© The Institution of Engineering and Technology
In this Letter, an active area optimisation technique to improve the performance parameters of the film bulk acoustic resonator (FBAR) is proposed. The active area of the back trench membrane-based FBAR is optimised to remove the spurious modes, higher harmonic modes, and to confine the acoustic signal at its central part during the resonance. The effect of thickness variation of SiO2 layer on the performance parameters was studied using finite-element analysis (FEA) simulation. The SiO2 film, on silicon substrate, was used as the support layer and zinc oxide was used as the piezoelectric film for the resonator. The authors have successfully demonstrated the FBAR through FEA for an optimised active area of 320 × 320 µm2, series resonance frequency (f s) 1.249 GHz, and parallel resonance frequency (f p) 1.273 GHz with an effective electromechanical coupling coefficient of 4.65%.
References
-
-
1)
-
11. Kaitila, J., Ylilammi, M., Ella, J., et al: ‘Spurious resonance free bulk acoustic wave resonators’. IEEE Symp. on Ultrasonics, 2003, , pp. 84–87.
-
2)
-
5. Yang, D.Y., Kim, H.W.: ‘Film bulk acoustic resonator with improved lateral mode suppression’, , 2004.
-
3)
-
2. Chen, D., Wang, J.J., Xu, Y., et al: ‘Film bulk acoustic biosensor for detection of trace pesticide residues in agricultural products’, Electron. Lett., 2013, 49, (15), pp. 924–925 (doi: 10.1049/el.2013.1803).
-
4)
-
3. Chen, D., Wang, J.J.: ‘Lateral field excited film bulk acoustic resonator for detection of protein–ligand interactions’, Electron. Lett., 2012, 48, (19), pp. 1178–1179 (doi: 10.1049/el.2012.2156).
-
5)
-
8. Thalhammer, R., Kaitila, J., Zieglmeier, S., et al: ‘4E-3 spurious mode suppression in BAW resonators’. IEEE Ultrasonics Symp., Vancouver, BC, Canada, 2006, pp. 456–459.
-
6)
-
6. Liu, J., Omori, T., Ahn, C., et al: ‘Impact of surface periodic grating on film bulk acoustic resonator structures to spurious transverse resonances’, J. Appl. Phys., 2013, 113, (14), p. 144507 (doi: 10.1063/1.4801401).
-
7)
-
12. Kaitila, J.: ‘3C-1 review of wave propagation in BAW thin film devices-progress and prospects’. IEEE Symp. on Ultrasonics Proc., 2007, pp. 120–129.
-
8)
-
7. Serhane, R., Hadj-Larbi, F., Hassein-Bey, A., et al: ‘Selective band gap to suppress the spurious acoustic mode in film bulk acoustic resonator structures’, J. Vib. Acoust., 2018, 140, (3), p. 031018 (doi: 10.1115/1.4038944).
-
9)
-
10. Chen, D., Ren, W., Song, S., et al: ‘The high Q factor lateral field-excited thickness shear mode film bulk acoustic resonator working in liquid’, IEEE Micromach., 2016, 7, (12), p. 231 (doi: 10.3390/mi7120231).
-
10)
-
1. Pensala, T., Ylilammi, M.: ‘Spurious resonance suppression in gigahertz-range ZnO thin-film bulk acoustic wave resonators by the boundary frame method: modeling and experiment’, IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 2009, 56, (8), pp. 1731–1744 (doi: 10.1109/TUFFC.2009.1238).
-
11)
-
9. Yakimenko, Y., Zazerin, A., Orlov, A., et al: ‘Film bulk acoustic resonator finite element model in active filter design’. IEEE Proc. 37th Int. Spring Seminar on Electronics Technology, Dresden, Germany, 2014, pp. 486–490.
-
12)
-
4. Pillai, G., Zope, A.A., Tsai, J.M.L., et al: ‘Design and optimization of SHF composite FBAR resonators’, IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 2017, 64, (12), pp. 1864–1873 (doi: 10.1109/TUFFC.2017.2759811).
-
13)
-
13. Artieda, A., Muralt, P.: ‘High-Q AlN/SiO2 symmetric composite thin film bulk acoustic wave resonators’, IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 2008, 55, (11), pp. 2463–2468 (doi: 10.1109/TUFFC.953).
http://iet.metastore.ingenta.com/content/journals/10.1049/el.2020.1901
Related content
content/journals/10.1049/el.2020.1901
pub_keyword,iet_inspecKeyword,pub_concept
6
6