© The Institution of Engineering and Technology
Three-dimensional space-vector modulation (3D SVM) has more popularity among the other modulation techniques of the four-leg inverter due to higher DC-link voltage utilisation. Sequencing schemes of the switching vectors in the 3D SVM are divided into Class I and II categories. Each of these classes itself has four kinds: (a) rising-edge aligned, (b) falling-edge aligned, (c) symmetrically aligned and (d) alternative sequence. In this study, implementation of the conventional 3D SVM technique in abc-coordinate for four-leg voltage source inverters is simplified, while it can be so easily adopted in all kinds of sequencing schemes. Unlike conventional techniques, the proposed technique needs no switching vector determination and duty ratio calculation as well as reduces the computational burden. In this technique, turn-on interval of the upper switches, in every switching period, is calculated without need of a look-up table and complex equations. Applying the dead time by software is very straightforward in the proposed technique. In addition, by simplification of the proposed modulation technique, it can be applied to the three-leg inverters. Simulation results in PSCAD/EMTDC environment confirm the validity and effectiveness of the proposed technique. Experimental results are also provided to confirm the validity of the new approach.
References
-
-
1)
-
11. Ojo, O., Kshirsagar, P., Osaloni, O.: ‘Concise modulation strategies for four-leg voltage source inverters’. Proc. IEEE-PESC'02 Conf., 2002, pp. 238–243.
-
2)
-
21. Zhang, F., Yan, Y.: ‘Selective harmonic elimination PWM control scheme on a three-phase four-leg voltage source inverter’, IEEE Trans. Power Electron., 2009, 24, pp. 1682–1689 (doi: 10.1109/TPEL.2009.2014378).
-
3)
-
12. Khadkikar, V., Chandra, A., Singh, B.: ‘Digital signal processor implementation and performance evaluation of split capacitor, four leg and three H-bridge-based three-phase four-wire shunt active filters’, IET Power Electron, 2011, 4, (4), pp. 463–470 (doi: 10.1049/iet-pel.2010.0198).
-
4)
-
15. Acuna, P., Moran, L., Rivera, M., Dixon, J., Rodriguez, J.: ‘Improved active power filter performance for renewable power generation systems’, IEEE Trans. Power Electron., 2014, 29, (2), pp. 687–694 (doi: 10.1109/TPEL.2013.2257854).
-
5)
-
6. Converters, F.V., Zhang, R., Prasad, V.H., et al: ‘Three-dimensional space vector modulation for four-Leg voltage-source converters’, IEEE Trans Power Electron., 2002, 17, (3), pp. 314–326 (doi: 10.1109/TPEL.2002.1004239).
-
6)
-
17. Ebrahimzadeh, E., Farhangi, S., Iman-Eini, H.: ‘A modulation technique for four-leg voltage source inverter without needing the look-up table’. Proc. Power Electronics, Drive Systems and Technologies Conf., IEEE-PEDSTC'14 Conf., 2014, pp. 227–232.
-
7)
-
14. Liu, D., Guan, M., Zhang, L., et al: ‘Research on the three-phase four-leg aeronautical static inverter based on three-dimensional space vector modulation in abc coordinates’. Proc. IEEE-ICEMI'09 Conf., 2009, pp. 729–732.
-
8)
-
15. Hari, V., Narayanan, G.: ‘Space-vector-based hybrid pulse width modulation technique to reduce line current distortion in induction motor drives’, IET Power Electron., 2012, 5, (8), pp. 1463–1471 (doi: 10.1049/iet-pel.2012.0078).
-
9)
-
12. Mohd, A., Ortjohann, E., Hamsic, N., et al: ‘Control strategy and space vector modulation for three-leg four-wire voltage source inverters under unbalanced load conditions’, IET Power Electron., 2010, 3, pp. 323–333 (doi: 10.1049/iet-pel.2008.0281).
-
10)
-
18. Liu, C., Lai, J., Lee, F.C., et al: ‘Common-mode components comparison for different SVM schemes in three-phase four-legged converter’. Proc. IEEE IPEMC, August 2000, vol. 2, pp. 633–638.
-
11)
-
9. Kim, J., Sul, S.: ‘A carrier-based PWM method for three-phase four-leg voltage source converters’, IEEE Trans. Power Electron., 2004, 19, (1), pp. 66–75 (doi: 10.1109/TPEL.2003.820559).
-
12)
-
15. Rui, W., Shaojun, X.: ‘Research of the four-leg voltage source inverters based on space vector modulation in abc coordinates’.Proc. IEEE-ICEMS05 Conf., 2005, pp. 1442–1446.
-
13)
-
27. Balikci, A., Akpinar, E.: ‘A three-phase four-wire static synchronous compensator with reduced number of switches for unbalanced loads’, IET Power Electron., 2014, 7, (6), pp. 1630–1643 (doi: 10.1049/iet-pel.2013.0535).
-
14)
-
2. Ebrahimzadeh, E., Farhangi, S., Iman-Eini, H., et al: ‘Improved phasor estimation method for dynamic voltage restorer applications’, IEEE Trans. Power Deliv., 2015, 30, (3), pp. 1467–1477 (doi: 10.1109/TPWRD.2014.2366241).
-
15)
-
7. Jahns, T.M., De Doncker, R.W.A.A., Radun, A.V., et al: ‘System design considerations for a high-power aerospace resonant link converter’, IEEE Trans. Power Electron., 1993, 8, (4), pp. 663–672 (doi: 10.1109/63.261040).
-
16)
-
26. Zhang, L., Waite, M.J., Chong, B.: ‘Three-phase four-leg flying-capacitor multi-level inverter-based active power filter for unbalanced current operation’, IET Power Electron., 2013, 6, pp. 153–163 (doi: 10.1049/iet-pel.2012.0317).
-
17)
-
13. Perales, M.A., Prats, M.M., Portillo, R., et al: ‘Three-dimensional space vector modulation in abc coordinates for four-leg voltage source converters’, IEEE Power Electron. Lett., 2003, 1, (4), pp. 104–109 (doi: 10.1109/LPEL.2004.825553).
-
18)
-
8. Ali, S.M., Kazmierkowski, M.P.: ‘Current regulation of four-leg PWM-VSI’. Proc. IEEE-IECON'98 Conf., 1998, pp. 1853–1858.
-
19)
-
16. Cai, K., Zheng, Z., Li, G., et al: ‘Based on abc coordinates space vector control of three-phase four-leg inverter power supply simulation’.Proc. IEEE-ICECE'10 Conf., 2010, pp. 3410–3415.
-
20)
-
20. Ebrahimzadeh, E.: ‘Dynamic voltage restorer based on a four-leg inverter for balanced and unbalanced voltage sags compensation’. (University of Tehran, 2013), in Persian.
http://iet.metastore.ingenta.com/content/journals/10.1049/iet-pel.2015.0310
Related content
content/journals/10.1049/iet-pel.2015.0310
pub_keyword,iet_inspecKeyword,pub_concept
6
6