Polylactic acid (PLA) was blended with polyethylene glycol (PEG) and spun via a melt-electrospinning system. The effect of PEG content on the PLA melt and the thermal behaviour of the blend was studied using dynamic rheometry and differential scanning calorimetry, respectively. By fitting a rheological model, parameters such as zero-shear viscosity and the relaxation time of polymer chains were obtained. A substantial reduction of zero-shear viscosity and relaxation time by increasing the PEG content from 0 to 30 wt% was observed. Crystallisation peaks shifted to lower temperatures and the crystallinity level increased in PLA/PEG blends against PEG concentration. The results revealed enhanced polymer chain mobility because of the plasticising effect of PEG. Continuous microfibres were obtained by electrospinning of PLA/PEG blends. While neat PLA was not spinnable at the spinning temperature of 200°C, PLA/PEG blends were easily spun and the lowest fibre diameters of 3–6 μm were achieved with 30% PEG loading, at an applied voltage of 70 kV.

References

1. 1)
  - 30. Morrison, F.A.: ‘Understanding rheology’ (Oxford University Press, New York, 2001).
2. 2)
  - K. Nasouri , A.M. Shoushtari , A. Kaflou . Investigation of polyacrylonitrile electrospun nanofibres morphology as a function of polymer concentration, viscosity and Berry number. Micro Nano Lett. , 423 - 426
3. 3)
  - 26. Kulinski, Z., Piorkowska, E.: ‘Crystallization, structure and properties of plasticized poly (L-lactide)’, Polymer, 2005, 46, pp. 10290–10300 (doi: 10.1016/j.polymer.2005.07.101).
4. 4)
  - Y.K. Fuh , L.C. Lien , J.S.C. Jang . Comparative study of polyvinylidene fluoride nanofibrous membranes prepared by continuous near-field and conventional electrospinning processes. Micro Nano Lett. , 376 - 379
5. 5)
  - 33. Hassouna, F., Raquez, J.M., Addiego, F., Dubois, P., Toniazzo, V., Ruch, D.: ‘New approach on the development of plasticized polylactide (PLA): grafting of poly(ethylene glycol) (PEG) via reactive extrusion’, Euro. Polym. J., 2011, 47, pp. 2134–2144 (doi: 10.1016/j.eurpolymj.2011.08.001).
6. 6)
  - 23. Nayak, R., Kyratzis, I.L., Truong, Y.B., Padhye, R., Arnold, L.: ‘Melt-electrospinning of polypropylene with conductive additives’, J. Mater. Sci., 2012, 47, pp. 6387–6396 (doi: 10.1007/s10853-012-6563-3).
7. 7)
  - 8. Kadomae, Y., Maruyama, Y., Sugimoto, M., Taniguchi, T., Koyama, K.: ‘Relation between tacticity and fiber diameter in melt-electrospinning of polypropylene’, Fiber. Polym., 2009, 10, pp. 275–279 (doi: 10.1007/s12221-009-0275-6).
8. 8)
  - 17. Li, X., Liu, H., Wang, J., Li, C.: ‘Preparation and characterization of poly (ɛ-caprolactone) nonwoven mats via melt electrospinning’, Polymer, 2012, 53, pp. 248–253 (doi: 10.1016/j.polymer.2011.11.008).
9. 9)
  - 21. Dalton, P.D., Klinkhammer, K., Salber, J., Klee, D., Moller, M.: ‘Direct in vitro electrospinning with polymer melts’, Biomacromolecules, 2006, 7, pp. 686–690 (doi: 10.1021/bm050777q).
10. 10)
  - 13. Zhou, H., Green, T.B., Joo, Y.L.: ‘The thermal effects on electrospinning of polylactic acid melts’, Polymer, 2006, 47, pp. 7497–7505 (doi: 10.1016/j.polymer.2006.08.042).
11. 11)
  - 15. Shimada, N., Tsutsumi, H., Nakane, K., Ogihara, T., Ogata, N.: ‘Poly(ethylene-co-vinyl alcohol) and nylon 6/12 nanofibers produced by melt electrospinning system equipped with a line-like laser beam melting device’, J. Appl. Polym. Sci., 2010, 116, pp. 2998–3004.
12. 12)
  - 29. Smith, R.: ‘Biodegradable polymers for industrial applications’ (Woodhead Publishing Limited, Cambridge, 2005).
13. 13)
  - 25. Rasal, R.M., Janorkar, A.V., Hirt, D.E.: ‘Poly (lactic acid) modifications’, Prog. Polym. Sci., 2010, 35, pp. 338–356 (doi: 10.1016/j.progpolymsci.2009.12.003).
14. 14)
  - 16. Cho, D., Zhmayev, E., Joo, Y.L.: ‘Structural studies of electrospun nylon 6 fibers from solution and melt’, Polymer, 2011, 52, pp. 4600–4609 (doi: 10.1016/j.polymer.2011.07.038).
15. 15)
  - 20. Karchin, A., Simonovsky, F.I., Ratner, B.D., Sanders, J.E.: ‘Melt electrospinning of biodegradable polyurethane scaffolds’, Acta Biomater., 2011, 7, pp. 3277–3284 (doi: 10.1016/j.actbio.2011.05.017).
16. 16)
  - 14. Ogata, N., Yamaguchi, S., Shimada, N., Lu, G., Iwata, T., Nakane, K., Ogihara, T.: ‘Poly(lactide) nanofibers produced by a melt-electrospinning system with a laser melting device’, J. Appl. Polym. Sci., 2007, 104, pp. 1640–1645 (doi: 10.1002/app.25782).
17. 17)
  - 4. Zhmayev, E., Cho, D., Joo, Y.L.: ‘Nanofibers from gas-assisted polymer melt electrospinning’, Polymer, 2010, 51, pp. 4140–4144 (doi: 10.1016/j.polymer.2010.06.058).
18. 18)
  - 19. Dasdemir, M., Topalbekiroglu, M., Demir, A.: ‘Electrospinning of thermoplastic polyurethane microfibers and nanofibers from polymer solution and melt’, J. Appl. Polym. Sci., 2013, 127, pp. 1901–1908 (doi: 10.1002/app.37503).
19. 19)
  - 9. Lyons, J., Li, C., Ko, F.: ‘Melt-electrospinning. Part I: Processing parameters and geometric properties’, Polymer, 2004, 45, pp. 7597–7603 (doi: 10.1016/j.polymer.2004.08.071).
20. 20)
  - 10. Cao, L., Dong, M., Zhang, A., Liu, Y., Yang, W., Su, Z., Chen, X.: ‘Morphologies and crystal structures of styrene acrylonitrile/isotactic polypropylene ultrafine fibers fabricated by melt electrospinning’, Polym. Eng. Sci., 2013, DOI10.1002/pen.23515.
21. 21)
  - D. Li , Y.N. Xia . Electrospinning of nanofibers: Reinventing the wheel?. Adv. Mater. , 14 , 1151 - 1170
22. 22)
  - 43. Dalton, P.D., Grafahrend, D., Klinkhammer, K., Klee, D., Möller, M.: ‘Electrospinning of polymer melts: phenomenological observations’, Polymer, 2007, 48, (23), pp. 6823–6833 (doi: 10.1016/j.polymer.2007.09.037).
23. 23)
  - 7. Rangkupan, R., Reneker, D.H.: ‘Electrospinning process of molten polypropylene in vacuum’, J. Met. Mater. Minerals, 2003, 12, pp. 81–87.
24. 24)
  - 18. Deng, R., Liu, Y., Ding, Y., Xie, P., Luo, L., Yang, W.: ‘Melt electrospinning of low-density polyethylene having a low-melt flow index’, J. Appl. Polym. Sci., 2009, 114, pp. 166–175 (doi: 10.1002/app.29864).
25. 25)
  - 12. Cho, D., Zhou, H., Cho, Y., Audus, D., Joo, Y.L.: ‘Structural properties and superhydrophobicity of electrospun polypropylene fibers from solution and melt’, Polymer, 2010, 51, pp. 6005–6012 (doi: 10.1016/j.polymer.2010.10.028).
26. 26)
  - 27. Hu, Y., Hu, Y.S., Topolkaraev, V., Hiltner, A., Baer, E.: ‘Crystallization and phase separation in blends of high stereoregular poly(lactide) with poly(ethylene glycol)’, Polymer, 2003, 44, pp. 5681–5689 (doi: 10.1016/S0032-3861(03)00609-8).
27. 27)
  - 6. Kim, J.S., Lee, D.S.: ‘Thermal properties of electrospun polyesters’, Polym. J., 2000, 32, pp. 616–618 (doi: 10.1295/polymj.32.616).
28. 28)
  - 11. Mazalevska, O., Struszczyk, M.H., Krucinska, I.: ‘Design of vascular prostheses by melt electrospinning—structural characterizations’, J. Appl. Polym. Sci., 2013, 129, pp. 779–792 (doi: 10.1002/app.38818).
29. 29)
  - 32. Bousmina, M.: ‘Effect of interfacial tension on linear viscoelastic behavior of immiscible polymer blends’, Rheol. Acta, 1999, 38, pp. 251–254 (doi: 10.1007/s003970050175).
30. 30)
  - 5. Larrondo, L., Manely, R.S.J.: ‘Electrostatic fiber spinning from polymer melts. I. Experimental observations on fiber formation and properties’, J. Polym. Sci., Polym. Phys., 1981, 19, pp. 909–920 (doi: 10.1002/pol.1981.180190601).
31. 31)
  - 24. Detta, N., Brown, T.D., Edin, F.K., Albrecht, K., Chiellini, F., Chiellini, E., Dalton, P.D., Hutmacher, D.W.: ‘Melt electrospinning of polycaprolactone and its blends with poly(ethylene glycol)’, Polym. Inter., 2010, 59, pp. 1558–1562 (doi: 10.1002/pi.2954).
32. 32)
  - 31. Sungsanit, K., Kao, N., Bhattacharya, S.N.: ‘Properties of linear poly (lactic acid)/polyethylene glycol blends’, Polym. Eng. Sci., 2012, 52, pp. 108–116 (doi: 10.1002/pen.22052).

Polylactic acid/polyethylene glycol blend fibres prepared via melt electrospinning: effect of polyethylene glycol content

References

Related content