© The Institution of Engineering and Technology
This Letter presents a low-cost, high-throughput strategy for fabricating size-tunable hierarchical CrN nanohole arrays for a nanomould using a magnetron sputtering approach with nanosphere lithography (NIL)-based technology. The size of the polystyrene nanospheres has a direct influence on the diameter and period of the CrN nanohole structure. The reactive ion etching and magnetron sputtering process can easily control the nanohole size and depth. The hole depth generally depends on the film thickness. The contact angles were measured by the sessile drop method using distilled water, ethylene glycol and diiodomethane. The surface-free energy of the CrN nanomould was calculated using the Owens–Wendt geometric mean approach. This Letter reports the successful fabrication of a series of nanoholes with diameters decreased from 347 ± 9.6 to approximately 166 ± 11.8 nm with a depth of 100 ± 5.6 nm. The corresponding surface-free energy decreased from 40.83 to approximately 24.58 mN/m. The diameter of nanoholes has an obvious effect on the surface-free energy and there is tendency for the surface-free energy to decrease with the decrease in the diameter of the nanoholes. This new approach of ordered CrN nanohole array structures can be used to create a two-dimensional nanomould for NIL.
References
-
-
1)
-
17. Gautier, C., Machet, J.: ‘Study of the growth mechanisms of chromium nitride films deposited by vacuum ARC evaporation’, Thin Solid Films, 1997, 295, pp. 43–52 (doi: 10.1016/S0040-6090(96)09164-X).
-
2)
-
T. Young
.
An essay on the cohesion of fluids.
Philos. Trans. R. Soc. Lond.
,
65 -
87
-
3)
-
13. Wang, D.-Y., Lin, J.-H., Ho, W.-Y.: ‘Study on chromium oxide synthesized by unbalanced magnetron sputtering’, Thin Solid Films, 1998, 332, pp. 295–299 (doi: 10.1016/S0040-6090(98)01266-8).
-
4)
-
9. Wang, D.-Y., Chiu, M.-C.: ‘Characterization of Cr2O3 CrN duplex coatings for injection molding applications’, Surf. Coat. Technol., 2001, 137, pp. 164–169 (doi: 10.1016/S0257-8972(00)01109-9).
-
5)
-
3. Schwenzer, B., Gomm, J.R., Morse, D.E.: ‘Substrate-induced growth of nanostructured zinc oxide films at room temperature using concepts of biomimetic catalysis’, Langmuir, 2006, 22, pp. 9829–9831 (doi: 10.1021/la0626914).
-
6)
-
7. Jeong, S.Y., Kim, J.Y., Yang, H.D., et al: ‘Synthesis of silicon nanotubes on porous alumina using molecular beam epitaxy’, Adv. Mater., 2003, 15, pp. 1172–1176. (doi: 10.1002/adma.200304898).
-
7)
-
5. Zhao, X.-M., Xia, Y., Whitesides, G.M.: ‘Soft lithographic methods for nano-fabrication’, J. Mater. Chem., 1997, 7, pp. 1069–1074 (doi: 10.1039/a700145b).
-
8)
-
11. Wu, H.-C., Chien, H.-H., Ma, K.-J., Bao, M.-D.: ‘Fabrication of size-tunable Cr nanodots and nanorings array by modified nanosphere lithography’, Micro Nano Lett., 2012, 7, pp. 1056–1059 (doi: 10.1049/mnl.2012.0636).
-
9)
-
S.Y. Chou ,
P.R. Krauss ,
P.J. Renstrom
.
Imprint of sub 25 nm vias and trenches in polymers.
Appl. Phys. Lett.
,
3114 -
3116
-
10)
-
23. Owens, D.K., Wendt, R.: ‘Estimation of the surface free energy of polymers’, J. Appl. Polymer Sci., 1969, 13, pp. 1741–1747 (doi: 10.1002/app.1969.070130815).
-
11)
-
1. Dang, X.D., Tamayo, A.B., Seo, J., Hoven, C.V., Walker, B., Nguyen, T.Q.: ‘Nanostructure and optoelectronic characterization of small molecule bulk heterojunction solar cells by photoconductive atomic force microscopy’, Adv. Funct. Mater., 2010, 20, pp. 14–21 (doi: 10.1002/adfm.201000799).
-
12)
-
B.J.Y. Tan ,
C.H. Sow ,
T.S. Koh ,
K.C. Chin ,
A.T.S. Wee ,
C.K. Ong
.
Fabrication of size-tunable gold nanoparticles array with nanosphere lithography, reactive ion etching, and thermal annealing.
J. Phys. Chem. B
,
11100 -
11109
-
13)
-
19. Vargaftik, N.B., Volkov, B.N., Voljak, L.D.: ‘International tables of the surface tension of water’, J. Phys. Chem. Ref. Data, 1983, 12, p. 817 (doi: 10.1063/1.555688).
-
14)
-
R.N. Wenzel
.
Resistance of solid surfaces to wetting by water.
Ind. Eng. Chem.
,
988 -
994
-
15)
-
10. Han, S., Chen, H.-Y., Chang, K.-L., et al: ‘Effects of MEVVA-implanted chromium on the structure and properties of CrN film’, Thin Solid Films, 2004, 447, pp. 425–429 (doi: 10.1016/S0040-6090(03)01119-2).
-
16)
-
6. Fujita, J., Ohnishi, Y., Ochiai, Y., Matsui, S.: ‘Ultrahigh resolution of calixarene negative resist in electron beam lithography’, Appl. Phys. Lett., 1996, 68, pp. 1297–1299 (doi: 10.1063/1.115958).
-
17)
-
12. Chien, H.-H., Wu, H.-C.: ‘Fabrication of size-tunable hierarchical porous Cr nanoring arrays by modified nanosphere lithography’, Micro Nano Lett., 2012, 7, pp. 1033–1037 (doi: 10.1049/mnl.2012.0479).
-
18)
-
20. Jho, C., Carreras, M.: ‘The effect of viscosity on the drop weight technique for the measurement of dynamic surface tension’, J. Colloid Interf. Sci., 1984, 99, pp. 543–548 (doi: 10.1016/0021-9797(84)90141-3).
-
19)
-
16. Wu, H.-C., Chien, H.-H., Ma, K.-J., Bao, M.-D., Ho, Y.-H.: ‘Fabrication of Cr nanoring arrays by nanosphere lithography for light extraction’, Optoelectron. Adv. Mater., 2012, 6, pp. 1019–1025.
-
20)
-
4. Sun, L., Chien, C.-L.: ‘Searson PC. Fabrication of nanoporous nickel by electrochemical dealloying’, Chem. mater., 2004, 16, pp. 3125–3129 (doi: 10.1021/cm0497881).
-
21)
-
2. Chang, Y.-C., Wu, H.-W., Chen, H.-L., Wang, W.-Y., Chen, L.-J.: ‘Two-dimensional inverse opal ZnO nanorod networks with photonic band gap’, J. Phys. Chem. C, 2009, 113, pp. 14778–14782 (doi: 10.1021/jp904824q).
-
22)
-
M.J.K. Klein ,
M. Guillaumeel ,
B. Wenger
.
Inexpensive and fast wafer-scale fabrication of nanohole arrays in thin gold films for plasmonics.
Nanotechnology
-
23)
-
21. Zhao, Q., Liu, Y., Abel, E.: ‘Effect of temperature on the surface free energy of amorphous carbon films’, J. Colloid Interf. Sci., 2004, 280, pp. 174–183 (doi: 10.1016/j.jcis.2004.07.004).
http://iet.metastore.ingenta.com/content/journals/10.1049/mnl.2014.0013
Related content
content/journals/10.1049/mnl.2014.0013
pub_keyword,iet_inspecKeyword,pub_concept
6
6