Overview of different wind generator systems and their comparisons
Overview of different wind generator systems and their comparisons
- Author(s): H. Li and Z. Chen
- DOI: 10.1049/iet-rpg:20070044
For access to this article, please select a purchase option:
Buy article PDF
Buy Knowledge Pack
IET members benefit from discounts to all IET publications and free access to E&T Magazine. If you are an IET member, log in to your account and the discounts will automatically be applied.
Thank you
Your recommendation has been sent to your librarian.
- Author(s): H. Li 1 and Z. Chen 1
-
-
View affiliations
-
Affiliations:
1: Institute of Energy Technology, Aalborg University, Aalborg East, Denmark
-
Affiliations:
1: Institute of Energy Technology, Aalborg University, Aalborg East, Denmark
- Source:
Volume 2, Issue 2,
June 2008,
p.
123 – 138
DOI: 10.1049/iet-rpg:20070044 , Print ISSN 1752-1416, Online ISSN 1752-1424
- « Previous Article
- Table of contents
- Next Article »
With rapid development of wind power technologies and significant growth of wind power capacity installed worldwide, various wind turbine concepts have been developed. The wind energy conversion system is demanded to be more cost-competitive, so that comparisons of different wind generator systems are necessary. An overview of different wind generator systems and their comparisons are presented. First, the contemporary wind turbines are classified with respect to both their control features and drive train types, and their strengths and weaknesses are described. The promising permanent magnet generator types are also investigated. Then, the quantitative comparison and market penetration of different wind generator systems are presented. Finally, the developing trends of wind generator systems and appropriate comparison criteria are discussed. It is shown that variable speed concepts with power electronics will continue to dominate and be very promising technologies for large wind farms. The future success of different wind turbine concepts may strongly depend on their ability of complying with both market expectations and the requirements of grid utility companies.
Inspec keywords: wind power; wind turbines; power grids
Other keywords:
Subjects: Wind power plants; Wind energy
References
-
-
1)
- A.D. Hansen , L.H. Hansen . Wind turbine concept market penetration over 10 years (1995–2004). Wind Energy , 1 , 81 - 97
-
2)
- Gamesa Elórica, available at: http://www.gamesa.es/gamesa/index.html, accessed September 2006.
-
3)
- Harris, M.R., Pajooman, G.H., Sharkh, S.M.A.: `Comparison of alternative topologies for VRPM(transverse-flux) electrical machines', Proc. 1997 IEE Colloquium on New Topologies for PM Machines, p. 2/1–2/7.
-
4)
- Suzlon Energy, available at: http://www.suzlon.com/product_overview.htm, accessed September 2006.
-
5)
- Hansen, L.H., Helle, L., Blaabjerg, F.: `Conceptual survey of generators and power electronics for wind turbines', Riso National Laboratory, Technical Report Riso-R-1205(EN), December 2001, Roskilde, Denmark.
-
6)
- DeWind, available at: http://www.dewind.de, accessed September 2006.
-
7)
- Lampola, P.: `Directly driven, low-speed permanent-magnet generators for wind power applications', 2000, PhD, Helsinki University of Technology, Finland.
-
8)
- R. Harrison , E. Hau , H. Snel . (2000) Large wind turbines design and economics.
-
9)
- Carlson, O., Grauers, A., Svensson, J.: `A comparison of electrical systems for variable speed operation of wind turbines', European wind energy conf., 1994, p. 500–505.
-
10)
- Chen, Z.: `Issues of connecting wind farms into power systems', Proc. 2005 IEEE/PES Transmission and Distribution Conf. and Exhibition: Asia and Pacific (Invited paper panel presentation paper).
-
11)
- Aydin, M., Huang, S., Lipo, T.A.: `Axial flux permanent magnet disc machines: a review', Research Report, 2004.
-
12)
- Siemens AG, available at: http://www.powergeneration.siemens.com/en/windpower/products/index.cfm, accessed September 2006.
-
13)
- Ecotècnia, available at: http://www.ecotecnia.com/index_ing.htm, accessed September 2006.
-
14)
- H. Polinder , J. Morren . Developments in wind turbine generator systems.
-
15)
- ‘Global wind energy council (GWEC) global wind 2006 report’. available at: http://www.gwec.net/uploads/media/gwec-2006_final.pdf.
-
16)
- Z. Chen , F. Blaabjerg . Wind turbines-a cost effective power source. Przeglad Elektrotechniczny , 5 , 464 - 469
-
17)
- Runcos, F., Carlson, R., Oliveira, A.M.: `Performance analysis of a brushless double fed cage induction generator', Nordic Wind Power Conf. (NWPC04), 1–2 March 2004, Göteborg, Sweden, Chalmers University of Technology.
-
18)
- Versteegh, C.J.A., Hassan, G.: `Design of the Zephyros Z72 wind turbine with emphasis on the direct drive PM generator', NORPIE 2004NTNU, 14–16 June 2004, Trondheim Norway.
-
19)
- Bianchi, N., Lorenzoni, A.: `Performance magnet generators for wind power industry: an overall comparison with traditional generators', Opportunities and Advances in Int. Power generation, 18–20 March 1996, p. 49–54.
-
20)
- Hanitsch, R., Korouji, G.: `Design and constructing of a permanent magnet wind energy generator with a new topology', KOMEL Conf., May 2004, Poland, p. 63–66.
-
21)
- SØRensen, P., Bak-Jensen, B., Kristian, J.: `Power plant characteristics of wind farms', Wind Power for the 21st Century Proc. Int. Conf., 2000, Kassel, p. 176–179.
-
22)
- W. Wu , E. Spooner , B.J. Chalmers . Design of slotless TORUS generators with reduced voltage regulation. IEE Proc., Electr. Power Appl. , 5 , 337 - 343
-
23)
- Wu, W., Spooner, E., Chalmers, B.J.: `Reducing voltage regulation in toroidal permanent-magnet generators by stator saturation', Proc. 1995 IEE Conf. Elec. Mach. and Drives, p. 385–389.
-
24)
- Bywaters, G., John, V., Lynch, J.: `Northern power systems windPACT drive train alternative design study report.', Report no. NREL/SR-500-35524, NREL, October 2004, Golden, Colorado.
-
25)
- GE energy, available at: http://www.gepower.com/prod_serv/products/wind_turbines/en/index.htm, accessed September 2006.
-
26)
- Z. Chen , F. Blaabjerg . Wind energy-the world's fastest growing energy source. IEEE Power Electron. Soc. Newsl. , 3 , 15 - 19
-
27)
- Dubois, M.R.: `Optimized permanent magnet generator topologies for direct-drive wind turbines', 2004, PhD, Delft University Technology, Delft, The Netherlands.
-
28)
- Nordex AG, available at: http://www.nordex-online.com/en/products-services/wind-turbines.html, accessed September 2006.
-
29)
- J. Chen , C. Nayar , L. Xu . Design and finite-element analysis of an outer rotor permanent-magnet generator for directly-coupled wind turbine applications. Proc. IEEE Trans. Magn. , 5 , 3802 - 3809
-
30)
- Poore, R., Lettenmaier, T.: `Alternative design study report: windPACT advanced wind turbine drive train designs study', Report no. NREL/SR-500-33196, NREL, August 2003, Golden, Colorado.
-
31)
- Multibrid, available at: http://www.multibrid.com/m5000/data.html, accessed September 2006.
-
32)
- H. Polinder , S.W.H. De Haan , M.R. Dubois . Basic operation principles and electrical conversion systems of wind turbines. EPE J. , 4 , 43 - 50
-
33)
- I. Boldea . (2005) The electric generators handbook - variable speed generators.
-
34)
- Erlich, I., Winter, W., Dittrich, A.: `Advanced grid requirements for the integration of wind turbines into the German transmission system', IEEE Power Engineering Society General Meeting, 18–22 June 2006.
-
35)
- Böhmeke, G., Boldt, R., Beneke, H.: `Geared drive intermediate solutions, comparisons of design features and operating economics', Proc. 1997 Europ. Wind Energy Conf., p. 664–667.
-
36)
- E. Spooner , B.J. Chalmers . TORUS: a slotless, toroidal-stator, permanent-magnet generator. IEE Proc. B , 6 , 497 - 506
-
37)
- Böhmeke, G., Boldt, R., Beneke, H.: `Geared drive intermediate solutions-comparisons of design features and operating economics', Proc. 1997 Europ. Wind Energy Conf, p. 664–667.
-
38)
- H. Suresh , V. Guruprasada Rau . Normalized power curves as a tool for identification of optimum wind turbine generator parameters. IEEE Trans. Energy Convers. , 3 , 283 - 288
-
39)
- Repower systems AG, available at: http://www.repower.de/index.php?id=12&L=1, accessed September 2006.
-
40)
- D.A. Torrey . Switched reluctance generators and their control. IEEE Trans. Indus. Electron. , 1 , 3 - 14
-
41)
- Tavner, P.J., Xiang, J.: `Wind turbine reliability, how does it compare with other embedded generation sources', Proc. IEE Rel. Transmission Distrib. Netw. Conf., February 2005, London, UK, p. 243–248.
-
42)
- Clipper windpower inc., available at: http://www.clipperwind.com/techspecs.php, accessed August, 2007.
-
43)
- F. Blaabjerg , Z. Chen , S.B. Kjaer . Power electronics as efficient interface in dispersed power generation systems. IEEE Trans. Power Electron. , 5 , 1184 - 1194
-
44)
- Vestas wind systems, available at: http://www.vestas.com/vestas/global/en/Downloads/Downloads/Download_brochurer.htm, accessed September 2006.
-
45)
- BTM Consults: ‘International wind energy department – world market update 2004, Forecast 2005–2009’. A. Rasmussens, Ringkøbing, Denmark, 2005.
-
46)
- Widyan, M.S.: `Design, optimization, construction and test of rare-earth permanent-magnet electrical machines with new topology for wind energy applications', July 2006, PhD, Elektrotechnik und Informatik der Technischen Universität, Berlin.
-
47)
- Parviainen, A.: `Design of axial-flux permanent-magnet low-speed machines and performance comparison between radial-flux and axial-flux machines', 2005, PhD, Acta universitatis Lappeenrantaensis.
-
48)
- Dubois, M.R., Polinder, H., Ferreira, J.A.: `Comparison of generator topologies for direct-drive wind turbines', Proc. Nordic Countries Power and Industrial Electronics Conf. (NORPIE), June 2000, Aalborg, Denmark.
-
49)
- Grauers, A.: `Design of direct-driven permanent-magnet generators for wind turbines', 1996, PhD, Chalmers University of Technology, Goteburg.
-
50)
- Dubois, M.R.: `Review of electromechanical conversion in wind turbines', Repore EPP00.R03, April 2000.
-
51)
- Soens, J.: `Impact of wind energy in a future', December 2005, PhD, Wettelijk depot, UDC 621.548.
-
52)
- Chen, Y., Pillay, P.: `Axial-flux PM wind generator with a soft magnetic composite core', Proc. 2005 IEEE Conf. Ind. Appl., p. 231–237.
-
53)
- Y. Chen , P. Pillay , A. Khan . PM wind generator topologies. IEEE Trans. Indus. Appl. , 6 , 1619 - 1626
-
54)
- H. Polinder , F.F.A. Van Der Pijl , G.J. De Vilder . Comparison of direct-drive and geared generator concepts for wind turbines. IEEE Trans. Energy Convers. , 725 - 733
-
55)
- S. Siegfriedsen , G. Böhmeke . Multibrid technology – a significant step to multi-megawatt wind turbines. Wind Energy , 89 - 100
-
56)
- Winwind OY, available at: http://www.winwind.fi/english/tuotteet.html, accessed September 2006.
-
57)
- E. Spooner , A.C. Williamson . Direct coupled, permanent magnet generators for wind turbine applications. IEE Proc., Electr. Power Appl. , 1 , 1 - 8
-
58)
- Harakosan Europe BV, available at: http://www.harakosan.nl/products/, accessed November 2006.
-
59)
- ENERCON GmbH, available at: http://www.enercon.de/en/_home.htm, accessed November 2006.
-
60)
- Annon, : `European wind turbine catalogue', European commission, 1996, Brussels, Belgium, p. 64–67.
-
1)