A reconfigurable X-band microstrip bandpass filter based on the stepped impedance resonator topology with two folded stubs is proposed. Reconfiguration is enabled in the microstrip filter using positive–intrinsic–negative (PIN) diode and the proposed filter performs frequency switching between uplink and downlink X-band services. The prototype filter is realised ideally using open-circuit and short-circuit conditions that are designed in a way similar to the design using PIN diodes that provide the same results. From the simulation and measured results, it is inferred that by altering the ON/OFF states, the filter can work from downlink frequency range of 7.25–7.9 GHz to the uplink frequency range of 8.00–8.4 GHz. Comprehensive studies are conducted on a fabricated prototype to assess its performance from which encouraging results are obtained.