W. Bakken ,
P.C. Meyer
.
Sidelobe reduction in reflective s.a.w. pulse compressors without external filtering.
Electron. Lett.
,
278 -
279
-
3)
-
R.C. Williamson ,
H.I. Smith
.
(1973)
IEEE Trans..
-
4)
-
Li, R.C.M., Melngailis, J.: Proceedings of ultrasonics symposium, 1973, p. 503–505.
-
5)
-
Lardat, C.: Proceedings of ultrasonics symposium, 1974, Milwaukee.
http://iet.metastore.ingenta.com/content/journals/10.1049/el_19750035
Related content
content/journals/10.1049/el_19750035
pub_keyword,iet_inspecKeyword,pub_concept
6
6