access icon free Performance of oil palm frond gasification using medium-scale downdraft gasification for electricity generation

This paper focuses on the performance of Oil Palm Frond (OPF) gasification, using a medium-scale downdraft gasification system with a reactor capacity of 500 kg of feedstock. The gasification process was carried out at standard operating conditions, with a feed rate of 158 kg/h and a reactor temperature range of 700–800°C. The performance of OPF gasification was evaluated by monitoring the composition of syngas components, the calorific value of the syngas, the syngas flow rate, and the gasification cold gas efficiency. The results show that the OPF gasification performance improves when the reactor temperature is increased. The syngas calorific value, syngas flow rate and gasification cold gas efficiency are in the range of 4.49–5.15 MJ/Nm3, 207–311 m3/hour, and 37–65% respectively. In terms of the syngas composition, CO, H2, CH4, and CO2, are in the ranges 16.29–17.62%, 10.56–10.83%, 5.96–7.40%, and 17.96–18.35% respectively. The best syngas characteristics were obtained at the highest temperature of 770°C. At this temperature and feed rate, and using typical gas engine with 30% efficiency, the electricity that can be generated is calculated to be 136 kWe. Due to its favourable performance, OPF gasification with this scale is a promising process for renewable power generation.

Inspec keywords: syngas; vegetable oils; biofuel; internal combustion engines; fuel gasification; internal conversion

Other keywords: electricity generation; renewable power generation; downdraft gasiflcation system; syngas flow rate; calorific value; gasification process; OPF gasification performance; standard gas engine; gasification cold gas efficiency; syngas components; syngas composition; temperature 700 C to 800 C; medium-scale downdraft gasification; oil palm frond gasification performance

Subjects: Engines; Fuel processing industry; Photosynthesis and bioenergy conversion; Biofuel and biomass resources; Biotechnology industry

References

    1. 1)
    2. 2)
    3. 3)
      • 14. Malaysia Palm Oil Board (MPOB) 2011. Economic and Statistics (Economic and Industry Development Division), http://www.mpob.gov.my/, accessed 18 May 2014.
    4. 4)
      • 18. Sulaiman, F., Abdullah, N., Gerhauser, H., Shariff, A.: ‘An outlook of Malaysian energy , oil palm industry and its utilization of wastes as useful resources’, Biomass Bioenergy, 2011, 35, pp. 37753786.
    5. 5)
      • 12. Gao, N., Li, A., Quan, C., Qu, Y., Mao, L.: ‘Characteristics of hydrogen-rich gas production of biomass gasification with porous ceramic reforming’, Int. J. Hydrogen Energy., 2012, 7, pp. 210.
    6. 6)
    7. 7)
    8. 8)
    9. 9)
    10. 10)
    11. 11)
    12. 12)
    13. 13)
    14. 14)
      • 1. U.S Energy Information Administration: http://www.eia.gov/forecasts/i/eo, accessed 18 May 2014.
    15. 15)
    16. 16)
    17. 17)
    18. 18)
    19. 19)
    20. 20)
    21. 21)
    22. 22)
    23. 23)
    24. 24)
    25. 25)
      • 4. British Petroleum, http://www.bp.com/sectiongenericarticle800.do?categoryId=9037746&contentId=7069344, accessed 18 May 2014.
    26. 26)
    27. 27)
    28. 28)
    29. 29)
    30. 30)
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-rpg.2014.0133
Loading

Related content

content/journals/10.1049/iet-rpg.2014.0133
pub_keyword,iet_inspecKeyword,pub_concept
6
6
Loading