Polylysine-modified titania nanotube arrays for local drug delivery
- Author(s): Tao Zhang 1 ; Yan Liu 2 ; Fengfen Zhang 2 ; Xiufeng Xiao 2
-
-
View affiliations
-
Affiliations:
1:
Department of Orthopedics Institute , Fuzhou Second Hospital , Fuzhou 350007 , People's Republic of China ;
2: Fujian Provincial Key Laboratory of Advanced Materials Oriented Chemical Engineering, College of Chemistry and Chemical Engineering , Fujian Normal University , Fuzhou 350007 , People's Republic of China
-
Affiliations:
1:
Department of Orthopedics Institute , Fuzhou Second Hospital , Fuzhou 350007 , People's Republic of China ;
- Source:
Volume 13, Issue 1,
January
2018,
p.
93 – 95
DOI: 10.1049/mnl.2017.0312 , Online ISSN 1750-0443
A drug delivery system based on ɛ-polylysine-modified titania nanotube (ɛ-PL-TNTs) arrays was prepared. Polylysine on the nanotubes’ surface can effectively bind with alendronate, a drug for the treatment of osteoporosis, through chemical bond. The bonds are fairly stable in an acid environment and cannot easily break up in a physiological environment. The ɛ-PL-TNTs increased the amount of drug loading by 9% in weight. The in vitro release profile of alendronate from ɛ-PL-TNTs showed a significant reduced burst release and an extended overall release of more than 15 days.
Inspec keywords: nanofabrication; drug delivery systems; bonds (chemical); polymers; semiconductor nanotubes; semiconductor materials; nanomedicine; diseases; biomedical materials; titanium compounds
Other keywords: chemical bond; TiO2; acid environment; physiological environment; ε-polylysine-modified titania nanotube arrays; osteoporosis treatment; in vitro release prohle; drug loading; local drug delivery; alendronate
Subjects: Patient care and treatment; Nanotechnology applications in biomedicine; Biomedical materials; Patient care and treatment
References
-
-
1)
-
15. Amugongo, S.K., Yao, W., Jia, J.: ‘Effects of sequential osteoporosis treatments on trabecular bone in adult rats with low bone mass’, Osteoporosis Int., 2014, 25, pp. 1735–1750 (doi: 10.1007/s00198-014-2678-5).
-
-
2)
-
6. LaVan, D.A., McGuire, T., Langer, R.: ‘Small-scale systems for in vivo drug delivery’, Nat. Biotechnol., 2003, 21, pp. 1184–1191 (doi: 10.1038/nbt876).
-
-
3)
-
2. Gultepe, E., Nagesha, D., Sridhar, S.: ‘Nanoporous inorganic membranes or coatings for sustained drug delivery in implantable devices’, Adv. Drug Deliv. Rev., 2010, 62, pp. 305–315 (doi: 10.1016/j.addr.2009.11.003).
-
-
4)
-
12. Simovic, S., Losic, D., Vasilev, K.: ‘Controlled drug release from porous materials by plasma polymer deposition’, Chem. Commun., 2010, 46, (8), pp. 1317–1319 (doi: 10.1039/b919840g).
-
-
5)
-
10. Gulati, K., Ramakrishnan, S., Aw, M.S., et al: ‘Biocompatible polymer coating of titania nanotube arrays for improved drug elution and osteoblast adhesion’, Acta Biomater., 2012, 8, p. 449 (doi: 10.1016/j.actbio.2011.09.004).
-
-
6)
-
16. Gundogdu, E., Ilem-Ozdemir, D., Asikoglu, M.: ‘In vitro incorporation studies of 99 m Tc–alendronate sodium at different bone cell lines’, J. Radioanal. Nucl. Chem., 2014, 299, pp. 1255–1260 (doi: 10.1007/s10967-013-2833-z).
-
-
7)
-
5. Aw, M.S., Kurian, M., Losic, D.: ‘Polymeric micelles for multidrug delivery and combination therapy’, Chem. Eur. J., 2013, 19, pp. 12586–12601 (doi: 10.1002/chem.201302097).
-
-
8)
-
11. Kumeria, T., Mon, H., Aw, M.S.: ‘Advanced biopolymer-coated drug-releasing titania nanotubes (TNTs) implants with simultaneously enhanced osteoblast adhesion and antibacterial properties’, Colloids Surf. B, Biointerfaces, 2015, 130, pp. 255–263 (doi: 10.1016/j.colsurfb.2015.04.021).
-
-
9)
-
17. Kunze, J., Ghicov, A., Hildebrand, H.: ‘Challenges in the surface analytical characterisation of anodic TiO2 films – a review’, Z. Für Phys. Chem., 2005, 219, (11), pp. 1561–1582 (doi: 10.1524/zpch.2005.219.11.1561).
-
-
10)
-
8. Shi, L., Xu, H., Liao, X.: ‘Fabrication of two-layer nanotubes with the pear-like structure by an in-situ voltage up anodization and the application as a drug delivery platform’, J. Alloys Compd., 2015, 647, (1), pp. 590–595 (doi: 10.1016/j.jallcom.2015.06.015).
-
-
11)
-
13. Losic, D., Cole, M.A., Dollmann, B.: ‘Surface modification of nanoporous alumina membranes by plasma polymerization’, Nanotechnology, 2008, 19, pp. 245704 (doi: 10.1088/0957-4484/19/24/245704).
-
-
12)
-
6. Shrestha, N.K., Macak, J.M., Schmidt-Stein, F.: ‘Magnetically guided titania nanotubes for site-selective photocatalysis and drug release’, Angew Chem. Int. Ed., 2009, 48, pp. 969–972 (doi: 10.1002/anie.200804429).
-
-
13)
-
9. Cheng, F., Sajedin, S.M., Kelly, S.M.: ‘UV-stable paper coated with APTES-modified P25 TiO2, nanoparticles’, Carbohydr. Polym., 2014, 114, (114), pp. 246–252 (doi: 10.1016/j.carbpol.2014.07.076).
-
-
14)
-
7. Hernández-López, J.M., Conde, A., de Damborenea, J.J., et al: ‘TiO2 nanotubes with tunable morphologies’, RSC Adv., 2014, 4, pp. 62576–62585 (doi: 10.1039/C4RA11457D).
-
-
15)
-
3. Jeon, G., Seung Yang, Y., Kim, J.K.: ‘Functional nanoporous membranes for drug delivery’, J. Mater. Chem., 2012, 22, pp. 14814–14834 (doi: 10.1039/c2jm32430j).
-
-
16)
-
14. Sinnaw, M., Kurian, M., Losic, D.: ‘Non-eroding drug-releasing implants with ordered nanoporous and nanotubular structures: concepts for controlling drug release’, Biomater. Sci., 2013, 2, (1), pp. 10–34 (doi: 10.1039/C3BM60196J).
-
-
17)
-
4. Pittrof, A., Bauer, S., Schmuki, P.: ‘Micropatterned TiO2 nanotube surfaces for site-selective nucleation of hydroxyapatite from simulated body fluid’, Acta Biomater., 2011, 7, pp. 424–431 (doi: 10.1016/j.actbio.2010.09.028).
-
-
1)