© The Institution of Engineering and Technology
To reduce the switching frequency of open-winding permanent magnet synchronous motor (OW-PMSM) system with a common DC bus, this Letter proposes a novel modulation method. In this method, the independent modulation is implemented in each phase to generate the reference voltages in the abc reference frame, where only one bridge arm has switching actions. Compared with the existing modulation methods for OW-PMSM system, the total switching actions within one PWM period can be remarkably reduced to 6 with the control target of the zero-sequence current suppression achieved, and the modulation range can be kept unchanged. The experimental results validate the availability of the proposed modulation method for OW-PMSM system.
References
-
-
1)
-
2. Zhou, Y., Nian, H.: ‘Zero-sequence current suppression strategy of open-winding PMSG system with common DC bus based on zero vector redistribution’, Trans. Ind. Electron., 2015, 62, (6), pp. 3399–3408, .
-
2)
-
4. Balamurali, A., Feng, G., Lai, C., et al: ‘Investigation into variation of permanent magnet synchronous motor-drive losses for system level efficiency improvement’. IECON 2017 – 43rd Annual Conf. IEEE Industrial Electronics Society, Beijing, China, 29 October–1 November 2017, pp. 2014–2019, .
-
3)
-
1. Zhan, H., Zhu, Z., Odavic, M.: ‘Analysis and suppression of zero sequence circulating current in open winding PMSM drives with common DC bus’, Trans. Ind. Electron., 2017, 53, (4), pp. 3609–3620, .
-
4)
-
3. Hu, W., Nian, H., Sun, D.: ‘Zero-sequence current suppression strategy with reduced switching frequency for open-end winding PMSM drives with common DC bus’, Trans. Ind. Electron., 2019, 66, (10), pp. 7613–7623 (doi: 10.1109/TIE.2018.2881945).
http://iet.metastore.ingenta.com/content/journals/10.1049/el.2019.1070
Related content
content/journals/10.1049/el.2019.1070
pub_keyword,iet_inspecKeyword,pub_concept
6
6