This is an open access article published by the IET and Southwest Jiaotong University under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0/)
The traditional bionic upper limb structure design is limited by the motion pair and cannot guarantee the flexibility of the mechanical structure. The tensegrity structure has the characteristics of high deformability, strong self-adaptability, and resistance to multi-directional impact. According to the biological characteristics of the upper limbs of the human body, an anatomical study is performed on the upper limb wrist joints that achieve adduction/abduction, flexion/extension, to obtain the relationship between the movements of the related bones and muscles, and to simplify the shape and structure of the wrist. Equivalent mapping of a mechanical model based on two-bar tensile properties. Through the contraction and stretching of the spring, the movement characteristics of the human muscles are realised, and the optimised bionic upper limb wrist tensioning robot without motion pair is further obtained. Adams simulation is used to verify that the bionic tensile wrist can simulate the change movement of the human wrist. The experimental platform was built and a physical prototype was made and the prototype was tested. The results show that the bionic tensile wrist can realise the adaptive motion characteristics of the human wrist well and stably, which proves the validity and feasibility of this design method.
References
-
-
1)
-
[16]. Myers, K.A., Wang, M., Marks, R.M., et al: ‘Validation of a multisegment foot and ankle kinematic model for pediatric gait’, IEEE Trans. Neural Syst. Rehabil. Eng., 2004, 12, (1), pp. 122–130 (doi: 10.1109/TNSRE.2003.822758).
-
2)
-
[25]. Mustafa, S.K., Yang, G., Yeo, S.H., et al: ‘Development of a bio-inspired wrist prosthesis’. 2006 IEEE Conf. on Robotics, Automation and Mechatronics, Bangkok, Thailand, 2006, pp. 1–6.
-
3)
-
[14]. Scarr, G.: ‘A consideration of the elbow as a tensegrity structure’, Int. J. Osteopath. Med., 2012, 15, (2), pp. 53–65 (doi: 10.1016/j.ijosm.2011.11.003).
-
4)
-
[21]. Shaikh, S.I., Chauhan, A.A., Patel, U.: ‘Role of scaphoid in the abduction and adduction movements of wrist joint’, Natl. J. Med. Res., 2013, 3, (3), pp. 253–256.
-
5)
-
[13]. Fest, E., Shea, K., Smith, I.F.C.: ‘Active tensegrity structure’, J. Struct. Eng., 2004, 130, (10), pp. 1454–1465 (doi: 10.1061/(ASCE)0733-9445(2004)130:10(1454)).
-
6)
-
[15]. Zhou, X., Mo, J.L., Jin, Z.M.: ‘Overview of finger friction and tactile perception’, Biosurface and Biotribology, 2018, 4, (4), pp. 99–111 (doi: 10.1049/bsbt.2018.0032).
-
7)
-
[8]. Liu, X, Wang, J, Gao, F, et al: ‘Design of a serial-parallel 7-DOF redundant anthropomorphic arm’, Zhongguo Jixie Gongcheng/China Mech. Eng., 2002, 13, (2), pp. 101–104 (doi: 10.3901/JME.2002.09.101).
-
8)
-
[22]. Brown, J.P.: ‘Kenneth Snelson: Forces Made Visible [J]’, Library Journal, 2009, 134, (14), p. 111..
-
9)
-
[17]. Pandy Marcus, G., Thomas, P.: ‘Andriacchi. Muscle and joint function in human locomotion’, Annu. Rev. Biomed. Eng., 2010, 12, pp. 401–433 (doi: 10.1146/annurev-bioeng-070909-105259).
-
10)
-
[11]. Wang, N., Tytell, J.D., Ingber, D.E.: ‘Mechanotransduction at a distance: mechanically coupling the extracellular matrix with the nucleus’, Nat. Rev. Mol. Cell Biol., 2009, 10, (1), pp. 75–82 (doi: 10.1038/nrm2594).
-
11)
-
[9]. Lessard, S, Castro, D, Asper, W, et al: ‘A bio-inspired tensegrity manipulator with multi-DOF, structurally compliant joints2016 IEEE/RSJ Int. Conf. on Intelligent Robots and Systems (IROS), Daejeon, Republic of Korea, 2016, pp. 5515–5520.
-
12)
-
[4]. Hagerty J, R.: ‘New robots designed to be more agile and work next to humans: abb introduces the YuMi robot at a trade fair in Germany’, Wall Street J., 2015, 13, p. 13.
-
13)
-
[10]. Baltaxe-Admony, L.B., Robbins, A.S., Jung, E.A., et al: ‘Simulating the human shoulder through active tensegrity structures’. ASME 2016 Int. Design Engineering Technical Conf.s and Computers and Information in Engineering Conf.. Charlotte, NC, USA, 2016, .
-
14)
-
[3]. Wimböck, T, Nenchev, D, Albu-Schäffer, A, et al: ‘Experimental study on dynamic reactionless motions with DLR's humanoid robot Justin’. 2009 IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, St Louis, MI, USA, 2009, pp. 5481–5486.
-
15)
-
[26]. Montagnani, F, Controzzi, M, Cipriani, C.: ‘Preliminary design and development of a two degrees of freedom passive compliant prosthetic wrist with switchable stiffness’. 2013 IEEE Int. Conf. on Robotics and Biomimetics (ROBIO), Shenzhen, People's Republic of China, 2013, pp. 310–315.
-
16)
-
[12]. Wang, N, Naruse, K, Stamenović, D, et al: ‘Mechanical behavior in living cells consistent with the tensegrity model’, Proc. Natl. Acad. Sci., 2001, 98, (14), pp. 7765–7770 (doi: 10.1073/pnas.141199598).
-
17)
-
[24]. Jin, Z.M., Zheng, J., Li, W., et al: ‘Tribology of medical devices’, Biosurface and Biotribology, 2016, 2, (4), pp. 173–192 (doi: 10.1016/j.bsbt.2016.12.001).
-
18)
-
[2]. Iwata, H, Sugano, S.: ‘Design of human symbiotic robot TWENDY-ONE’. 2009 IEEE Int. Conf. on Robotics and Automation, Kobe, Japan, 2009, pp. 580–586.
-
19)
-
[7]. Richard, M.J.: ‘On the direct kinematics of spherical three-degree-of-freedom parallel manipulators of general architecture’, J. Mech. Des., 1994, 116, pp. 594–598 (doi: 10.1115/1.2919419).
-
20)
-
[23]. Motro, R.: ‘Structural morphology of tensegrity systems’, Int. J. Space Struct., 1996, 11, (1-2), pp. 233–240 (doi: 10.1177/026635119601-228).
-
21)
-
[6]. Wang, M.L., Peng, Z.X.: ‘Wear in human knees’, Biosurface and Biotribology, 2015, 1, (2), pp. 98–112 (doi: 10.1016/j.bsbt.2015.06.003).
-
22)
-
[1]. Park, C, Park, K.: ‘Design and kinematics analysis of dual arm robot manipulator for precision assembly’. 2008 6th IEEE Int. Conf. on Industrial Informatics, Daejeon, Republic of Korea, 2008, pp. 430–435.
-
23)
-
[5]. Torner, R.J., Alpiste, P.F., Brigos Hermida, M.Á: ‘Robotic arm controlled through vision and biomechanical sensors’, Dyna ingeniería E Industria, 2017, 4, pp. 1–14.
-
24)
-
[18]. Ingber, D.E., Madri, J.A., Jamieson, J.D.: ‘Role of basal lamina in neoplastic disorganization of tissue architecture’, Proc. Natl. Acad. Sci., 1981, 78, (6), pp. 3901–3905 (doi: 10.1073/pnas.78.6.3901).
-
25)
-
[20]. Gray, H., Goss, C.M.: ‘Anatomy of the human body’, Am J. Phys. Med. Rehabil., 1974, 53, (6), p. 293.
-
26)
-
[19]. Levin, S.M.: ‘Continuous tension, discontinuous compression: a model for biomechanical support of the body’, Bulletin Struct. Integr., 1982, 8, (1), pp. 31–33.
http://iet.metastore.ingenta.com/content/journals/10.1049/bsbt.2019.0022
Related content
content/journals/10.1049/bsbt.2019.0022
pub_keyword,iet_inspecKeyword,pub_concept
6
6