Unsaturated polyester resin/epoxy-functionalised nanosilica composites constructed by in situ polymerisation

Haiyang Yao; Hao Pan; Rui Rui Li; Xiaohong Li; Zhijun Zhang

Unsaturated polyester resin/epoxy-functionalised nanosilica composites constructed by in situ polymerisation

View Fulltext

Author(s): Haiyang Yao ¹ ; Hao Pan ¹ ; Rui Rui Li ¹ ; Xiaohong Li ^{1, 2} ; Zhijun Zhang ^{1, 2}
- Affiliations: 1: Key Laboratory of Ministry of Education for Special Functional Materials, Henan University, Kaifeng 475004, Henan Province, People's Republic of China ;
  2: Collaborative Innovation Center of Nano Functional Materials and Applications, Henan University, Kaifeng 475004, Henan Province, People's Republic of China
Source: Volume 10, Issue 9, September 2015, p. 427 – 431
DOI: 10.1049/mnl.2015.0085 , Online ISSN 1750-0443

« Previous Article
Table of contents
Next Article »

Received 06/03/2015, Accepted 22/05/2015, Revised 19/05/2015, Published 25/08/2015

A reactable nanosilica surface capped with a silane coupling agent containing the epoxy group (denoted as RNS-E) was allowed to participate in the in situ polycondensation reaction of unsaturated polyester resin (denoted as UPR) thereby affording the UPR/RNS-E composite. The structure of the as-prepared UPR/RNS-E composites was investigated by means of Fourier transform infrared spectrometry, thermogravimetric analysis and scanning electron microscopy, and their tensile strength and impact strength were compared with those of pure UPR cured under the same condition and of UPR/RNS-E composites prepared by mechanical blending. It was found that RNS-E exhibits good strengthening effect and toughening effect for the in situ polymerised UPR/RNS-E composite, which is attributed to the formation of a heterogeneous network structure in the cured UPR/RNS-E composites via the chemical reaction among the epoxy group of RNS-E and the hydroxyl (carboxyl) group of UPR. Particularly, the UPR/RNS-E composite with 0.6% RNS-E nanofiller has the highest tensile strength and impact strength, and it is much superior to the same composite obtained by mechanical blending.

References

1. 1)
  - 15. Zhang, J., Guo, Z., Zhi, X., Tang, H.: ‘Surface modification of ultrafine precipitated silica with 3-methacryloxypropyltrimethoxysilane in carbonization process’, Colloids Surf. A, 2013, 418, pp. 174–179 (doi: 10.1016/j.colsurfa.2012.11.057).
2. 2)
  - 18. Ruban, Y.J.V., Mon, S.G., Roy, V.: ‘Mechanical and thermal studies of unsaturated polyester-toughened epoxy composites filled with amine-functionalized nanosilica’, Appl. Nanosci., 2013, 3, (1), pp. 7–12 (doi: 10.1007/s13204-012-0068-x).
3. 3)
  - 10. Zapata, P.A., Tamayo, L., Páez, M., Cerda, E., Azócar, I., Rabagliati, F.M.: ‘Nanocomposites based on polyethylene and nanosilver particles produced by metallocenic ‘in situ’ polymerization: synthesis, characterization, and antimicrobial behavior’, Eur. Polym. J., 2011, (47), pp. 1541–1549 (doi: 10.1016/j.eurpolymj.2011.05.008).
4. 4)
  - 1. Pereira, C.M.C., Herrero, M., , Labajos, F.M., Merques, A.T., Rives, V.: ‘Preparation and properties of new flame retardant unsaturated polyester nanocomposites based on layered double hydroxides’, Polym. Degradation Stab., 2009, 94, (6), pp. 939–946 (doi: 10.1016/j.polymdegradstab.2009.03.009).
5. 5)
  - 14. Shu, H., Liu, K., Liu, F., Zhang, Z., Li, X.: ‘Improving mechanical properties of poly (vinyl chloride) by doping with organically functionalized reactive nanosilica’, J. Appl. Polym. Sci., 2013, 129, (5), pp. 2931–2939 (doi: 10.1002/app.38944).
6. 6)
  - 7. Feng, Y., Wang, B., Wang, F., et al: ‘Thermal degradation mechanism and kinetics of polycarbonate/silica nanocomposites’, Polym. Degradation Stab., 2014, 107, pp. 129–138 (doi: 10.1016/j.polymdegradstab.2014.05.012).
7. 7)
  - 4. Worzakowska, M.: ‘Thermal and dynamic mechanical properties of IPNS formed from unsaturated polyester resin and epoxy polyester’, J. Mater. Sci., 2009, 15, (44), pp. 4069–4077 (doi: 10.1007/s10853-009-3587-4).
8. 8)
  - 5. Chaeichian, S., Wood-Adams, P.M.: ‘In situ polymerization of polyester-based hybrid systems for the preparation of clay nanocomposites’, Polym., J., 2013, 54, (5), pp. 1512–1523 (doi: 10.1016/j.polymer.2012.09.021).
9. 9)
  - 13. Li, X., Cao, Z., Zhang, Z., Li, X.: ‘Surface-modification in situ of nano-SiO2 and its structure and tribological properties’, Appl. Surf. Sci., 2006, 252, (22), pp. 7856–7861 (doi: 10.1016/j.apsusc.2005.09.068).
10. 10)
  - 16. Zhang, S., Guo, M., Chen, Z., Liu, Q.H., Liu, X.: ‘Grafting photosensitive polyurethane onto colloidal silica for use inUV-curing polyurethane nanocomposites’, Colloids Surf. A, 2014, (443), pp. 525–534 (doi: 10.1016/j.colsurfa.2013.12.019).
11. 11)
  - 17. Zhou, J., Dong, B.: ‘A study on the infra-red spectrometry of unsaturated polyesters’, Thermosetting Resin, 2003, 18, pp. 22–24.
12. 12)
  - 6. Yinghong, X.: ‘Nanometre-sized TiO2 as applied to the modification of unsaturated polyester resin’, Mater. Chem. Phys., 2003, 77, (2), pp. 609–611 (doi: 10.1016/S0254-0584(02)00114-1).
13. 13)
  - 9. Cai, L.F., Lin, Z.Y., Qian, H.: ‘Dispersion of nano-silica in monomer casting nylon6 and its effect on the structure and properties of composites’, Express Polym. Lett., 2010, 4, (7), pp. 397–403 (doi: 10.3144/expresspolymlett.2010.50).
14. 14)
  - 3. Zhang, M., Singh, R.P.: ‘Mechanical reinforcement of unsaturated polyester by Al2O3 nanoparticles’, Mater. Lett., 2004, 58, (3), pp. 408–412 (doi: 10.1016/S0167-577X(03)00512-3).
15. 15)
  - 20. Sudirman, , Budiarto, E., Gunawan, I.: ‘Synthesis and characterization of polyester-based nanocomposite’, Procedia Chem., 2012, (4), pp. 107–113 (doi: 10.1016/j.proche.2012.06.016).
16. 16)
  - 8. Evora, A.V., Shukla, A.: ‘Fabrication, characterization, and dynamic behavior of polyester/TiO2 nanocomposites’, Mater. Sci. Eng., 2003, 361, pp. 358–366 (doi: 10.1016/S0921-5093(03)00536-7).
17. 17)
  - 11. Chaichana, E., Jongsomjit, B., Praserthdam, P.: ‘Effect of nano-SiO2 particle size on the formation of LLDPE/SiO2 nanocomposite synthesized via the in situ polymerization with metallocene catalyst’, Chem. Eng. Sci., 2007, 62, (3), pp. 899–905 (doi: 10.1016/j.ces.2006.10.005).
18. 18)
  - 19. Liu, K., Zheng, N., Li, X., Zhang, Z.: ‘Preparation of in-situ surface-modified nanosilica and its application in separating oil from water’, Micro Nano Lett., 2013, 1, (8), pp. 15–18 (doi: 10.1049/mnl.2012.0887).
19. 19)
  - 12. Goodarzi, V., Moremiam, S.A., Maleki, F., Angaji, M.T.: ‘In situ radical copolymerization in presence of surface-modified TiO2 nanoparticles: influence of a double modification on properties of unsaturated polyester (UP) nanocomposites’, J. Macromol. Sci., Phys., 2008, 47, pp. 472–487 (doi: 10.1080/00222340801955065).
20. 20)
  - 2. Ollier, R., Rodriguez, E., Alvarez, V.: ‘Unsaturated polyester/bentonite nanocomposites: influence of clay modification on final performance’, Compos. A, 2013, 48, pp. 137–143 (doi: 10.1016/j.compositesa.2013.01.005).

Login

Not registered yet?

Share

Tools

Login to add to favourites

Key

Unsaturated polyester resin/epoxy-functionalised nanosilica composites constructed by in situ polymerisation

References

Related content