© The Institution of Engineering and Technology
Direct write dispenser printed sound-emitting smart fabrics are reported for creative applications and wearable electronics. Using dispenser printing, sound emission can be easily added to various fabric substrates, from industrial coated architectural fabrics to everyday woven polyester cotton fabrics. Two different types of sound emission have been realised on fabrics: a piezoelectric buzzer and an electromagnetic planar spiral speaker with an external magnet. These two planar sound emitting devices are flexible and simpler than conventional three-dimensional electromagnetic and electrostatic sound emitting devices. Furthermore, the spiral-based planar electromagnetic speakers allow interactive applications by changing the distance between the magnet and the speaker. The theory and the manufacturing technology of the direct write printed fabric buzzer and speaker are reported.
References
-
-
1)
-
6. Perc, B., Kuscer, D., Holc, J., Belavic, D., Svetec, D.G., Guermonprez, P., Kosec, M.: ‘The processing and characterisation of a strain sensor on a textile’. 41st Int. Symp. on Novelties in Textiles, Ljubljana, Slovenia, May 2010.
-
2)
-
3. Almusallam, A., Torah, R.N., Zhu, D., Tudor, M.J., Beeby, S.P.: ‘Screen printed piezoelectric shoe-insole energy harvester using an improved flexible PZT-polymer composites’. IOP Publishing, Journal of Physics: Conf. Series 476, PowerMEMS 2013, London, UK, December 2013, p. 012108.
-
3)
-
1. Locher, I., Troster, G.: ‘Screen printed textile transmission lines’, Tex. Res. J., 2007, 77, (11), pp. 837–842 (doi: 10.1177/0040517507080679).
-
4)
-
7. Whittow, W., Li, Y., Torah, R., Yang, K., Beeby, S., Tudor, J.: ‘Printed frequency selective surface on textiles’, Electron. Lett., 2014, 50, (13), pp. 916–917 (doi: 10.1049/el.2014.0955).
-
5)
-
8. Ho, C.C.: ‘Dispenser printed zinc microbattery with an ionic liquid gel electrolyte’. PhD thesis, Materials Science & Engineering, UC Berkeley 2011.
-
6)
-
5. Wei, Y., Torah, R., Yang, K., Beeby, S., Tudor, J.: ‘A screen printable sacrificial fabrication process to realise a contilever on fabric using a piezoelectric layer to detect motion for wearable applications’, Sens. Actuators, 2013, 203, pp. 241–248 (doi: 10.1016/j.sna.2013.08.041).
-
7)
-
10. Madan, D., Chen, A., Wright, P.K., Evans, J.W.: ‘Dispenser printed composite thermoelectric thick films for thermoelectric generator applications’, J. Appl. Phys., 2011, 108, p. 034904 (doi: 10.1063/1.3544501).
-
8)
-
9. Ho, C.C., Evans, J.W., Wright, P.K.: ‘Direct write dispenser printing of a zinc microbattery with an ionic liquid gel electrolyte’, J. Micromech. Microeng., 2010, 20, p. 104009 (doi: 10.1088/0960-1317/20/10/104009).
-
9)
-
2. Neral, B., Turk, S.S., Voncina, B.: ‘Properties of UV-cured pigment prints on textile fabric’, Dyes Pigments, 2006, 68, (2–3), pp. 143–150 (doi: 10.1016/j.dyepig.2005.01.022).
-
10)
-
4. Sloma, M., Fanczak, D., Wroblewski, G., Mlozniak, A., Fakubowska, M.: ‘Electroluminescent structures printed on paper and textile elastic substrates’, Circuit World, 2014, 40, (1), pp. 13–16 (doi: 10.1108/CW-10-2013-0037).
http://iet.metastore.ingenta.com/content/journals/10.1049/el.2015.0235
Related content
content/journals/10.1049/el.2015.0235
pub_keyword,iet_inspecKeyword,pub_concept
6
6