© The Institution of Engineering and Technology
A new step-up DC–DC converter is presented, based on quasi-Z-source network intended for photovoltaic applications. The proposed converter combines voltage multiplier cells to the secondary winding of the coupled inductor which is included in the second inductor of the quasi-Z-source network. In the output of the quasi-Z-source network, a switched capacitor is connected. This converter shows attractive characteristics such as high voltage gain, low voltage stresses on their components, continuous input current. A detailed description of the operating principles of the proposed converter is presented and experimental results on a 250 W prototype show that a high efficiency above 91.4% can be achieved.
References
-
-
1)
-
3. Gorji, S.A., Ektesabi, M., Zheng, J.: ‘Isolated switched-boost push–pull DC–DC converter for step-up applications’, Electron. Lett., 2017, 53, (3), pp. 177–179, (doi: 10.1049/el.2016.4151).
-
2)
-
20. Nguyen, M.K., Lim, Y.C., Cho, G.B.: ‘Switched-inductor quasi-Z-source inverter’, IEEE Trans. Power Electron., 2011, 26, (11), pp. 3183–3191 (doi: 10.1109/TPEL.2011.2141153).
-
3)
-
2. Anderson, J., Peng, F.Z.: ‘Four quasi-Z-source inverters’. IEEE Power Electronics Specialists Conf., Rhodes, Greece, June 2008, pp. 2743–2749, .
-
4)
-
5. Li, K., Hu, Y., Ioinovici, A.: ‘Generation of the large DC gain step-up nonisolated converters in conjunction with renewable energy sources starting from a proposed geometric structure’, Trans. Power Electron., 2017, 32, (7), pp. 5323–5340, (doi: 10.1109/TPEL.2016.2609501).
-
5)
-
6. Shen, H., Zhang, B., Qiu, D.: ‘Hybrid Z-source boost DC–DC converters’, Trans. Ind. Electron., 2017, 64, (1), pp. 310–319, (doi: 10.1109/TIE.2016.2607688).
-
6)
-
7. Nguyen, M.K., Lim, Y.C., Choi, J.H., et al: ‘Isolated high step-up DC–DC converter based on quasi-switched-boost network’, Trans. Ind. Electron., 2016, 63, (12), pp. 7553–7562, (doi: 10.1109/TIE.2016.2586679).
-
7)
-
4. Hu, X., Li, L., Li, Y., et al: ‘Input-parallel output-series DC–DC converter for non-isolated high step-up applications’, Electron. Lett., 2016, 52, (20), pp. 1715–1717, (doi: 10.1049/el.2016.2835).
http://iet.metastore.ingenta.com/content/journals/10.1049/el.2018.1005
Related content
content/journals/10.1049/el.2018.1005
pub_keyword,iet_inspecKeyword,pub_concept
6
6