© The Institution of Engineering and Technology
We measured the impact of the thermoelectric effect, especially the Peltier effect, upon the operation of phase change memory (PCM) in which the contact resistance between the phase change material and the electrode dominates the total resistance. A PCM device having a pillar structure of diameter 500 nm was fabricated using GeCu2Te3 (GCT) material. During read operation, the set state (with crystalline PCM) showed ohmic contact between the PCM and the electrode, whereas the reset state (with amorphous PCM) showed Schottky contact. The Schottky contact between the amorphous GCT and the electrode showed a bias polarity dependence of set operation owing to the Peltier effect, which is one of the thermoelectric effects. As PCM devices scale down to the nanometre scale, research on contact resistance and various related effects will become more important.
References
-
-
1)
-
9. Saito, Y., Sutou, Y., Fons, P., et al: ‘Electronic structure of transition-metal based Cu2GeTe3 phase change material: revealing the key role of Cu d electrons’, Chem. Mater., 2017, 29, (17), pp. 7400–7449 (doi: 10.1021/acs.chemmater.7b02436).
-
2)
-
2. Wong, H.S.P., Raoux, S., Kim, S.B., et al: ‘Phase change memory’, Proc. IEEE, 2010, 98, (12), pp. 2201–2227 (doi: 10.1109/JPROC.2010.2070050).
-
3)
-
2. Kim, E.H., Kang, N.S., Yang, H.J., et al: ‘Novel device structure for phase change memory toward low-current operation’, Jpn J. Appl. Phys., 2015, 54, (9), p. 094302 (doi: 10.7567/JJAP.54.094302).
-
4)
-
10. Shindo, S., Sutou, Y., Koike, J., Saito, Y., Song, Y.H.: ‘Contact resistivity of amorphous and crystalline GeCu2Te3 to W electrode for phase change random access memory’, Mater. Sci. Semicond. Process., 2016, 47, pp. 1–6 (doi: 10.1016/j.mssp.2016.02.006).
-
5)
-
7. Faraclas, A., Bakan, G., Adnane, L., et al: ‘Modeling of thermoelectric effects in phase change memory cells’, Trans. Electron Dev., 2014, 61, (2), pp. 372–378 (doi: 10.1109/TED.2013.2296305).
-
6)
-
1. Burr, G.W., Breitwisch, M.J., Franceschini, M., et al: ‘Phase change memory technology’, J. Vac. Sci. Technol. B, 2010, 28, (2), pp. 223–262 (doi: 10.1116/1.3301579).
-
7)
-
5. Grosse, K.L., Xiong, F., Hong, S., et al: ‘Direct observation of nanometer-scale joule and Peltier effects in phase change memory devices’, Appl. Phys. Lett., 2013, 102, (19), p. 193503 (doi: 10.1063/1.4803172).
-
8)
-
6. Kencke, D.L., Karpov, I.V., Johnson, B.G., et al: ‘The role of interfaces in damascene phase-change memory’. IEDM Technical Digest, Washington, DC, USA, December 2007, pp. 323–326, .
-
9)
-
9. Kamada, T., Sutou, Y., Sumiya, M., Saito, Y.: ‘Crystallization and electrical characteristics of Ge1Cu2Te3 films for phase change random access memory’, Solid Films, 2012, 520, (13), pp. 4389–4393 (doi: 10.1016/j.tsf.2012.02.025).
http://iet.metastore.ingenta.com/content/journals/10.1049/el.2017.3902
Related content
content/journals/10.1049/el.2017.3902
pub_keyword,iet_inspecKeyword,pub_concept
6
6
Correspondence
This article has following corresponding article(s):
narrowing window