Real-time control of hybrid active power filter using conservative power theory in industrial power system

Venkata Subrahmanya Raghavendra Varaprasad Oruganti; Abdullah Saad Bubshait; Venkata Sesha Samba Siva Sarma Dhanikonda; Marcelo Godoy Simões

Real-time control of hybrid active power filter using conservative power theory in industrial power system

View Fulltext

Author(s): Venkata Subrahmanya Raghavendra Varaprasad Oruganti ¹ ; Abdullah Saad Bubshait ² ; Venkata Sesha Samba Siva Sarma Dhanikonda ¹ ; Marcelo Godoy Simões ²
- Affiliations: 1: Department of Electrical Engineering, National Institute of Technology Warangal, Warangal, India ;
  2: Department of EECS, Colorado School of Mines, Golden, CO, USA
Source: Volume 10, Issue 2, 10 February 2017, p. 196 – 207
DOI: 10.1049/iet-pel.2015.1005 , Print ISSN 1755-4535, Online ISSN 1755-4543

Received 10/12/2015, Accepted 21/09/2016, Revised 21/09/2016, Published 10/02/2017

Industrial power system consists of several linear and non-linear loads. The proliferation of non-linear loads in power system causes the power system harmonics. Passive filters (PFs) are one of the ancient solutions to mitigate the harmonics. Some of the industrial power systems use PFs for harmonic compensation. Owing to dynamic load variation, the PFs are not the appropriate solution for harmonic compensation. To improve the system performance with existing PFs, this study presents the conservative power theory (CPT)-based hybrid active power filter (HAPF) with Type-II current controller for compensation of harmonics, reactive power and also the unbalance caused by different linear and non-linear loads of an industrial power system. In this system, the CPT is used as a harmonic reference generator and Type-II controller is designed for current control operation. The proposed HAPF overcomes the drawbacks of PFs and performs the compensation tasks effectively. The industrial power system with the proposed HAPF is modelled in MATLAB/Simulink environment and implemented in the real-time (RT) using OPAL-RT-based RT simulator. The RT results are in compliance with IEEE 519-2014 standard.

References

1. 1)
  - 1. Das, J.: ‘Power system harmonics and passive filter designs’ (New Jersey, Wiley-IEEE Press, 2015).
2. 2)
  - 16. Balci, M.E., Hocaoglu, M.H.: ‘Quantitative comparison of power decompositions’, Electr. Power Syst. Res., 2008, 78, (3), pp. 318–329 (doi: 10.1016/j.epsr.2007.02.010).
3. 3)
  - 25. Haddad, M., Ktata, S., Rahmani, S., et al: ‘Real time simulation and experimental validation of active power filter operation and control’ (Mathematics and Computers in Simulation, Elsevier B.V., 2015), doi:10.1016/j.matcom.2015.09.007.
4. 4)
  - 11. Rahmani, S., Hamadi, A., Al-Haddad, K., et al: ‘A combination of shunt hybrid power filter and thyristor-controlled reactor for power quality’, IEEE Trans. Ind. Electron., 2014, 61, (5), pp. 2152–2164 (doi: 10.1109/TIE.2013.2272271).
5. 5)
  - 10. Singh, B., Al-Haddad, K., Chandra, A.: ‘A review of active filters for power quality improvement’, IEEE Trans. Ind. Electron., 1999, 46, (5), pp. 960–971 (doi: 10.1109/41.793345).
6. 6)
  - 25. Lam, C.-S., Cui, X.-X., Choi, W.-H., et al: ‘Minimum inverter capacity design for three-phase four-wire LC-hybrid active power filters’, IET Power Electron., 2012, 5, (7), pp. 956–968 (doi: 10.1049/iet-pel.2011.0436).
7. 7)
  - 24. Ghosh, A., Banerjee, S.: ‘Design and implementation of type-II compensator in DC–DC switch-mode step-up power supply’. IEEE Third Int. Conf. on Computer, Communication, Control and Information Technology (C3IT-2015), Academy of Technology, Hooghly, India, 7–8 February 2015, pp. 1–5, doi: 10.1109/C3IT.2015.7060164.
8. 8)
  - 17. Balci, M.E., Hocaoglu, M.H.: ‘A power resolution for nonsinusoidal and unbalanced systems – part II: theoretical background’. Proc. Seventh IEEE Int. Conf. on Electrical and Electronics Engineering (ELECO), December 2011, pp. I-173–I-178.
9. 9)
  - 21. Mortezaei, A., Godoy Simões, M., Marafao, F.P.: ‘Cooperative operation based master-slave in islanded microgrid with CPT current decomposition’. Proc. IEEE Power & Energy Society General Meeting, Denver, CO, USA, July 2015, pp. 1–5.
10. 10)
  - 27. Bélanger, J., Venne, P., Paquin, J.N.: ‘The what, where and why of real-time simulation’. Proc. Planet RT, 2010, pp. 37–49.
11. 11)
  - 13. Akagi, H., Watanabe, E.H., Aredes, M.: ‘Instantaneous power theory and applications for power conditioning’ (New Jersey, Wiley-IEEE Press, 2007), pp. 41–102.
12. 12)
  - 21. Akagi, H.: ‘Active harmonic filters’, Proc. IEEE, 2005, 93, (12), pp. 2128–2141 (doi: 10.1109/JPROC.2005.859603).
13. 13)
  - 29. IEEE 519-2014: ‘IEEE recommended practice and requirements for harmonic control in electric power systems’, 2014.
14. 14)
  - 23. Hart, D.W.: ‘Power electronics’ (India, Tata McGraw-Hill Education, 2011).
15. 15)
  - 3. Litran, S.P., Salmeron, P.: ‘Analysis and design of different control strategies of hybrid active power filter based on the state model’, IET Power Electron., 2012, 5, (8), pp. 1341–1350 (doi: 10.1049/iet-pel.2012.0055).
16. 16)
  - 18. Balci, M.E., Hocaoglu, M.H.: ‘Addendum to a power resolution for nonsinusoidal and unbalanced systems: evaluation examples’. Proc. Seventh IEEE Int. Conf. on Electrical and Electronics Engineering (ELECO), December 2011, pp. I-179–I-182.
17. 17)
  - 3. Das, J.: ‘Passive filters-potentialities and limitations’, IEEE Trans. Ind. Appl., 2004, 40, pp. 232–241 (doi: 10.1109/TIA.2003.821666).
18. 18)
  - 20. Mortezaei, A., Lute, C., Godoy Simões, M., et al: ‘PQ, DQ and CPT control methods for shunt active compensators – a comparative study’. Proc. IEEE Energy Conversion Congress and Exposition (ECCE), Pittsburgh, PA, USA, September 2014, pp. 2994–3001.
19. 19)
  - 14. Asiminoaei, L., Blaabjerg, F., Hansen, S.: ‘Detection is key-harmonic detection methods for active power filter applications’, IEEE Ind. Appl. Mag., 2007, 13, (4), pp. 22–33 (doi: 10.1109/MIA.2007.4283506).
20. 20)
  - 9. Patel, R., Panda, A.K.: ‘Real time implementation of PI and fuzzy logic controller based 3-phase 4-wire interleaved buck active power filter for mitigation of harmonics with the id–iq control strategy’, Int J Electr. Power Energy Syst., 2014, 59, pp. 66–78 (doi: 10.1016/j.ijepes.2014.01.021).
21. 21)
  - 22. Yazdani, A., Iravani, R.: ‘Voltage-sourced converters in power systems: modeling, control, and applications’ (New Jersey, John Wiley & Sons, 2010), pp. 160–203.
22. 22)
  - 14. Tenti, P., Paredes, H.K.M., Mattavelli, P.: ‘Conservative power theory, a framework to approach control and accountability issues in smart microgrids’, IEEE Trans. Power Electron., 2011, 26, (3), pp. 664–673 (doi: 10.1109/TPEL.2010.2093153).
23. 23)
  - 15. Maciążek, M.: ‘Power theories applications to control active compensators’, in Benysek, G., Pasko, M. (Eds): ‘Power theories for improved power quality’ (Springer, London, 2012), pp. 49–116.
24. 24)
  - 4. Maciążek, M., Grabowski, D., Pasko, M., et al: ‘Compensation based on active power filters – the cost minimization’, Appl. Math. Comput., 2015, 267, pp. 648–654.
25. 25)
  - 10. Lee, T.L., Wang, Y.C., Li, J.C., et al: ‘Hybrid active filter with variable conductance for harmonic resonance suppression in industrial power systems’, IEEE Trans. Ind. Electron., 2015, 62, (2), pp. 746–756 (doi: 10.1109/TIE.2014.2347008).
26. 26)
  - 28. IEEE 1159-2009: ‘IEEE recommended practice for monitoring electric power quality’, 2009.
27. 27)
  - 2. Arrillaga, J., Bradley, D.A., Bodger, P.S.: ‘Power system harmonics’ (UK, Wiley, 1985).
28. 28)
  - 27. Fujita, H., Yamasaki, T., Akagi, H.: ‘A hybrid active filter for damping of harmonic resonance in industrial power systems’, IEEE Trans. Power Electron., 2000, 15, (2), pp. 215–222 (doi: 10.1109/63.838093).
29. 29)
  - 31. Lam, C.-S., Wong, M.-C., Han, Y.-D.: ‘Hysteresis current control of hybrid active power filters’, IET Power Electron., 2012, 5, (7), pp. 1175–1187 (doi: 10.1049/iet-pel.2011.0300).

Login

Not registered yet?

Share

Tools

Login to add to favourites

Key

Real-time control of hybrid active power filter using conservative power theory in industrial power system

References

Related content